rowid,title,contents,year,author,author_slug,published,url,topic 102,Art Directing with Looking Room,"Using photographic composition techniques to start to art direct on the template-driven web. Think back to last night. There you are, settled down in front of the TV, watching your favourite soap opera, with nice hot cup of tea in hand. Did you notice – whilst engrossed in the latest love-triangle – that the cameraman has worked very hard to support your eye’s natural movement on-screen? He’s carefully framed individual shots to create balance. Think back to last week. There you were, sat with your mates watching the big match. Did you notice that the cameraman frames the shot to go with the direction of play? A player moving right will always be framed so that he is on the far left, with plenty of ‘room’ to run into. Both of these cameramen use a technique called Looking Room, sometimes called Lead Room. Looking Room is the space between the subject (be it a football, or a face), and the edge of the screen. Specifically, Looking Room is the negative space on the side the subject is looking or moving. The great thing is, it’s not just limited to photography, film or television; we can use it in web design too. Basic Framing Before we get into Looking Room, and how it applies to web, we need to have a look at some basics of photographic composition. Many web sites use imagery, or photographs, to enhance the content. But even with professionally shot photographs, without a basic understanding of framing or composition, you can damage how the image is perceived. A simple, easy way to make photographs more interesting is to fill the frame. Take this rather mundane photograph of a horse: A typical point and click affair. But, we can work with this. By closely cropping, and filling the frame, we can instantly change the mood of the shot. I’ve also added Looking Room on the right of the horse. This is space that the horse would be walking into. It gives the photograph movement. Subject, Space, and Movement Generally speaking, a portrait photograph will have a subject and space around them. Visual interest in portrait photography can come from movement; how the eye moves around the shot. To get the eye moving, the photographer modifies the space around the subject. Look at this portrait: The photography has framed the subject on the right, allowing for whitespace, or Looking Room, in the direction the subject is looking. The framing of the subject (1), with the space to the left (2) – the Looking Room – creates movement, shown by the arrow (3). Note the subject is not framed centrally (shown by the lighter dotted line). If the photographer had framed the subject with equal space either side, the resulting composition is static, like our horse. If the photographer framed the subject way over on the left, as she is looking that way, the resulting whitespace on the right leads a very uncomfortable composition. The root of this discomfort is what the framing is telling our eye to do. The subject, looking to the left, suggests to us that we should do the same. However, the Looking Room on the right is telling our eye to occupy this space. The result is a confusing back and forth. How Looking Room applies to the web We can apply the same theory to laying out a web page or application. Taking the three same elements – Subject, Space, and resulting Movement – we can guide a user’s eye to the elements we need to. As designers, or content editors, framing photographs correctly can have a subtle but important effect on how a page is visually scanned. Take this example: The BBC homepage uses great photography as a way of promoting content. Here, they have cropped the main photograph to guide the user’s eye into the content. By applying the same theory, the designer or content editor has applied considerable Looking Room (2) to the photograph to create balance with the overall page design, but also to create movement of the user’s eye toward the content (1) If the image was flipped horizontally. The Looking Room is now on the right. The subject of the photograph is looking off the page, drawing the user’s eye away from the content. Once again, this results in a confusing back and forth as your eye fights its way over to the left of the page. A little bit of Art Direction Art Direction can be described as the act or process of managing the visual presentation of content. Art Direction is difficult to do on the web, because content and presentation are, more often than not, separated. But where there are images, and when we know the templates that those images will populate, we can go a little way to bridging the gap between content and presentation. By understanding the value of framing and Looking Room, and the fact that it extends beyond just a good looking photograph, we can start to see photography playing more of an integral role in the communication of content. We won’t just be populating templates. We’ll be art directing. Photo credits: Portrait by Carsten Tolkmit Horse by Mike Pedroncelli",2008,Mark Boulton,markboulton,2008-12-05T00:00:00+00:00,https://24ways.org/2008/art-directing-with-looking-room/,design 108,A Festive Type Folly,"‘Tis the season to be jolly, so the carol singers tell us. At 24 ways, we’re keeping alive another British tradition that includes the odd faux-Greco-Roman building dotted around the British countryside, Tower Bridge built in 1894, and your Dad’s Christmas jumper with the dancing reindeer motif. ‘Tis the season of the folly! 24 Ways to impress your friends The example is not an image, just text. You may wish to see a screenshot in Safari to compare with your own operating system and browser rendering. Like all follies this is an embellishment — a bit of web typography fun. It’s similar to the masthead text at my place, but it’s also a hyperlink. Unlike the architectural follies of the past, no child labour was used to fund or build it, just some HTML flavoured with CSS, and a heavy dose of Times New Roman. Why Times New Roman, you ask? Well, after a few wasted hours experimenting with heaps of typefaces, seeking an elusive consistency of positioning and rendering across platforms, it proved to be the most consistent. Who’d‘a thought? To make things more interesting, I wanted to use a traditional scale and make the whole thing elastic by using relative lengths that would react to a person’s font size. So, to the meat of this festive frippery: There are three things we rely on to create this indulgence: Descendant selectors Absolute positioning Inheritance HTML & Descendant Selectors The markup for the folly might seem complex at first glance. To semantics pedants and purists it may seem outrageous. If that’s you, read on at your peril! Here it is with lots of whitespace:
Why so much markup? Well, we want to individually style many of the glyphs. By nesting the elements, we can pick out the bits we need as descendant selectors. To retain a smidgen of semantics, the text is wrapped inLorem ipsum dolor ...
