rowid,title,contents,year,author,author_slug,published,url,topic 222,Golden Spirals,"As building blocks go, the rectangle is not one to overwhelm the designer with decisions. On the face of it, you have two options: you can set the width, and the height. But despite this apparent simplicity, there are combinations of width and height that can look unbalanced. If a rectangle is too tall and slim, it might appear precarious. If it is not tall enough, it may simply look flat. But like a guitar string that’s out of tune, you can tweak the proportions little by little until a rectangle feels, as Goldilocks said, just right. A golden rectangle has its height and width in the golden ratio, which is approximately 1:1.618. These proportions have long been recognised as being aesthetically harmonious. Whether through instruction or by intuition, artists have understood how to exploit these proportions over the centuries. Examples can be found in classical architecture, medieval book construction, and even in the recent #newtwitter redesign. A mathematical curiosity The golden rectangle is unique, in that if you remove a square section from it, what is left behind is itself a golden rectangle. The removal of a square can be repeated on the rectangle that is left behind, and then repeated again, as many times as you like. This means that the golden rectangle can be treated as a building block for recursive patterns. In this article, we will exploit this property to build a golden spiral, using only HTML and CSS. The markup The HTML we’ll use for this study is simply a series of nested
s.
The first of these has the class cycle, and so does every fourth ancestor thereafter. The spiral completes a cycle every four steps, so this class allows styles to be reused on
s that appear at the same position in each cycle. Golden proportions To create our spiral we are going to exploit the unique properties of the golden rectangle, so our first priority is to ensure that we have a golden rectangle to begin with. If we pick a length for the short edge – say, 288 pixels – we can then calculate the length of the long edge by multiplying this value by 1.618. In this case, 288 × 1.618 = 466, so our starting point will be a
with these properties: #container > div { width: 466px; height: 288px; } The greater than symbol is used here to single out the immediate child of the #container element, without affecting the grandchild or any of the more distant descendants. We could go on to specify the precise pixel dimensions of every child element, but that means doing a lot of sums. It would be much easier if we just specified the dimensions for each element as a percentage of the width and height of its parent. This also has the advantage that if you change the size of the outermost container, all nested elements would be resized automatically – something that we shall exploit later. The approximate value of 38.2% can be derived from (100 × 1 − phi) ÷ phi, where the Greek letter phi (ϕ) stands for the golden ratio. The value of phi can be expressed as phi = (1 + √5 ) ÷ 2, which is approximately 1.618. You don’t have to understand the derivation to use it. Just remember that if you start with a golden rectangle, you can slice 38.2% from it to create a new golden rectangle. This can be expressed in CSS quite simply: .cycle, .cycle > div > div { height: 38.2%; width: 100%; } .cycle > div, .cycle > div > div > div { width: 38.2%; height: 100%; } You can see the result so far by visiting Demo One. With no borders or shading, there is nothing to see yet, so let’s address that next. Shading with transparency We’ll need to apply some shading to distinguish each segment of the spiral from its neighbours. We could start with a white background, then progress through shades of grey: #eee, #ddd, #ccc and so on, but this means hard-coding the background-color for every element. A more elegant solution would be to use the same colour for every element, but to make each one slightly transparent. The nested
s that we are working with could be compared to layers in Photoshop. By applying a semi-transparent shade of grey, each successive layer can build on top of the darker layers beneath it. The effect accumulates, causing each successive layer to appear slightly darker than the last. In his 2009 article for 24 ways, Drew McLellan showed how to create a semi-transparent effect by working with RGBA colour. Here, we’ll use the colour black with an alpha value of 0.07. #container div { background-color: rgba(0,0,0,0.07) } Note that I haven’t used the immediate child selector here, which means that this rule will apply to all
elements inside the #container, no matter how deeply nested they are. You can view the result in Demo Two. As you can see, the golden rectangles alternate between landscape and portrait orientation. Demo Three). CSS3 specification indicates that a percentage can be used to set the border-radius property, but using percentages does not achieve consistent results in browsers today. Luckily, if you specify a border-radius in pixels using a value that is greater than the width and height of the element, then the resulting curve will use the shorter length side as its radius. This produces exactly the effect that we want, so we’ll use an arbitrarily high value of 10,000 pixels for each border-radius: .cycle { border-radius: 0px; border-bottom-left-radius: 10000px; } .cycle > div { border-radius: 0px; border-bottom-right-radius: 10000px; } .cycle > div > div { border-radius: 0px; border-top-right-radius: 10000px; } .cycle > div > div > div { border-radius: 0px; border-top-left-radius: 10000px; } Note that the specification for the border-radius property is still in flux, so it is advisable to use vendor-specific prefixes. I have omitted them from the example above for the sake of clarity, but if you view source on Demo Four then you’ll see that the actual styles are not quite as brief. Filling the available space We have created an approximation of the Golden Spiral using only HTML and CSS. Neat! It’s a shame that it occupies just a fraction of the available space. As a finishing touch, let’s make the golden spiral expand or contract to use the full space available to it. Ideally, the outermost container should use the full available width or height that could accomodate a rectangle of golden proportions. This behaviour is available for background images using the “ background-size: contain; property, but I know of no way to make block level HTML elements behave in this fashion (if I’m missing something, please enlighten me). Where CSS fails to deliver, JavaScript can usually provide a workaround. This snippet requires jQuery: $(document).ready(function() { var phi = (1 + Math.sqrt(5))/2; $(window).resize(function() { var goldenWidth = windowWidth = $(this).width(), goldenHeight = windowHeight = $(this).height(); if (windowWidth/windowHeight > phi) { // panoramic viewport – use full height goldenWidth = windowHeight * phi; } else { // portrait viewport – use full width goldenHeight = windowWidth / phi; }; $(""#container > div.cycle"") .width(goldenWidth) .height(goldenHeight); }).resize(); }); You can view the result by visiting Demo Five. Is it just me, or can you see an elephant in there? You can probably think of many ways to enhance this further, but for this study we’ll leave it there. It has been a good excuse to play with proportions, positioning and the immediate child selector, as well as new CSS3 features such as border-radius and RGBA colours. If you are not already designing with golden proportions, then perhaps this will inspire you to begin.",2010,Drew Neil,drewneil,2010-12-07T00:00:00+00:00,https://24ways.org/2010/golden-spirals/,design 217,Beyond Web Mechanics – Creating Meaningful Web Design,"It was just over three years ago when I embarked on becoming a web designer, and the first opinion piece about the state of web design I came across was a conference talk by Elliot Jay Stocks called ‘Destroy the Web 2.0 Look’. Elliot’s presentation was a call to arms, a plea to web designers the world over to stop the endless reproductions of the so called ‘Web 2.0 look’. Three and a half years on from Elliot’s talk, what has changed? Well, from an aesthetic standpoint, not a whole lot. The Web 2.0 look has evolved, but it’s still with us and much of the web remains filled with cookie cutter websites that bear a striking resemblance to one another. This wouldn’t matter so much if these websites were selling comparable services or products, but they’re not. They look similar, they follow the same web design trends; their aesthetic style sends out a very similar message, yet they’re selling completely different services or products. How can you be communicating effectively with your users when your online book store is visually indistinguishable from an online cosmetic store? This just doesn’t make sense. I don’t want to belittle the current version of the Web 2.0 look for the sake of it. I want to talk about the opportunity we have as web designers to create more meaningful experiences for the people using our websites. Using design wisely gives us the ability to communicate messages, ideas and attitudes that our users will understand and connect with. Being human As human beings we respond emotionally to everything around us – people, objects, posters, packaging or websites. We also respond in different ways to