Web Directions Conference Pty Ltd
Here’s our CSS for this element .fn { background-image: url(images/topright.png); background-repeat: no-repeat; background-position: top right; padding-top: 2em; font-weight: bold; font-size: 1.1em; } Again, we don’t want it to repeat, but this time, we’ve specified a background position for the image. This will make the background image start from the top, but its right edge will be located at the right edge of the element. I also made the font size a little bigger, and the weight bold, to differentiate it from the rest of the text in the hCard. Here’s the image we are adding as the background to this element. So, putting these two CSS statements together we get We specified a padding-top of 2em to give some space between the content of the fn element and the edge of the fn element. Otherwise the top of the hCard image would be hard against the border. To see this in action, just remove the padding-top: 2em; declaration and preview in a browser. So, with just two statements, we are well under way. We’ve not even had to add any HTML so far. Let’s turn to the bottom of the element, and add the bottom border (well, the background image which will serve as that border). Now, which element are we going to use to add this background image to? OK, here I have to admit to a little, teensie bit of cheating. If you look at the HTML of the hCard, I’ve grouped the email and telephone properties into a div, with a class of telecommunications. This grouping is not strictly requred for our hCard.Phone/Fax: Work: 61 2 9365 5007
Email: info@webdirections.org
Email: info@webdirections.org
Typically, in hCard, the value part of this property isn’t required, and we could get away with info@webdirections.org The form I’ve used, with the span of class value is however, perfectly valid hCard markup (hard allows for multiple email addresses of different types, which is where this typically comes in handy). Why have I gone to all this trouble? Well, when it came to styling the hCard, I realized I needed a block element to attach the background image for the bottom right hand corner to. Typically the last block element in the containing element is the ideal choice (and sometimes it’s possible to take an inline element, for example the link here, and use CSS to make it a block element, and attach it to that, but that really doesn’t work with this design). So, if we are going to use the paragraph which contains the email link, we need a way to select it exclusively, which means that with CSS2 at least, we need a class or id as a hook for our CSS selector (in CSS3 we could use the last-child selector, which selects the last child element of a specified element, but again, as last child is not widely supported, we won’t rely on it here.) So, the least worst thing we could do is take an existing element, and add some reasonably meaningful markup to it. That’s why we gave the paragraph a class of email, and the email address a class of value. Which reminds me a little of a moment in Hamlet The lady doth protest too much, methinks OK, let’s get back to the CSS. We add the bottom right corner image, positioning it in the bottom right of the element, and making sure it doesn’t repeat. We also add some padding to the bottom, to balance out the padding we added to the top of the hCard. p.email { background-image: url(images/bottom-right.png); background-position: right bottom; background-repeat: no-repeat; padding-bottom: 2em; } Which all goes to make our hCard look like this It just remains for us to clean up a little. Let’s start from the top. We’ll float the download image to the right like this .vcard img { float: right; padding-right: 1em; margin-top: -1em } See how we didn’t have to add a class to style the image, we used the fact that the image is a descendent of the vcard element, and a descendent selector. In my experience, the very widely supported, powerful descendent selector is one of the most underused aspects of CSS. So if you don’t use it frequently, look into it in more detail. We added some space to the right of the image, and pulled it up a bit closer to the top of the hCard, like this We also want to add some whitespace between the edge of the hCard and the text. We would typically add padding to the left of the containing element, (in this case the vcard element) but this would break our bottom left hand corner, like this That’s because the div element we added this bottom left background image to would be moved in by the padding on its containing element. So instead, we add left margin to all the paragraphs in the hCard .vcard p { margin-left: 1em; } (there is the descendent selector again – it is the swiss army knife of CSS) Now, we’ve not yet made the width of the hCard a function of the size of the text inside it (or “em driven” as we described it earlier). We do this by giving the hCard a width that is specified in em units. Here we’ll set a width of say 28em, which makes the hCard always roughly as wide as 28 characters (strictly speaking 28 times the width of the letter capital M). So the statement for our containing vcard element becomes .vcard { background-image: url(images/vcardfill.png); background-repeat: no-repeat; color: #666; font-family: ""Lucida Grande"", Verdana, Helvetica, Arial, sans-serif; width: 28em; } and now our element will look like this We’ve used almost entirely the existing HTML from our original hCard (adding just a little, and trying as much as possible to keep that additional markup meaningful), and just 6 CSS statements. Holiday Bonus – a downloadable vCard Did you notice this part of the HTML What’s with the odd looking url body { font-size: 12px; } p { line-height 1.5em; } There are many ways to size text in CSS and the above approach provides and accessible method of achieving the pixel-precision solid typography requires. By way of explanation, the first font-size reduces the body text from the 16px default (common to most browsers and OS set-ups) down to the 12px we require. This rule is primarily there for Internet Explorer 6 and below on Windows: the percentage value means that the text will scale predictably should a user bump the text size up or down. The second font-size sets the text size specifically and is ignored by IE6, but used by Firefox, Safari, IE7, Opera and other modern browsers which allow users to resize text sized in pixels. Spacing between paragraphs With our rhythmic unit set at 18px we need to ensure that it is maintained throughout the body copy. A common place to lose the rhythm is the gaps set between margins. The default treatment by web browsers of paragraphs is to insert a top- and bottom-margin of 1em. In our case this would give a spacing between the paragraphs of 12px and hence throw the text out of rhythm. If the rhythm of the page is to be maintained, the spacing of paragraphs should be related to the basic line height unit. This is achieved simply by setting top- and bottom-margins equal to the line height. In order that typographic integrity is maintained when text is resized by the user we must use ems for all our vertical measurements, including line-height, padding and margins. p { font-size:1em; margin-top: 1.5em; margin-bottom: 1.5em; } Browsers set margins on all block-level elements (such as headings, lists and blockquotes) so a way of ensuring that typographic attention is paid to all such elements is to reset the margins at the beginning of your style sheet. You could use a rule such as: body,div,dl,dt,dd,ul,ol,li,h1,h2,h3,h4,h5,h6,pre,form,fieldset,p,blockquote,th,td { margin:0; padding:0; } Alternatively you could look into using the Yahoo! UI Reset style sheet which removes most default styling, so providing a solid foundation upon which you can explicitly declare your design intentions. Variations in text size When there is a change in text size, perhaps with a heading or sidenotes, the differing text should also take up a multiple of the basic leading. This means that, in our example, every diversion from the basic text size should take up multiples of 18px. This can be accomplished by adjusting the line-height and margin accordingly, as described following. Headings Subheadings in the example page are set to 14px. In order that the height of each line is 18px, the line-height should be set to 18 ÷ 14 = 1.286. Similarly the margins above and below the heading must be adjusted to fit. The temptation is to set heading margins to a simple 1em, but in order to maintain the rhythm, the top and bottom margins should be set at 1.286em so that the spacing is equal to the full 18px unit. h2 { font-size:1.1667em; line-height: 1.286em; margin-top: 1.286em; margin-bottom: 1.286em; } One can also set asymmetrical margins for headings, provided the margins combine to be multiples of the basic line height. In our example, a top margin of 1½ lines is combined with a bottom margin of half a line as follows: h2 { font-size:1.1667em; line-height: 1.286em; margin-top: 1.929em; margin-bottom: 0.643em; } Also in our example, the main heading is given a text size of 18px, therefore the line-height has been set to 1em, as has the margin: h1 { font-size:1.5em; line-height: 1em; margin-top: 0; margin-bottom: 1em; } Sidenotes Sidenotes (and other supplementary material) are often set at a smaller size to the basic text. To keep the rhythm, this smaller text should still line up with body copy, so a calculation similar to that for headings is required. In our example, the sidenotes are set at 10px and so their line-height must be increased to 18 ÷ 10 = 1.8. .sidenote { font-size:0.8333em; line-height:1.8em; } Borders One additional point where vertical rhythm is often lost is with the introduction of horizontal borders. These effectively act as shims pushing the subsequent text downwards, so a two pixel horizontal border will throw out the vertical rhythm by two pixels. A way around this is to specify horizontal lines using background images or, as in our example, specify the width of the border in ems and adjust the padding to take up the slack. The design of the footnote in our example requires a 1px horizontal border. The footnote contains 12px text, so 1px in ems is 1 ÷ 12 = 0.0833. I have added a margin of 1½ lines above the border (1.5 × 18 ÷ 12 = 2.5ems), so to maintain the rhythm the border + padding must equal a ½ (9px). We know the border is set to 1px, so the padding must be set to 8px. To specify this in ems we use the familiar calculation: 8 ÷ 12 = 0.667. Hit me with your rhythm stick Composing to a vertical rhythm helps engage and guide the reader down the page, but it takes typographic discipline to do so. It may seem like a lot of fiddly maths is involved (a few divisions and multiplications never hurt anyone) but good type setting is all about numbers, and it is this attention to detail which is the key to success.",2006,Richard Rutter,richardrutter,2006-12-12T00:00:00+00:00,https://24ways.org/2006/compose-to-a-vertical-rhythm/,design 146,Increase Your Font Stacks With Font Matrix,"Web pages built in plain old HTML and CSS are displayed using only the fonts installed on users’ computers (@font-face implementations excepted). To enable this, CSS provides the font-family property for specifying fonts in order of preference (often known as a font stack). For example: h1 {font-family: 'Egyptienne F', Cambria, Georgia, serif} So in the above rule, headings will be displayed in Egyptienne F. If Egyptienne F is not available then Cambria will be used, failing that Georgia or the final fallback default serif font. This everyday bit of CSS will be common knowledge among all 24 ways readers. It is also a commonly held belief that the only fonts we can rely on being installed on users’ computers are the core web fonts of Arial, Times New Roman, Verdana, Georgia and friends. But is that really true? If you look in the fonts folder of your computer, or even your Mum’s computer, then you are likely to find a whole load of fonts besides the core ones. This is because many software packages automatically install extra typefaces. For example, Office 2003 installs over 100 additional fonts. Admittedly not all of these fonts are particularly refined, and not all are suitable for the Web. However they still do increase your options. The Matrix I have put together a matrix of (western) fonts showing which are installed with Mac and Windows operating systems, which are installed with various versions of Microsoft Office, and which are installed with Adobe Creative Suite. The matrix is available for download as an Excel file and as a CSV. There are no readily available statistics regarding the penetration of Office or Creative Suite, but you can probably take an educated guess based on your knowledge of your readers. The idea of the matrix is that use can use it to help construct your font stack. First of all pick the font you’d really like for your text – this doesn’t have to be in the matrix. Then pick the generic family (serif, sans-serif, cursive, fantasy or monospace) and a font from each of the operating systems. Then pick any suitable fonts from the Office and Creative Suite lists. For example, you may decide your headings should be in the increasingly ubiquitous Clarendon. This is a serif type face. At OS-level the most similar is arguably Georgia. Adobe CS2 comes with Century Old Style which has a similar feel. Century Schoolbook is similar too, and is installed with all versions of Office. Based on this your font stack becomes: font-family: 'Clarendon Std', 'Century Old Style Std', 'Century Schoolbook', Georgia, serif Note the ‘Std’ suffix indicating a ‘standard’ OpenType file, which will normally be your best bet for more esoteric fonts. I’m not suggesting the process of choosing suitable fonts is an easy one. Firstly there are nearly two hundred fonts in the matrix, so learning what each font looks like is tricky and potentially time consuming (if you haven’t