different kinds of aesthetic design and style. We care about style and aesthetics deeply, whether we realise it or not. Aesthetic design has the power to attract or repel. We often make decisions based purely on aesthetics and style – and don’t retailers the world over know it! We connect attitudes and strongly held beliefs to style. Individuals will proudly associate themselves with a certain style or aesthetic because it’s an expression of who they are. You know that old phrase, ‘Don’t judge a book by its cover’? Well, the problem is that people do, so it’s important we get the cover right. Much is made of how to structure web pages, how to create a logical information hierarchy, how to use layout and typography to clearly communicate with your users. It’s important, however, not to mistake clarity of information or legibility with getting your message across. Few users actually read websites word by word: it’s far more likely they’ll just scan the page. If the page is copy-heavy and nothing grabs their attention, they may well just move on. This is why it’s so important to create a visual experience that actually means something to the user. Meaningful design When we view a poster or website, we make split-second assessments and judgements of what is in front of us. Our first impressions of what a website does or who it is aimed at are provoked by the style and aesthetic of the website. For example, with clever use of colour, typography, graphic design and imagery we can communicate to users that an organisation is friendly, edgy, compassionate, fun or environmentally conscious. Using a certain aesthetic we can convey the personality of that organisation, target age ranges, different sexes or cultural groups, communicate brand attributes, and more. We can make our users feel like they’re part of something and, perhaps even more importantly, we can make new users want to be a part of something. And we can achieve all this before the user has read a single word. By establishing a website’s aesthetic and creating a meaningful visual language, a design is no longer just a random collection of pretty gradients that have been plucked out of thin air. There can be a logic behind the design decisions we make. So, before you slap another generic piece of ribbon or an ultra shiny icon into the top-left corner of your website, think about why you are doing it. If you can’t come up with a reason better than “I saw it on another website”, it’s probably a poor application of style. Design and style There are a number of reasons why the web suffers from a lack meaningful design. Firstly, there are too many preconceptions of what a website should look like. It’s too easy for designers to borrow styles from other websites, thereby limiting the range of website designs we see on the web. Secondly, many web designers think of aesthetic design as of secondary importance, which shouldn’t be the case. Designing websites that are accessible and easy to use is, of course, very important but this is the very least a web designer should be delivering. Easy to use websites should come as standard – it’s equally important to create meaningful, compelling and beautiful experiences for everyone who uses our websites. The aesthetics of your site are part of the design, and to ignore this and play down the role of aesthetic design is just a wasted opportunity. No compromise necessary Easy to use, accessible websites and beautiful, meaningful aesthetics are not mutually exclusive. The key is to apply style and aesthetic design appropriately. We need to think about who and what we’re designing for and ask ourselves why we’re applying a certain kind of aesthetic style to our design. If you do this, there’s no reason why effective, functional design should come at the expense of jaw-dropping, meaningful aesthetics. Web designers need to understand the differences between functional design and aesthetic design but, even more importantly, they need to know how to make them work together. It’s combining these elements of design successfully that makes for the best web design in the world.",2010,Mike Kus,mikekus,2010-12-05T00:00:00+00:00,https://24ways.org/2010/beyond-web-mechanics-creating-meaningful-web-design/,design 210,Stop Leaving Animation to the Last Minute,"Our design process relies heavily on static mockups as deliverables and this makes it harder than it needs to be to incorporate UI animation in our designs. Talking through animation ideas and dancing out the details of those ideas can be fun; but it’s not always enough to really evaluate or invest in animated design solutions. By including deliverables that encourage discussing animation throughout your design process, you can set yourself (and your team) up for creating meaningful UI animations that feel just as much a part of the design as your colour palette and typeface. You can get out of that “running out of time to add in the animation” trap by deliberately including animation in the early phases of your design process. This will give you both the space to treat animation as a design tool, and the room to iterate on UI animation ideas to come up with higher quality solutions. Two deliverables that can be especially useful for this are motion comps and animated interactive prototypes. Motion comps - an animation deliverable Motion comps (also called animatics or motion mock-ups) are usually video representation of UI animations. They are used to explore the details of how a particular animation might play out. And they’re most often made with timeline-based tools like Adobe After Effects, Adobe Animate, or Tumult Hype. The most useful things about motion comps is how they allow designers and developers to share the work of creating animations. (Instead of pushing all the responsibility of animation on one group or the other.) For example, imagine you’re working on a design that has a content panel that can either be open or closed. You might create a mockup like the one below including the two different views: the closed state and the open state. If you’re working with only static deliverables, these two artboards might be exactly what you handoff to developers along with the instruction to animate between the two. On the surface that seems pretty straight forward, but even with this relatively simple transition there’s a lot that those two artboards don’t address. There are seven things that change between the closed state and the open state. That’s seven things the developer building this out has to figure out how to move in and out of view, when, and in what order. And all of that is even before starting to write the code to make it work. By providing only static comps, all the logic of the animation falls on the developer. This might go ok if she has the bandwidth and animation knowledge, but that’s making an awful lot of assumptions. Instead, if you included a motion mock up like this with your static mock ups, you could share the work of figuring out the logic of the animation between design and development. Designers could work out the logic of the animation in the motion comp, exploring which items move at which times and in which order to create the opening and closing transitions. The motion comp can also be used to iterate on different possible animation approaches before any production code has to be committed too. Sharing the work and giving yourself time to explore animation ideas before you’re backed up again the deadline will lead to happier teammates and better design solutions. When to use motion comps I’m not a fan of making more deliverables just for the sake of having more things to make, so I find it helps to narrow down what question I’m trying answer before choosing which sort of deliverable to make to investigate. Motion comps can be most helpful for answering questions like: Exactly how should this animation look? Which items should move? Where? And when? Do the animation qualities reflect our brand or our voice and tone? One of the added bonuses of creating motion comps to answer these questions is that you’ll have a concrete thing to bring to design critiques or reviews to get others’ input on them as well. Using motion comps as handoff Motion comps are often used to handoff animation ideas from design to development. They can be super useful for this, but they’re even more useful when you include the details of the motion specs with them. (It’s difficult, if not impossible, to glean these details from playing back a video.) More specifically, you’ll want to include: Durations and the properties animated for each animation Easing curve values or spring values used Delay values and repeat counts In many cases you’ll have to collect these details up manually. But this isn’t necessarily something that that will take a lot of time. If you take note of them as you’re creating the motion comp, chances are most of these details will already be top of mind. (Also, if you use After Effects for your motion comps, the Inspector Spacetime plugin might be helpful for this task.) Animated prototypes - an interactive deliverable Making prototypes isn’t a new idea for web work by any stretch, but creating prototypes that include animation – or even creating prototypes specifically to investigate potential animation solutions – can go a long way towards having higher quality animations in your final product. Interactive prototypes