got all the fonts installed on a machine to hand you’ll be doing a lot of Googling for previews). And it’s not just as simple as choosing fonts that look similar or have related typographic backgrounds, they need to have similar metrics as well, This is especially true in terms of x-height which gives an indication of how big or small a font looks. Over to You The main point of all this is that there are potentially more fonts to consider than is generally accepted, so branch out a little (carefully and tastefully) and bring a little variety to sites out there. If you come up with any novel font stacks based on this approach, please do blog them (tagged as per the footer) and at some point they could all be combined in one place for everyone to consider. Appendix What about Linux? The only operating systems in the matrix are those from Microsoft and Apple. For completeness, Linux operating systems should be included too, although these are many and varied and very much in a minority, so I omitted them for time being. For the record, some Linux distributions come packaged with Microsoft’s core fonts. Others use the Vera family, and others use the Liberation family which comprises fonts metrically identical to Times New Roman and Arial. Sources The sources of font information for the matrix are as follows: Windows XP SP2 Windows Vista Office 2003 Office 2007 Mac OSX Tiger Mac OSX Leopard (scroll down two thirds) Office 2004 (Mac) by inspecting my Microsoft Office 2004/Office/Fonts folder Office 2008 (Mac) is expected to be as Office 2004 with the addition of the Vista ClearType fonts Creative Suite 2 (see pdf link in first comment) Creative Suite 3",2007,Richard Rutter,richardrutter,2007-12-17T00:00:00+00:00,https://24ways.org/2007/increase-your-font-stacks-with-font-matrix/,design 148,Typesetting Tables,"Tables have suffered in recent years on the web. They were used for laying out web pages. Then, following the Web Standards movement, they’ve been renamed by the populous as `data tables’ to ensure that we all know what they’re for. There have been some great tutorials for the designing tables using CSS for presentation and focussing on the semantics in the displaying of data in the correct way. However, typesetting tables is a subtle craft that has hardly had a mention. Table design can often end up being a technical exercise. What data do we need to display? Where is the data coming from and what form will it take? When was the last time your heard someone talk about lining numerals? Or designing to the reading direction? Tables are not read like sentences When a reader looks at, and tries to understand, tabular data, they’re doing a bunch of things at the same time. Generally, they’re task based; they’re looking for something. They are reading horizontally AND vertically Reading a table is not like reading a paragraph in a novel, and therefore shouldn’t be typeset in the same way. Designing tables is information design, it’s functional typography—it’s not a time for eye candy. Typesetting tables Typesetting great looking tables is largely an exercise in restraint. Minimal interference with the legibility of the table should be in the forefront of any designers mind. When I’m designing tables I apply some simple rules: Plenty of negative space Use the right typeface Go easy on the background tones, unless you’re giving reading direction visual emphasis Design to the reading direction By way of explanation, here are those rules as applied to the following badly typeset table. Your default table This table is a mess. There is no consideration for the person trying to read it. Everything is too tight. The typeface is wrong. It’s flat. A grim table indeed. Let’s see what we can do about that. Plenty of negative space The badly typeset table has been set with default padding. There has been little consideration for the ascenders and descenders in the type interfering with the many horizontal rules. The first thing we do is remove most of the lines, or rules. You don’t need them – the data in the rows forms its own visual rules. Now, with most of the rules removed, the ones that remain mean something; they are indicating some kind of hierarchy to the help the reader understand what the different table elements mean – in this case the column headings. Now we need to give the columns and rows more negative space. Note the framing of the column headings. I’m giving them more room at the bottom. This negative space is active—it’s empty for a reason. The extra air in here also gives more hierarchy to the column headings. Use the right typeface The default table is set in a serif typeface. This isn’t ideal for a couple of reasons. This serif typeface has a standard set of text numerals. These dip below the baseline and are designed for using figures within text, not on their own. What you need to use is a typeface with lining numerals. These align to the baseline and are more legible when used for tables. Sans serif typefaces generally have lining numerals. They are also arguably more legible when used in tables. Go easy on the background tones, unless you’re giving reading direction visual emphasis We’ve all seen background tones on tables. They have their use, but my feeling is that use should be functional and not decorative. If you have a table that is long, but only a few columns wide, then alternate row shading isn’t that useful for showing the different lines of data. It’s a common misconception that alternate row shading is to increase legibility on long tables. That’s not the case. Shaded rows are to aid horizontal reading across multiple table columns. On wide tables they are incredibly useful for helping the reader find what they want. Background tone can also be used to give emphasis to the reading direction. If we want to emphasis a column, that can be given a background tone. Hierarchy As I said earlier, people may be reading a table vertically, and horizontally in order to find what they want. Sometimes, especially if the table is complex, we need to give them a helping hand. Visually emphasising the hierarchy in tables can help the reader scan the data. Column headings are particularly important. Column headings are often what a reader will go to first, so we need to help them understand that the column headings are different to the stuff beneath them, and we also need to give them more visual importance. We can do this by making them bold, giving them ample negative space, or by including a thick rule above them. We can also give the row titles the same level of emphasis. In addition to background tones, you can give emphasis to reading direction by typesetting those elements in bold. You shouldn’t use italics—with sans serif typefaces the difference is too subtle. So, there you have it. A couple of simple guidelines to make your tables cleaner and more readable.",2007,Mark Boulton,markboulton,2007-12-07T00:00:00+00:00,https://24ways.org/2007/typesetting-tables/,design 149,Underpants Over My Trousers,"With Christmas approaching faster than a speeding bullet, this is the perfect time for you to think about that last minute present to buy for the web geek in your life. If you’re stuck for ideas for that special someone, forget about that svelte iPhone case carved from solid mahogany and head instead to your nearest comic-book shop and pick up a selection of comics or graphic novels. (I’ll be using some of my personal favourite comic books as examples throughout). Trust me, whether your nearest and dearest has been reading comics for a while or has never peered inside this four-colour world, they’ll thank-you for it. Aside from indulging their superhero fantasies, comic books can provide web designers with a rich vein of inspiring ideas and material to help them create shirt button popping, trouser bursting work for the web. I know from my own personal experience, that looking at aspects of comic book design, layout and conventions and thinking about the ways that they can inform web design has taken my design work in often-unexpected directions. There are far too many fascinating facets of comic book design that provide web designers with inspiration to cover in the time that it takes to pull your underpants over your trousers. So I’m going to concentrate on one muscle bound aspect of comic design, one that will make you think differently about how you lay out the content of your pages in panels. A suitcase full of Kryptonite Now, to the uninitiated onlooker, the panels of a comic book may appear to perform a similar function to still frames from a movie. But inside the pages of a comic, panels must work harder to help the reader understand the timing of a story. It is this method for conveying narrative timing to a reader that I believe can be highly useful to designers who work on the web as timing, drama and suspense are as important in the web world as they are in worlds occupied by costumed crime fighters and superheroes. I’d like you to start by closing your eyes and thinking about your own process for laying out panels of content on a page. OK, you’ll actually be better off with your eyes open if you’re going to carry on reading. I’ll bet you a suitcase full of Kryptonite that you often, if not always, structure your page layouts, and decide on the dimensions of those panels according to either: The base grid that you are working to The Golden Ratio or another mathematical schema More likely, I bet that you decide on the size and the number of your panels based on the amount of content that will be going into them. From today, I’d like you to think about taking a different approach. This approach not only addresses horizontal and vertical space, but also adds the dimension of time to your designs. Slowing down the action A comic book panel not only acts as a container for its content but also indicates to a reader how much time passes within the panel and as a result, how much time the reader should focus their attention on that one panel. Smaller panels create swift eye movement and shorter bursts of attention. Larger panels give the perception of more time elapsing in the story and subconsciously demands that a reader devotes more time to focus on it. Concrete by Paul Chadwick (Dark Horse Comics) This use of panel dimensions to control timing can also be useful for web designers in designing the reading/user experience. Imagine a page full of information about a product or service. You’ll naturally want the reader to focus for longer on the key benefits of your offering rather than perhaps its technical specifications. Now take a look at this spread of pages from Watchmen by Alan Moore and Dave Gibbons. Watchmen by Alan Moore and Dave Gibbons (Diamond Comic Distributors 2004) Throughout this series of (originally) twelve editions, artist Dave Gibbons stuck rigidly to his 3×3 panels per page design and deviated from it only for dramatic moments within the narrative. In particular during the last few pages of chapter eleven, Gibbons adds weight to the impending doom by slowing down the action by using larger panels and forces the reader to think longer about what was coming next. The action then speeds up through twelve smaller panels until the final panel: nothing more than white space and yet one of the most iconic and thought provoking in the entire twelve book series. Watchmen by Alan Moore and Dave Gibbons (Diamond Comic Distributors 2004) On the web it is common for clients to ask designers to fill every pixel of screen space with content, perhaps not understanding the drama that can be added by nothing more than white space. In the final chapter, Gibbons emphasises the carnage that has taken place (unseen between chapters eleven and twelve) by presenting the reader with six full pages containing only single, large panels. Watchmen by Alan Moore and Dave Gibbons (Diamond Comic Distributors 2004) This drama, created by the artist’s use of panel dimensions to control timing, is a technique that web designers can also usefully employ when emphasising important areas of content. Think back for a moment to the home page of Apple Inc., during the launch of their iconic iPhone, where the page contained nothing more than a large image and the phrase “Say hello to iPhone”. Rather than fill the page with sales messages, Apple’s designers allowed the space itself to tell the story and created a real sense of suspense and expectation among their readers. Borders Whereas on the web, panel borders are commonly used to add emphasis to particular areas of content, in comic books they take on a different and sometimes opposite role. In the examples so far, borders have contained all of the action. Removing a border can have the opposite effect to what you might at first think. Rather than taking emphasis away from their content, in comics, borderless panels allow the reader’s eyes to linger for longer on the content adding even stronger emphasis. Concrete by Paul Chadwick (Dark Horse Comics) This effect is amplified when the borderless content is allowed to bleed to the edges of a page. Because the content is no longer confined, except by the edges of the page (both comic and web) the reader’s eye is left to wander out into open space. Concrete by Paul Chadwick (Dark Horse Comics) This type of open, borderless content panel can be highly useful in placing emphasis on the most important content on a page in exactly the very opposite way that we commonly employ on the web today. So why is time an important dimension to think about when designing your web pages? On one level, we are often already concerned with the short attention spans of visitors to our pages and should work hard to allow them to quickly and easily find and read the content that both they and we think is important. Learning lessons from comic book timing can only help us improve that experience. On another: timing, suspense and drama are already everyday parts of the web browsing