are web or app-based, or displayed in a particular tool’s preview window to create a useable version of interactions that might end up in the end product. They’re often made with prototyping apps like Principle, Framer, or coded up in HTML, CSS and JS directly like the example below. See the Pen Prototype example by Val Head (@valhead) on CodePen. The biggest different between motion comps and animated prototypes is the interactivity. Prototypes can reposed to taps, drags or gestures, while motion comps can only play back in a linear fashion. Generally speaking, this makes prototypes a bit more of an effort to create, but they can also help you solve different problems. The interactive nature of prototypes can also make them useful for user testing to further evaluate potential solutions. When to use prototypes When it comes to testing out animation ideas, animated prototypes can be especially helpful in answering questions like these: How will this interaction feel to use? (Interactive animations often have different timing needs than animations that are passively viewed.) What will the animation be like with real data or real content? Does this animation fit the context of the task at hand? Prototypes can be used to investigate the same questions that motion comps do if you’re comfortable working in code or your prototyping tool of choice has capabilities to address high fidelity animation details. There are so many different prototyping tools out there at the moment, you’re sure to be able to find one that fits your needs. As a quick side note: If you’re worried that your coding skills might not be up to par to prototype in code, know that prototype code doesn’t have to be production quality code. Animated prototypes’ main concern is working out the animation details. Once you’ve arrived at a combination of animations that works, the animation specifics can be extracted or the prototype can be refactored for production. Motion comp or prototype? Both motion comps and prototypes can be extremely useful in the design process and you can use whichever one (or ones) that best fits your team’s style. The key thing that both offer is a way to make animation ideas visible and sharable. When you and your teammate are both looking at the same deliverable, you can be confident you’re talking about the same thing and discuss its pros and cons more easily than just describing the idea verbally. Motion comps tend to be more useful earlier in the design process when you want to focus on the motion without worrying about the underlying structure or code yet. Motion comps also be great when you want to try something completely new. Some folks prefer motion comps because the tools for making them feel more familiar to them which means they can work faster. Prototypes are most useful for animations that rely heavily on interaction. (Getting the timing right for interactions can be tough without the interaction part sometimes.) Prototypes can also be helpful to investigate and optimize performance if that’s a specific concern. Give them a try Whichever deliverables you choose to highlight your animation decisions, including them in your design reviews, critiques, or other design discussions will help you make better UI animation choices. More discussion around UI animation ideas during the design phase means greater buy-in, more room for iteration, and higher quality UI animations in your designs. Why not give them a try for your next project?",2017,Val Head,valhead,2017-12-08T00:00:00+00:00,https://24ways.org/2017/stop-leaving-animation-to-the-last-minute/,design 183,Designing For The Switch,"For a long time on the web, we’ve been typographically spoilt. Yes, you heard me correctly. Think about it: our computers come with web fonts already installed; fonts that have been designed specifically to work well online and at small size; and fonts that we can be sure other people have too. Yes, we’ve been spoilt. We don’t need to think about using Verdana, Arial, Georgia or Cambria. Yet, for a long time now, designers have felt we needed more. We want to choose whatever typeface we feel necessary for our designs. We did bad things along the way in pursuit of this goal such as images for text. Smart people dreamt up tools to help us such as sIFR, or Cufón. Only fairly recently, @font-face is supported in most browsers. The floodgates are opening. It really is the dawn of a new typographic era on the web. And we must tread carefully. The New Typesetters Many years ago, before the advent of desktop publishing, if you wanted words set in a particular typeface, you had to go to a Typesetter. A Typesetter, or Compositor, as they were sometimes called, was a person whose job it was to take the written word (in the form of a document or manuscript) and ‘set’ the type in the desired typeface. The designer would chose what typeface they wanted – and all the ligatures, underlines, italics and whatnot – and then scribble all over the manuscript so the typesetter could set the correct type. Then along came Desktop Publishing and every Tom, Dick and Harry could choose type on their computer and an entire link in the typographic chain was removed within just a few years. Well, that’s progress I guess. That was until six months ago when Typesetting was reborn on the web in the guise of a font service: Typekit. Typekit – and services like Typekit such as Typotheque, Kernest and the upcoming Fontdeck – are typesetting services for the web. You supply them with your content, in the form of a webpage, and they provide you with some JavaScript to render that webpage in the typeface you’ve specified simply by adding the font name in your CSS file. Thanks to services like these, font foundries are now talking to create licensing structures to allow us to embed fonts into our web pages legally – which has always been a sticking point in the past. So, finally, us designers can get what we want: whatever typeface we want on the web. Yes, but… there are hurdles. One of which is the subject of this article. The differences between Web Fonts and other fonts Web fonts are different to normal fonts. They differ in a whole bunch of ways, from loose letter spacing to larger x-heights. But perhaps the most notable practical difference is file size. Let’s take a look at one of Typekit’s latest additions from the FontFont library, Meta. Meta Roman weighs in at 42 KB. This is a fairly typical file size for a single weight of a good font. Now, let’s have a look at Verdana. Verdana is 186 KB. For one weight. The four weight family for Verdana weighs in at 686 KB. Four weights for half a megabyte!? Why so huge? Well, Verdana has a lot of information packed into its 186 KB. It has the largest hinting data table of any typeface (the information carried by a font that tells it how to align itself to the pixels on your screen). As it has been shipped with Microsoft products since 1996, it has had time to grow to support many, many languages. Along with its cousin, Georgia (283 KB), Verdana was a new breed of typeface. And it’s grown fat. If really serious web typography takes off – and by that I mean typefaces specifically designed for the screen – then we’re going to see more fonts increase in file size as the font files include more data. So, if you’re embedding a font weighing in at 100 KB, what happens? The Flash of Unstyled Text We all remember the Flash of Unstyled Content bug on Internet Explorer, right? That annoying bug that caused a momentary flash of unstyled HTML page. Well, the same thing can happen with embedding fonts using @font-face. An effect called The Flash of Unstyled Text (FOUT), first coined by Paul Irish. Personally, I prefer to call it the Flash of UnTypeset Text (still FOUT), as the text is styled, just not with what you want. If you embed a typeface in your CSS, then the browser will download that typeface. Typically, browsers differ in the way they handle this procedure. Firefox and Opera will render the text using the next font in your font stack until the first (embedded) font is loaded. It will then switch to the embedded font. Webkit takes the approach that you asked for that font so it will wait until it’s completely loaded before showing it you. In Opera and Firefox, you get a FOUT. In Webkit, you don’t. You wait. Hang on there. Didn’t I say that good web fonts weigh in considerably more than ‘normal’ fonts? And whilst the browser is downloading the font, the user gets what to look at? Some pictures, background colours and whatever else isn’t HTML? I believe Webkit’s handling of font embedding – as deliberate as it is – is damaging to the practice of font embedding. Why? Well, we can design to a switch in typeface (as jarring as that is for the user), but we can’t design to blank space. Let’s have a closer look at how we can design to FOUT. More considered font stacks We all know that font stacks in CSS are there for when a user doesn’t have a font; the browser will jump to the next one in the stack. Adding embedded fonts into the font stack means that because of FOUT (in gecko and Opera), the user can see a switch, and depending on their connection that switch could happen well into any reading that the user may be doing. The practicalities of this are that a user could be reading and be towards the end of a line when the paragraph they are reading changes shape. The word they were digesting suddenly changes to three lines down. It’s the online equivalent of someone turning the page for you when you least expect it. So, how can we think about our font stacks slightly differently so we can minimise the switch? Two years ago, Richard Rutter wrote on this very site about increasing our font stacks. By increasing the font stacks (by using his handy matrix) we can begin to experiment with different typefaces. However, when we embed a typeface, we must look very carefully at the typefaces in the font stack and the relationship between them. Because, previously, the user would not see a switch from one typeface to another, they’d just get either one or the other. Not both. With FOUT, the user sees two typefaces. By carefully looking at the characteristics of the typefaces you choose, you can minimise the typographic ‘distance’ between the type down the stack. In doing so, you minimise the jarring effect of the switch. Let’s take a look at an example of how to go about this. Micro Typography to build better font stacks Let’s say I want to use a recent edition to Typekit – Meta Serif Book – as my embedded font. My font stack would start like this: font-family: 'Meta Serif Bold'; Where do you go from here? Well, first, familiarise yourself with Richard’s Font Matrix so you get an idea of what fonts are available for different people. Then start by looking closely at the characters of the embedded font and then compare them to different fonts from the matrix. When I do this, I’m looking to match type characteristics such as x-height, contrast (the thickness and thinness of strokes), the stress (the angle of contrast) and the shape of the serifs (if the typeface has any). Using just these simple comparative metrics means you can get to a ‘best fit’ reasonably quickly. And remember, you’re not after an ideal match. You’re after a match that means the switch is less painful for the reader, but also a typeface that carries similar characteristics so your design doesn’t change too much. Building upon my choice of embedded font, I can quickly build up a stack by comparing letters. This then creates my ‘best fit’ stack. This translates to the CSS as: font-family: 'Meta Serif Bold', 'Lucida Bright', Cambria, Georgia, serif Following this process, and ending up with considered font stacks, means that we can design to the Flash of UnTypeset Content and ensure that our readers don’t get a diminished experience.",2009,Mark Boulton,markboulton,2009-12-16T00:00:00+00:00,https://24ways.org/2009/designing-for-the-switch/,design 174,Type-Inspired Interfaces,"One of the things that terrifies me most about a new project is the starting point. How is the content laid out? What colors do I pick? Once things like that are decided, it becomes significantly easier to continue design, but it’s the blank page where I spend the most time. To that end, I often start by choosing type. I don’t need to worry about colors or layout or anything else… just the right typefaces that support the art direction. (This article won’t focus on how to choose a typeface, but there are some really great resources if you interested in that sort of thing.) And just like that, all your work is done. “Hold it just a second,” you might say. “All I’ve done is pick type. I still have to do the rest!” To which I would reply, “Silly rabbit. You already have!” You see, picking the right typeface gets you farther than you might think. Here are a few tips on taking cues from type to design interfaces and interface elements. Perfecting Web 2.0 If you’re going for that beloved rounded corner look, you might class it up a bit by choosing the wonderful Omnes Pro by Joshua Darden. As the typeface already has a rounded aesthetic, making buttons that fit the style should be pretty easy. I’ve found that using multiples helps to keep your interfaces looking balanced and proportional. Noticing that the top left edge of the letter “P” has about an 12px corner radius, let’s choose a 24px radius for our button (a multiple of 2), so that we get proper rounded corners. By taking mathematical measurements from the typeface, our button looks more thought out than just “place arbitrary text on arbitrarily-sized button.” Pretty easy, eh? What’s in a name(plate)? Rounded buttons are pretty popular buttons nowadays, so let’s try something a bit more stylized. Have a gander at Brothers, a sturdy face from Emigre. The chiseled edges give us a perfect cue for a stylized button. Using the same slope, you can make plated-looking buttons that fit a different kind of style. Headlining You might even take some cues from the style of the typeface itself. Didone serifs are known for their lack of bracketsーthat is, a gradual transition from the stem to the serif. Instead, they typically connect at a right angle. Another common characteristic is the high contrast in the strokes: very thick stems, very thin serifs. So, when using a high contrast typeface, you can use it to your advantage to enhance hierarchy. Following our “multiples” guideline, a 12px measurement from the stems helps us create a top rule with a height of 24px (a multiple of 2). We can take the exact 1px measurement from the serif—a multiple of 1—to create the bottom rule. Voilà! I use this technique a lot. Swashbucklers And don’t forget the importance of visual “speed bumps” to break up long passages of text. A beautiful face like Alejandro Paul’s Ministry Script has over a thousand characters that can be manipulated or even combined to create elegant interface elements. Altering the partial differential character (∂) creates a delightful ornament that can help to guide the eye through content. Stagger & Swagger What about layout? How can we use typography to inform how our content is displayed? Let’s take a typeface like Assembler. We might use this for a design that needs to feel uneasy or uncomfortable. In design terms, that might translate into using irregular shapes and asymmetry. Using the proportional distances and degrees from the perpendiculars, we could easily create a multi-column layout that jives with the general tone. And for all you skeptics that don’t think a layout like this is doable on the web, stranger things have happened. Background texture generously offered by Bittbox. Overall Design Direction Finally, your typography could impact the entire look of the site, from the navigation to the interaction and everything in between. Check out how the (now-defunct) Nike Free site’s typography echoes the product itself, and in turn influences the navigation. Find Your Type With thousands of fonts to choose from, the possibilities are ridiculously open. From angles to radii to color to weight, you’ve got endless fodder before you. Great type designers spent countless hours slaving over these detailed letterforms; take advantage of it! Don’t feel like you have to limit yourself to the same old Helvetica and wet floors… unless your design calls for it. Happy hunting!",2009,Dan Mall,danmall,2009-12-07T00:00:00+00:00,https://24ways.org/2009/type-inspired-interfaces/,design 173,Real Fonts and Rendering: The New Elephant in the Room,"My friend, the content strategist Kristina Halvorson, likes to call content “the elephant in the room” of web design. She means it’s the huge problem that no one on the web development team or client side is willing to acknowledge, face squarely, and plan for. A typical web project will pass through many helpful phases of research, and numerous beneficial user experience design iterations, while the content—which in most cases is supposed to be the site’s primary focus—gets handled haphazardly at the end. Hence, elephant in the room, and hence also artist Kevin Cornell’s recent use of elephantine imagery to illustrate A List Apart articles on the subject. But I digress. Without discounting the primacy of the content problem, we web design folk have now birthed ourselves a second lumbering mammoth, thanks to our interest in “real fonts on the web“ (the unfortunate name we’ve chosen for the recent practice of serving web-licensed fonts via CSS’s decade-old @font-face declaration—as if Georgia, Verdana, and Times were somehow unreal). For the fact is, even bulletproof and mo’ bulletproofer @font-face CSS syntax aren’t really bulletproof if we care about looks and legibility across browsers and platforms. Hyenas in the Breakfast Nook The problem isn’t just that foundries have yet to agree on a standard font format that protects their intellectual property. And that, even when they do, it will be a while before all browsers support that standard—leaving aside the inevitable politics that impede all standardization efforts. Those are problems, but they’re not the elephant. Call them the coyotes in the room, and they’re slowly being tamed. Nor is the problem that workable, scalable business models (of which Typekit‘s is the most visible and, so far, the most successful) are still being shaken out and tested. The quality and ease of use of such services, their stability on heavily visited sites (via massively backed-up server clusters), and the fairness and sustainability of their pricing will determine how licensing and serving “real fonts” works in the short and long term for the majority of designer/developers. Nor is our primary problem that developers with no design background may serve ugly or illegible fonts that take forever to load, or fonts that take a long time to download