experience. Will a reader see what they expect when they click from one page to the next? Or are they in for a surprise? Most importantly, I believe that the web, like comics, is about story telling: often the story of the experiences that a customer will have when they use our product or service or interact with our organisation. It is this element of story telling than can be greatly improved by learning from comics. It is exactly this kind of learning and adapting from older, more established and at first glance unrelated media that you will find can make a real distinctive difference to the design work that you create. Fill your stockings If you’re a visual designer or developer and are not a regular reader of comics, from the moment that you pick up your first title, I know that you will find them inspiring. I will be writing more, and speaking about comic design applied to the web at several (to be announced) events this coming year. I hope you’ll be slipping your underpants over your trousers and joining me then. In the meantime, here is some further reading to pick up on your next visit to a comic book or regular bookshop and slip into your stockings: Comics and Sequential Art by Will Eisner (Northern Light Books 2001) Understanding Comics: The Invisible Art by Scott McCloud (Harper Collins 1994) Have a happy superhero season. (I would like to thank all of the talented artists, writers and publishers whose work I have used as examples in this article and the hundreds more who inspire me every day with their tall tales and talent.)",2007,Andy Clarke,andyclarke,2007-12-14T00:00:00+00:00,https://24ways.org/2007/underpants-over-my-trousers/,design 151,Get In Shape,"Pop quiz: what’s wrong with the following navigation? Maybe nothing. But then again, maybe there’s something bugging you about the way it comes together, something you can’t quite put your finger on. It seems well-designed, but it also seems a little… off. The design decisions that led to this eventual form were no doubt well-considered: Client: The top level needs to have a “current page” status indicator of some sort. Designer: How about a white tab? Client: Great! The second level needs to show up underneath the first level though… Designer: Okay, but that white tab I just added makes it hard to visually connect the bottom nav to the top. Client: Too late, we’ve seen the white tab and we love it. Try and make it work. Designer: Right. So I placed the second level in its own box. Client: Hmm. They seem too separated. I can’t tell that the yellow nav is the second level of the first. Designer: How about an indicator arrow? Client: Brilliant! The problem is that the end result feels awkward and forced. During the design process, little decisions were made that ultimately affect the overall shape of the navigation. What started out as a neatly contained rounded rectangle ended up as an ambiguous double shape that looks funny, though it’s often hard to pinpoint precisely why. The Shape of Things Well the why in this case is because seemingly unrelated elements in a design still end up visually interacting. Adding a new item to a page impacts everything surrounding it. In this navigation example, we’re looking at two individual objects that are close enough to each other that they form a relationship; if we reduce them to strictly their outlines, it’s a little easier to see that this particular combination registers oddly. The two shapes float with nothing really grounding them. If they were connected, perhaps it would be a different story. The white tab divides the top shape in half, leaving a gap in the middle of it. There’s very little balance in this pairing because the overall shape of the navigation wasn’t considered during the design process. Here’s another example: Gmail. Great email client, but did you ever closely look at what’s going on in that left hand navigation? The continuous blue bar around the message area spills out into the navigation. If we remove all text, we’re left with this odd configuration: Though the reasoning for anchoring the navigation highlight against the message area might be sound, the result is an irregular shape that doesn’t correspond with anything in reality. You may never consciously notice it, but once you do it’s hard to miss. One other example courtesy of last.fm: The two header areas are the same shade of pink so they appear to be closely connected. When reduced to their outlines it’s easy to see that this combination is off-balance: the edges don’t align, the sharp corners of the top shape aren’t consistent with the rounded corners of the bottom, and the part jutting out on the right of the bottom one seems fairly random. The result is a duo of oddly mis-matched shapes. Design Strategies Our minds tend to pick out familiar patterns. A clever designer can exploit this by creating references in his or her work to shapes and combinations with which viewers are already familiar. There are a few simple ideas that can be employed to help you achieve this: consistency, balance, and completion. Consistency A fairly simple way to unify the various disparate shapes on a page is by designing them with a certain amount of internal consistency. You don’t need to apply an identical size, colour, border, or corner treatment to every single shape; devolving a design into boring repetition isn’t what we’re after here. But it certainly doesn’t hurt to apply a set of common rules to most shapes within your work. Consider purevolume and its multiple rounded-corner panels. From the bottom of the site’s main navigation to the grey “Extras” panels halfway down the page (shown above), multiple shapes use a common border radius for unity. Different colours, different sizes, different content, but the consistent outlines create a strong sense of similarity. Not that every shape on the site follows this rule; they break the pattern right at the top with a darker sharp-cornered header, and again with the thumbnails below. But the design remains unified, nonetheless. Balance Arguably the biggest problem with the last.fm example earlier is one of balance. The area poking out of the bottom shape created a fairly obvious imbalance for no apparent reason. The right hand side is visually emphasized due to the greater area of pink coverage, but with the white gap left beside it, the emphasis seems unwarranted. It’s possible to create tension in your design by mismatching shapes and throwing off the balance, but when that happens unintentionally it can look like a mistake. Above are a few examples of design elements in balanced and unbalanced configurations. The examples in the top row are undeniably more pleasing to the eye than those in the bottom row. If these were fleshed out into full designs, those derived from the templates in the top row would naturally result in stronger work. Take a look at the header on 9Rules for a study in well-considered balance. On the left you’ll see a couple of