and then display as ordinary system fonts (as happens on, say, about.validator.nu). Ugliness and poor optimization on the web are nothing new. That support for @font-face in Webkit and Mozilla browsers (and for TrueType fonts converted to Embedded OpenType in Internet Explorer) adds deadly weapons to the non-designer’s toolkit is not the technology’s fault. JavaScript and other essential web technologies are equally susceptible to abuse. Beauty is in the Eye of the Rendering Engine No, the real elephant in the room—the thing few web developers and no “web font” enthusiasts are talking about—has to do with legibility (or lack thereof) and aesthetics (or lack thereof) across browsers and platforms. Put simply, even fonts optimized for web use (which is a whole thing: ask a type designer) will not look good in every browser and OS. That’s because every browser treats hinting differently, as does every OS, and every OS version. Firefox does its own thing in both Windows and Mac OS, and Microsoft is all over the place because of its need to support multiple generations of Windows and Cleartype and all kinds of hardware simultaneously. Thus “real type” on a single web page can look markedly different, and sometimes very bad, on different computers at the same company. If that web page is your company’s, your opinion of “web fonts” may suffer, and rightfully. (The advantage of Apple’s closed model, which not everyone likes, is that it allows the company to guarantee the quality and consistency of user experience.) As near as my font designer friends and I can make out, Apple’s Webkit in Safari and iPhone ignores hinting and creates its own, which Apple thinks is better, and which many web designers think of as “what real type looks like.” The forked version of Webkit in Chrome, Android, and Palm Pre also creates its own hinting, which is close to iPhone’s—close enough that Apple, Palm, and Google could propose it as a standard for use in all browsers and platforms. Whether Firefox would embrace a theoretical Apple and Google standard is open to conjecture, and I somehow have difficulty imagining Microsoft buying in—even though they know the web is more and more mobile, and that means more and more of their customers are viewing web content in some version of Webkit. The End of Simple There are ways around this ugly type ugliness, but they involve complicated scripting and sniffing—the very nightmares from which web standards and the simplicity of @font-face were supposed to save us. I don’t know that even mighty Typekit has figured out every needed variation yet (although, working with foundries, they probably will). For type foundries, the complexity and expense of rethinking classic typefaces to survive in these hostile environments may further delay widespread adoption of web fonts and the resolution of licensing and formatting issues. The complexity may also force designers (even those who prefer to own) to rely on a hosted rental model simply to outsource and stay current with the detection and programming required. Forgive my tears. I stand in a potter’s field of ideas like “Keep it simple,” by a grave whose headstone reads “Write once, publish everywhere.”",2009,Jeffrey Zeldman,jeffreyzeldman,2009-12-22T00:00:00+00:00,https://24ways.org/2009/real-fonts-and-rendering/,design 167,Back To The Future of Print,"By now we have weathered the storm that was the early days of web development, a dangerous time when we used tables, inline CSS and separate pages for print only versions. We can reflect in a haggard old sea-dog manner (“yarrr… I remember back in the browser wars…”) on the bad practices of the time. We no longer need convincing that print stylesheets are the way to go1, though some of the documentation for them is a little outdated now. I am going to briefly cover 8 tips and 4 main gotchas when creating print stylesheets in our more enlightened era. Getting started As with regular stylesheets, print CSS can be included in a number of ways2, for our purposes we are going to be using the link element. This is still my favourite way of linking to CSS files, its easy to see what files are being included and to what media they are being applied to. Without the media attribute specified the link element defaults to the media type ‘all’ which means that the styles within then apply to print and screen alike. The media type ‘screen’ only applies to the screen and wont be picked up by print, this is the best way of hiding styles from print. Make sure you include your print styles after all your other CSS, because you will need to override certain rules and this is a lot easier if you are flowing with the cascade than against it! Another thing you should be thinking is ‘does it need to be printed’. Consider the context3, if it is not a page that is likely to be printed, such as a landing page or a section index then the print styles should resemble the way the page looks on the screen. Context is really important for the design of your print stylesheet, all the tips and tricks that follow should be taken in the context of the page. If for example you are designing a print stylesheet for an item in a shopping cart, it is irrelevant for the user to know the exact url of the link that takes them to your checkout. Tips and tricks During these tip’s we are going to build up print styles for a textileRef:11112857385470b854b8411:linkStartMarker:“simple example”:/examples/back-to-the-future-of-print/demo-1.html 1. Remove the cruft First things first, navigation, headers and most page furniture are pretty much useless and dead space in print so they will need to be removed, using display:none;. 2. Linearise your content Content doesn’t work so well in columns in print, especially if the content columns are long and intend to stretch over multiple columns (as mentioned in the gotcha section below). You might want to consider Lineariseing the content to flow down the page. If you have your source order in correct priority this will make things a lot easier4. 3. Improve your type Once you have removed all the useless cruft and jiggled things about a bit, you can concentrate more on the typography of the page. Typography is a complex topic5, but simply put serif-ed fonts such as Georgia work better on print and sans serif-ed fonts such as Verdana are more appropriate for screen use. You will probably want to increase font size and line height and change from px to pt (which is specifically a print measurement). 4. Go wild on links There are some incredibly fun things you can do with links in print using CSS. There are two schools of thought, one that consider it is best to disguise inline links as body text because they are not click-able on paper. Personally I believe it is useful to know for reference that the document did link to somewhere originally. When deciding which approach to take, consider the context of your document, do people need to know where they would have gone to? will it help or hinder them to know this information? Also for an alternative to the below, take a look at Aaron Gustafson’s article on generating footnotes for print6. Using some clever selector trickery and CSS generated content you can have the location of the link generated after the link itself. HTML:

I wish Google could find my keys

CSS: a:link:after, a:visited:after, a:hover:after, a:active:after { content: "" <"" attr(href) ""> ""; } But this is not perfect, in the above example the content of the href is just naively plonked after the link text: I wish Google would find my keys As looking back over this printout the user is not immediately aware of the location of the link, a better solution is to use even more crazy selectors to deal with relative links. We can also add a style to the generated content so it is distinguishable from the link text itself. CSS: a:link:after, a:visited:after, a:hover:after, a:active:after { content: "" <"" attr(href) ""> ""; color: grey; font-style: italic; font-weight: normal; } a[href^=""/""]:after { content: "" ""; } The output is now what we were looking for (you will need to replace example.com with your own root URL): I wish Google would find my keys Using regular expressions on the attribute selectors, one final thing you can do is to suppress the generated content on mailto: links, if for example you know the link text always reflects the email address. Eg: HTML: me@example.com CSS: a[href^=""mailto""]:after { content: """"; } This example shows the above in action. Of course with this clever technique, there are the usual browser support issues. While it won’t look as intended in browsers such as Internet Explorer 6 and 7 (IE6 and IE7) it will not break either and will just degrade gracefully because IE cannot do generated content. To the best of my knowledge Safari 2+ and Opera 9.X support a colour set on generated content whereas Firefox 2 & Camino display this in black regardless of the link or inherited text colour. 5. Jazz your headers for print This is more of a design consideration, don’t go too nuts though; there are a lot more limitations in print media than on screen. For this example we are going to go for is having a bottom border on h2’s and styling other headings with graduating colors or font sizes. And here is the example complete with jazzy headers. 6. Build in general hooks If you are building a large site with many different types of page, you may find it useful to build into your CSS structure, classes that control what is printed (e.g. noprint and printonly). This may not be semantically ideal, but in the past I have found it really useful for maintainability of code across large and varied sites 7. For that extra touch of class When printing pages from a long URL, even if the option is turned on to show the location of the page in the header, browsers may still display a truncated (and thus useless) version. Using the above tip (or just simply setting to display:none in screen and display:block in print) you can insert the URL of the page you are currently on for print only, using JavaScript’s window.location.href variable. function addPrintFooter() { var p = document.createElement('p'); p.className = 'print-footer'; p.innerHTML = window.location.href; document.body.appendChild(p); } You can then call this function using whichever onload or ondomready handler suits your fancy. Here is our familiar demo to show all the above in action 8. Tabular data across pages If you are using tabled data in your document there are a number of things you can do to increase usability of long tables over several pages. If you use the element this should repeat your table headers on the next page should your table be split. You will need to set thead {display: table-header-group;} explicitly for IE even though this should be the default value. Also if you use tr {page-break-inside: avoid;} this should (browser support depending) stop your table row from breaking across two pages. For more information on styling tables for print please see the CSS discuss wiki7. Gotchas 1. Where did all my content go? Absolutely the most common mistake I see with print styles is the truncated content bug. The symptom of this is that only the first page of a div’s content will be printed, the rest will look truncated after this. Floating long columns may still have this affect, as mentioned in Eric Meyer’s article on ‘A List Apart’ article from 20028; though in testing I am no longer able to replicate this. Using overflow:hidden on long content in Firefox however still causes this truncation. Overflow hidden is commonly used to clear floats9. A simple fix can be applied to resolve this, if the column is floated you can override this with float:none similarly overflow:hidden can be overridden with overflow:visible or the offending rules can be banished to a screen only stylesheet. Using position:absolute on long columns also has a very similar effect in truncating the content, but can be overridden in print with position:static; Whilst I only recommend having a print stylesheet for content pages on your site; do at least check other landing pages, section indexes and your homepage. If these are inaccessible in print possibly due to the above gotcha, it might be wise to provide a light dusting of print styles or move the offending overflow / float rules to a screen only stylesheet to fix the issues. 2. Damn those background browser settings One of the factors of life you now need to accept is that you can’t control the user’s browser settings, no more than you can control whether or not they use IE6. Most browsers by default will not print background colours or images unless explicitly told to by the user. Naturally this causes a number of problems, for starters you will need to rethink things like branding. At this point it helps if you are doing the print styles early in the project so that you can control the logo not being a background image for example. Where colour is important to the meaning of the document, for example a status on an invoice, bear in mind that a textural representation will also need to be supplied as the user may be printing in black and white. Borders will print however regardless of setting, so assuming the user is printing in colour you can always use borders to indicate colour. Check the colour contrast of the text against white, this may need to be altered without backgrounds. You should check how your page looks with backgrounds turned on too, for consistency with the default browser settings you may want to override your background anyway. One final issue with backgrounds being off is list items. It is relatively common practice to suppress the list-style-type and replace with a background image to finely control the bullet positioning. This technique doesn’t translate to print, you will need to disable this background bullet and re-instate your trusty friend the list-style-type. 3. Using JavaScript in your CSS? … beware IE6 Internet explorer has an issue that when Javascript is used in a stylesheet it applies this to all media types even if only applied to screen. For example, if you happen to be using expressions to set a width for IE, perhaps to mimic min-width, a simple width:100% !important rule can overcome the effects the expression has on your print styles10. 4. De-enhance your Progressive enhancements Quite a classic “doh” moment is when you realise that, of course paper doesn’t support Javascript. If you have any dynamic elements on the page, for example a document collapsed per section, you really should have been using Progressive enhancement techniques11 and building for browsers without Javascript first, adding in the fancy stuff later. If this is the case it should be trivial to override your wizzy JS styles in your print stylesheet, to display all your content and make it accessible for print, which is by far the best method of achieving this affect. And Finally… I refer you back to the nature of the document in hand, consider the context of your site and the page. Use the tips here to help you add that extra bit of flair to your printed media. Be careful you don’t get caught out by the common gotchas, keep the design simple, test cross browser and relish in the medium of print. Further Reading 1 For more information constantly updated, please see the CSS discuss wiki on print stylesheets 2 For more information on media types and ways of including CSS please refer to the CSS discuss wiki on Media Stylesheets 3 Eric Meyer talks to ThinkVitamin about the importance of context when designing your print strategy. 4 Mark Boulton describes how he applies a newspaper like print stylesheet to an article in the Guardian website. Mark also has some persuasive arguments that print should not be left to last 5 Richard Rutter Has a fantastic resource on typography which also applies to print. 6 Aaron Gustafson has a great solution to link problem by creating footnotes at the end of the page. 7 The CSS discuss wiki has more detailed information on printing tables and detailed browser support 8 This ‘A List Apart’ article is dated May 10th 2002 though is still mostly relevant 9 Float clearing technique using ‘overflow:hidden’ 10 Autistic Cuckoo describes the interesting insight with regards to expressions specified for screen in IE6 remaining in print 11 Wikipedia has a good article on the definition of progressive enhancement 12 For a really neat trick involving a dynamically generated column to displaying and meanings (as well as somewhere for the user to write notes), try print previewing on Brian Suda’s site",2007,Natalie Downe,nataliedowne,2007-12-09T00:00:00+00:00,https://24ways.org/2007/back-to-the-future-of-print/,design 152,CSS for Accessibility,"CSS is magical stuff. In the right hands, it can transform the plainest of (well-structured) documents into a visual feast. But it’s not all fur coat and nae knickers (as my granny used to say). Here are some simple ways you can use CSS to improve the usability and accessibility of your site. Even better, no sexy visuals will be harmed by the use of these techniques. Promise. Nae knickers This is less of an accessibility tip, and more of a reminder to check that you’ve got your body background colour specified. If you’re sitting there wondering why I’m mentioning this, because it’s a really basic thing, then you might be as surprised as I was to discover that from a sample of over 200 sites checked last year, 35% of UK local authority websites were missing their body background colour. Forgetting to specify your body background colour can lead to embarrassing gaps in coverage, which are not only unsightly, but can prevent your users reading the text on your site if they use a different operating system colour scheme. All it needs is the following line to be added to your CSS file: body {background-color: #fff;} If you pair it with color: #000; … you’ll be assured of maintaining contrast for any areas you inadvertently forget to specify, no matter what colour scheme your user needs or prefers. Even better, if you’ve got standard reset CSS you use, make sure that default colours for background and text are specified in it, so you’ll never be caught with your pants down. At the very least, you’ll have a white background and black text that’ll prompt you to change them to your chosen colours. Elbow room Paying attention to your typography is important, but it’s not just about making it look nice. Careful use of the line-height property can make your text more readable, which helps everyone, but is particularly helpful for those with dyslexia, who use screen magnification or simply find it uncomfortable to read lots of text online. When lines of text are too close together, it can cause the eye to skip down lines when reading, making it difficult to keep track of what