paragraphs of text, on the right you have floating navigational items, and both flank the site’s logo. This unusual layout combines multiple design elements that look nothing alike, and places them together in a way that anchors each so that no one weighs down the header. Completion And finally we come to the idea of completion. Shapes don’t necessarily need hard outlines to be read visually as shapes, which can be exploited for various purposes. Notice how Zend’s mid-page “Business Topics” and “News” items (below) fade out to the right and bottom, but the placement of two of these side-by-side creates an impression of two panels rather than three disparate floating columns. By allowing the viewer’s eye to complete the shapes, they’ve lightened up the design of the page and removed inessential lines. In a busy design this technique could prove quite handy. Along the same lines, the individual shapes within your design may also be combined visually to form outlines of larger shapes. The differently-coloured header and main content/sidebar shapes on Veerle’s blog come together to form a single central panel, further emphasized by the slight drop shadow to the right. Implementation Studying how shape can be used effectively in design is simply a starting point. As with all things design-related, there are no hard and fast rules here; ultimately you may choose to bring these principles into your work more often, or break them for effect. But understanding how shapes interact within a page, and how that effect is ultimately perceived by viewers, is a key design principle you can use to impress your friends.",2007,Dave Shea,daveshea,2007-12-16T00:00:00+00:00,https://24ways.org/2007/get-in-shape/,design 152,CSS for Accessibility,"CSS is magical stuff. In the right hands, it can transform the plainest of (well-structured) documents into a visual feast. But it’s not all fur coat and nae knickers (as my granny used to say). Here are some simple ways you can use CSS to improve the usability and accessibility of your site. Even better, no sexy visuals will be harmed by the use of these techniques. Promise. Nae knickers This is less of an accessibility tip, and more of a reminder to check that you’ve got your body background colour specified. If you’re sitting there wondering why I’m mentioning this, because it’s a really basic thing, then you might be as surprised as I was to discover that from a sample of over 200 sites checked last year, 35% of UK local authority websites were missing their body background colour. Forgetting to specify your body background colour can lead to embarrassing gaps in coverage, which are not only unsightly, but can prevent your users reading the text on your site if they use a different operating system colour scheme. All it needs is the following line to be added to your CSS file: body {background-color: #fff;} If you pair it with color: #000; … you’ll be assured of maintaining contrast for any areas you inadvertently forget to specify, no matter what colour scheme your user needs or prefers. Even better, if you’ve got standard reset CSS you use, make sure that default colours for background and text are specified in it, so you’ll never be caught with your pants down. At the very least, you’ll have a white background and black text that’ll prompt you to change them to your chosen colours. Elbow room Paying attention to your typography is important, but it’s not just about making it look nice. Careful use of the line-height property can make your text more readable, which helps everyone, but is particularly helpful for those with dyslexia, who use screen magnification or simply find it uncomfortable to read lots of text online. When lines of text are too close together, it can cause the eye to skip down lines when reading, making it difficult to keep track of what you’re reading across. So, a bit of room is good. That said, when lines of text are too far apart, it can be just as bad, because the eye has to jump to find the next line. That not only breaks up the reading rhythm, but can make it much more difficult for those using Screen Magnification (especially at high levels of magnification) to find the beginning of the next line which follows on from the end of the line they’ve just read. Using a line height of between 1.2 and 1.6 times normal can improve readability, and using unit-less line heights help take care of any pesky browser calculation problems. For example: p { font-family: ""Lucida Grande"", Lucida, Verdana, Helvetica, sans-serif; font-size: 1em; line-height: 1.3; } or if you want to use the shorthand version: p { font: 1em/1.3 ""Lucida Grande"", Lucida, Verdana, Helvetica, sans-serif; } View some examples of different line-heights, based on default text size of 100%/1em. Further reading on Unitless line-heights from Eric Meyer. Transformers: Initial case in disguise Nobody wants to shout at their users, but there are some occasions when you might legitimately want to use uppercase on your site. Avoid screen-reader pronunciation weirdness (where, for example, CONTACT US would be read out as Contact U S, which is not the same thing – unless you really are offering your users the chance to contact the United States) caused by using uppercase by using title case for your text and using the often neglected text-transform property to fake uppercase. For example: .uppercase { text-transform: uppercase } Don’t overdo it though, as uppercase text is harder to read than normal text, not to mention the whole SHOUTING thing. Linky love When it comes to accessibility, keyboard only users (which includes those who use voice recognition software) who can see just fine are often forgotten about in favour of screen reader users. This Christmas, share the accessibility love and light up those links so all of your users can easily find their way around your site. The link outline AKA: the focus ring, or that dotted box that goes around links to show users where they are on the site. The techniques below are intended to supplement this, not take the place of it. You may think it’s ugly and want to get rid of it, especially since you’re going to the effort of tarting up your links. Don’t. Just don’t. The non-underlined underline If you listen to Jacob Nielsen, every link on your site should be underlined so users know it’s a link. You might disagree with him on this (I know I do), but if you are choosing to go with underlined links, in whatever state, then remove the default underline and replacing it with a border that’s a couple of pixels away from the text. The underline is still there, but it’s no longer cutting off the bottom of letters with descenders (e.g., g and y) which makes it easier to read. This is illustrated in Examples 1 and 2. You can modify the three lines of code below to suit your own colour and border style preferences, and add it to whichever link state you like. text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; Standing out from the