you’re reading across. So, a bit of room is good. That said, when lines of text are too far apart, it can be just as bad, because the eye has to jump to find the next line. That not only breaks up the reading rhythm, but can make it much more difficult for those using Screen Magnification (especially at high levels of magnification) to find the beginning of the next line which follows on from the end of the line they’ve just read. Using a line height of between 1.2 and 1.6 times normal can improve readability, and using unit-less line heights help take care of any pesky browser calculation problems. For example: p { font-family: ""Lucida Grande"", Lucida, Verdana, Helvetica, sans-serif; font-size: 1em; line-height: 1.3; } or if you want to use the shorthand version: p { font: 1em/1.3 ""Lucida Grande"", Lucida, Verdana, Helvetica, sans-serif; } View some examples of different line-heights, based on default text size of 100%/1em. Further reading on Unitless line-heights from Eric Meyer. Transformers: Initial case in disguise Nobody wants to shout at their users, but there are some occasions when you might legitimately want to use uppercase on your site. Avoid screen-reader pronunciation weirdness (where, for example, CONTACT US would be read out as Contact U S, which is not the same thing – unless you really are offering your users the chance to contact the United States) caused by using uppercase by using title case for your text and using the often neglected text-transform property to fake uppercase. For example: .uppercase { text-transform: uppercase } Don’t overdo it though, as uppercase text is harder to read than normal text, not to mention the whole SHOUTING thing. Linky love When it comes to accessibility, keyboard only users (which includes those who use voice recognition software) who can see just fine are often forgotten about in favour of screen reader users. This Christmas, share the accessibility love and light up those links so all of your users can easily find their way around your site. The link outline AKA: the focus ring, or that dotted box that goes around links to show users where they are on the site. The techniques below are intended to supplement this, not take the place of it. You may think it’s ugly and want to get rid of it, especially since you’re going to the effort of tarting up your links. Don’t. Just don’t. The non-underlined underline If you listen to Jacob Nielsen, every link on your site should be underlined so users know it’s a link. You might disagree with him on this (I know I do), but if you are choosing to go with underlined links, in whatever state, then remove the default underline and replacing it with a border that’s a couple of pixels away from the text. The underline is still there, but it’s no longer cutting off the bottom of letters with descenders (e.g., g and y) which makes it easier to read. This is illustrated in Examples 1 and 2. You can modify the three lines of code below to suit your own colour and border style preferences, and add it to whichever link state you like. text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; Standing out from the crowd Whatever way you choose to do it, you should be making sure your links stand out from the crowd of normal text which surrounds them when in their default state, and especially in their hover or focus states. A good way of doing this is to reverse the colours when on hover or focus. Well-focused Everyone knows that you can use the :hover pseudo class to change the look of a link when you mouse over it, but, somewhat ironically, people who can see and use a mouse are the group who least need this extra visual clue, since the cursor handily (sorry) changes from an arrow to a hand. So spare a thought for the non-pointing device users that visit your site and take the time to duplicate that hover look by using the :focus pseudo class. Of course, the internets being what they are, it’s not quite that simple, and predictably, Internet Explorer is the culprit once more with it’s frustrating lack of support for :focus. Instead it applies the :active pseudo class whenever an anchor has focus. What this means in practice is that if you want to make your links change on focus as well as on hover, you need to specify focus, hover and active. Even better, since the look and feel necessarily has to be the same for the last three states, you can combine them into one rule. So if you wanted to do a simple reverse of colours for a link, and put it together with the non-underline underlines from before, the code might look like this: a:link { background: #fff; color: #000; font-weight: bold; text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; } a:visited { background: #fff; color: #800080; font-weight: bold; text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; } a:focus, a:hover, a:active { background: #000; color: #fff; font-weight: bold; text-decoration: none; border-bottom: 1px #000 solid; padding-bottom: 2px; } Example 3 shows what this looks like in practice. Location, Location, Location To take this example to it’s natural conclusion, you can add an id of current (or something similar) in appropriate places in your navigation, specify a full set of link styles for current, and have a navigation which, at a glance, lets users know which page or section they’re currently in. Example navigation using location indicators. and the source code Conclusion All the examples here are intended to illustrate the concepts, and should not be taken as the absolute best way to format links or style navigation bars – that’s up to you and whatever visual design you’re using at the time. They’re also not the only things you should be doing to make your site accessible. Above all, remember that accessibility is for life, not just for Christmas.",2007,Ann McMeekin,annmcmeekin,2007-12-13T00:00:00+00:00,https://24ways.org/2007/css-for-accessibility/,design 151,Get In Shape,"Pop quiz: what’s wrong with the following navigation? Maybe nothing. But then again, maybe there’s something bugging you about the way it comes together, something you can’t quite put your finger on. It seems well-designed, but it also seems a little… off. The design decisions that led to this eventual form were no doubt well-considered: Client: The top level needs to have a “current page” status indicator of some sort. Designer: How about a white tab? Client: Great! The second level needs to show up underneath the first level though… Designer: Okay, but that white tab I just added makes it hard to visually connect the bottom nav to the top. Client: Too late, we’ve seen the white tab and we love it. Try and make it work. Designer: Right. So I placed the second level in its own box. Client: Hmm. They seem too separated. I can’t tell that the yellow nav is the second level of the first. Designer: How about an indicator arrow? Client: Brilliant! The problem is that the end result feels awkward and forced. During the design process, little decisions were made that ultimately affect the overall shape of the navigation. What started out as a neatly contained rounded rectangle ended up as an ambiguous double shape that looks funny, though it’s often hard to pinpoint precisely why. The Shape of Things Well the why in this case is because seemingly unrelated elements in a design still end up visually interacting. Adding a new item to a page impacts everything surrounding it. In this navigation example, we’re looking at two individual objects that are close enough to each other that they form a relationship; if we reduce them to strictly their outlines, it’s a little easier to see that this particular combination registers oddly. The two shapes float with nothing really grounding them. If they were connected, perhaps it would be a different story. The white tab divides the top shape in half, leaving a gap in the middle of it. There’s very little balance in this pairing because the overall shape of the navigation wasn’t considered during the design process. Here’s another example: Gmail. Great email client, but did you ever closely look at what’s going on in that left hand navigation? The continuous blue bar around the message area spills out into the navigation. If we remove all text, we’re left with this odd configuration: Though the reasoning for anchoring the navigation highlight against the message area might be sound, the result is an irregular shape that doesn’t correspond with anything in reality. You may never consciously notice it, but once you do it’s hard to miss. One other example courtesy of last.fm: The two header areas are the same shade of pink so they appear to be closely connected. When reduced to their outlines it’s easy to see that this combination is off-balance: the edges don’t align, the sharp corners of the top shape aren’t consistent with the rounded corners of the bottom, and the part jutting out on the right of the bottom one seems fairly random. The result is a duo of oddly mis-matched shapes. Design Strategies Our minds tend to pick out familiar patterns. A clever designer can exploit this by creating references in his or her work to shapes and combinations with which viewers are already familiar. There are a few simple ideas that can be employed to help you achieve this: consistency, balance, and completion. Consistency A fairly simple way to unify the various disparate shapes on a page is by designing them