crowd Whatever way you choose to do it, you should be making sure your links stand out from the crowd of normal text which surrounds them when in their default state, and especially in their hover or focus states. A good way of doing this is to reverse the colours when on hover or focus. Well-focused Everyone knows that you can use the :hover pseudo class to change the look of a link when you mouse over it, but, somewhat ironically, people who can see and use a mouse are the group who least need this extra visual clue, since the cursor handily (sorry) changes from an arrow to a hand. So spare a thought for the non-pointing device users that visit your site and take the time to duplicate that hover look by using the :focus pseudo class. Of course, the internets being what they are, it’s not quite that simple, and predictably, Internet Explorer is the culprit once more with it’s frustrating lack of support for :focus. Instead it applies the :active pseudo class whenever an anchor has focus. What this means in practice is that if you want to make your links change on focus as well as on hover, you need to specify focus, hover and active. Even better, since the look and feel necessarily has to be the same for the last three states, you can combine them into one rule. So if you wanted to do a simple reverse of colours for a link, and put it together with the non-underline underlines from before, the code might look like this: a:link { background: #fff; color: #000; font-weight: bold; text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; } a:visited { background: #fff; color: #800080; font-weight: bold; text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; } a:focus, a:hover, a:active { background: #000; color: #fff; font-weight: bold; text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; } Example 3 shows what this looks like in practice. Location, Location, Location To take this example to it’s natural conclusion, you can add an id of current (or something similar) in appropriate places in your navigation, specify a full set of link styles for current, and have a navigation which, at a glance, lets users know which page or section they’re currently in. Example navigation using location indicators. and the source code Conclusion All the examples here are intended to illustrate the concepts, and should not be taken as the absolute best way to format links or style navigation bars – that’s up to you and whatever visual design you’re using at the time. They’re also not the only things you should be doing to make your site accessible. Above all, remember that accessibility is for life, not just for Christmas.",2007,Ann McMeekin,annmcmeekin,2007-12-13T00:00:00+00:00,https://24ways.org/2007/css-for-accessibility/,design 167,Back To The Future of Print,"By now we have weathered the storm that was the early days of web development, a dangerous time when we used tables, inline CSS and separate pages for print only versions. We can reflect in a haggard old sea-dog manner (“yarrr… I remember back in the browser wars…”) on the bad practices of the time. We no longer need convincing that print stylesheets are the way to go1, though some of the documentation for them is a little outdated now. I am going to briefly cover 8 tips and 4 main gotchas when creating print stylesheets in our more enlightened era. Getting started As with regular stylesheets, print CSS can be included in a number of ways2, for our purposes we are going to be using the link element. This is still my favourite way of linking to CSS files, its easy to see what files are being included and to what media they are being applied to. Without the media attribute specified the link element defaults to the media type ‘all’ which means that the styles within then apply to print and screen alike. The media type ‘screen’ only applies to the screen and wont be picked up by print, this is the best way of hiding styles from print. Make sure you include your print styles after all your other CSS, because you will need to override certain rules and this is a lot easier if you are flowing with the cascade than against it! Another thing you should be thinking is ‘does it need to be printed’. Consider the context3, if it is not a page that is likely to be printed, such as a landing page or a section index then the print styles should resemble the way the page looks on the screen. Context is really important for the design of your print stylesheet, all the tips and tricks that follow should be taken in the context of the page. If for example you are designing a print stylesheet for an item in a shopping cart, it is irrelevant for the user to know the exact url of the link that takes them to your checkout. Tips and tricks During these tip’s we are going to build up print styles for a textileRef:11112857385470b854b8411:linkStartMarker:“simple example”:/examples/back-to-the-future-of-print/demo-1.html 1. Remove the cruft First things first, navigation, headers and most page furniture are pretty much useless and dead space in print so they will need to be removed, using display:none;. 2. Linearise your content Content doesn’t work so well in columns in print, especially if the content columns are long and intend to stretch over multiple columns (as mentioned in the gotcha section below). You might want to consider Lineariseing the content to flow down the page. If you have your source order in correct priority this will make things a lot easier4. 3. Improve your type Once you have removed all the useless cruft and jiggled things about a bit, you can concentrate more on the typography of the page. Typography is a complex topic5, but simply put serif-ed fonts such as Georgia work better on print and sans serif-ed fonts such as Verdana are more appropriate for screen use. You will probably want to increase font size and line height and change from px to pt (which is specifically a print measurement). 4. Go wild on links There are some incredibly fun things you can do with links in print using CSS. There are two schools of thought, one that consider it is best to disguise inline links as body text because they are not click-able on paper. Personally I believe it is useful to know for reference that the document did link to somewhere originally. When deciding which approach to take, consider the context of your document, do people need to know where they would have gone to? will it help or hinder them to know this information? Also for an alternative to the below, take a look at Aaron Gustafson’s article on generating footnotes for print6. Using some clever selector trickery and CSS generated content you can have the location of the link generated after the link itself. HTML:I wish Google could find my keys
CSS: a:link:after, a:visited:after, a:hover:after, a:active:after { content: "" <"" attr(href) ""> ""; } But this is not perfect, in the above example the content of the href is just naively plonked after the link text: I wish Google