with a certain amount of internal consistency. You don’t need to apply an identical size, colour, border, or corner treatment to every single shape; devolving a design into boring repetition isn’t what we’re after here. But it certainly doesn’t hurt to apply a set of common rules to most shapes within your work. Consider purevolume and its multiple rounded-corner panels. From the bottom of the site’s main navigation to the grey “Extras” panels halfway down the page (shown above), multiple shapes use a common border radius for unity. Different colours, different sizes, different content, but the consistent outlines create a strong sense of similarity. Not that every shape on the site follows this rule; they break the pattern right at the top with a darker sharp-cornered header, and again with the thumbnails below. But the design remains unified, nonetheless. Balance Arguably the biggest problem with the last.fm example earlier is one of balance. The area poking out of the bottom shape created a fairly obvious imbalance for no apparent reason. The right hand side is visually emphasized due to the greater area of pink coverage, but with the white gap left beside it, the emphasis seems unwarranted. It’s possible to create tension in your design by mismatching shapes and throwing off the balance, but when that happens unintentionally it can look like a mistake. Above are a few examples of design elements in balanced and unbalanced configurations. The examples in the top row are undeniably more pleasing to the eye than those in the bottom row. If these were fleshed out into full designs, those derived from the templates in the top row would naturally result in stronger work. Take a look at the header on 9Rules for a study in well-considered balance. On the left you’ll see a couple of paragraphs of text, on the right you have floating navigational items, and both flank the site’s logo. This unusual layout combines multiple design elements that look nothing alike, and places them together in a way that anchors each so that no one weighs down the header. Completion And finally we come to the idea of completion. Shapes don’t necessarily need hard outlines to be read visually as shapes, which can be exploited for various purposes. Notice how Zend’s mid-page “Business Topics” and “News” items (below) fade out to the right and bottom, but the placement of two of these side-by-side creates an impression of two panels rather than three disparate floating columns. By allowing the viewer’s eye to complete the shapes, they’ve lightened up the design of the page and removed inessential lines. In a busy design this technique could prove quite handy. Along the same lines, the individual shapes within your design may also be combined visually to form outlines of larger shapes. The differently-coloured header and main content/sidebar shapes on Veerle’s blog come together to form a single central panel, further emphasized by the slight drop shadow to the right. Implementation Studying how shape can be used effectively in design is simply a starting point. As with all things design-related, there are no hard and fast rules here; ultimately you may choose to bring these principles into your work more often, or break them for effect. But understanding how shapes interact within a page, and how that effect is ultimately perceived by viewers, is a key design principle you can use to impress your friends.",2007,Dave Shea,daveshea,2007-12-16T00:00:00+00:00,https://24ways.org/2007/get-in-shape/,design 149,Underpants Over My Trousers,"With Christmas approaching faster than a speeding bullet, this is the perfect time for you to think about that last minute present to buy for the web geek in your life. If you’re stuck for ideas for that special someone, forget about that svelte iPhone case carved from solid mahogany and head instead to your nearest comic-book shop and pick up a selection of comics or graphic novels. (I’ll be using some of my personal favourite comic books as examples throughout). Trust me, whether your nearest and dearest has been reading comics for a while or has never peered inside this four-colour world, they’ll thank-you for it. Aside from indulging their superhero fantasies, comic books can provide web designers with a rich vein of inspiring ideas and material to help them create shirt button popping, trouser bursting work for the web. I know from my own personal experience, that looking at aspects of comic book design, layout and conventions and thinking about the ways that they can inform web design has taken my design work in often-unexpected directions. There are far too many fascinating facets of comic book design that provide web designers with inspiration to cover in the time that it takes to pull your underpants over your trousers. So I’m going to concentrate on one muscle bound aspect of comic design, one that will make you think differently about how you lay out the content of your pages in panels. A suitcase full of Kryptonite Now, to the uninitiated onlooker, the panels of a comic book may appear to perform a similar function to still frames from a movie. But inside the pages of a comic, panels must work harder to help the reader understand the timing of a story. It is this method for conveying narrative timing to a reader that I believe can be highly useful to designers who work on the web as timing, drama and suspense are as important in the web world as they are in worlds occupied by costumed crime fighters and superheroes. I’d like you to start by closing your eyes and thinking about your own process for laying out panels of content on a page. OK, you’ll actually be better off with your eyes open if you’re going to carry on reading. I’ll bet you a suitcase full of Kryptonite that you often, if not always, structure your page layouts, and decide on the dimensions of those panels according to either: The base grid that you are working to The Golden Ratio or another mathematical schema More likely, I bet that you decide on the size and the number of your panels based on the amount of content that will be going into them. From today, I’d like you to think about taking a different approach. This approach not only addresses horizontal and vertical space, but also adds the dimension of time to your designs. Slowing down the action A comic book panel not only acts as a container for its content but also indicates to a reader how much time passes within the panel and as a result, how much time the reader should focus their attention on that one panel. Smaller panels create swift eye movement and shorter bursts of attention. Larger panels give the perception of more time elapsing in the story and subconsciously demands that a reader devotes more time to focus on it. Concrete by Paul Chadwick (Dark Horse Comics) This use of panel dimensions to control timing can also be useful for web designers in designing the reading/user experience. Imagine a page full of information about a product or service. You’ll naturally want the reader to focus for longer on the key benefits of your offering rather than perhaps its technical specifications. Now take a look at this spread of pages from Watchmen by Alan Moore and Dave Gibbons. Watchmen by Alan Moore and Dave Gibbons (Diamond Comic Distributors 2004) Throughout this series of (originally) twelve editions, artist Dave Gibbons stuck rigidly to his 3×3 panels per page design and deviated from it only for dramatic moments within the narrative. In particular during the last few pages of chapter eleven, Gibbons adds weight to the impending doom by slowing down the action by using larger panels and forces the reader to think longer about what was coming next. The action then speeds up through twelve smaller panels until the final panel: nothing more than white space and yet one of the most iconic and thought provoking in the entire twelve book series. Watchmen by Alan Moore and Dave Gibbons (Diamond Comic Distributors 2004) On the web it is common for clients to ask designers to fill every pixel of screen space with content, perhaps not understanding the drama that can be added by nothing more than white space. In the final chapter, Gibbons emphasises the carnage that has taken place (unseen between chapters eleven and twelve) by presenting the reader with six full pages containing only single, large panels. Watchmen by Alan Moore and Dave Gibbons (Diamond Comic Distributors 2004) This drama, created by the artist’s use of panel dimensions to control timing, is a technique that web designers can also usefully employ when emphasising important areas of content. Think back for a moment to the home page of Apple Inc., during the launch of their iconic iPhone, where the page contained nothing more than a large image and the phrase “Say hello to iPhone”. Rather than fill the page with sales messages, Apple’s designers allowed the space itself to tell the story and created a real sense of suspense and expectation among their readers. Borders Whereas on the web, panel borders are commonly used to add emphasis to particular areas of content, in comic books they take on a different and sometimes opposite role. In the examples so far, borders have contained all of the action. Removing a border can have the opposite effect to what you might at first think. Rather than taking emphasis away from their content, in comics, borderless panels allow the reader’s eyes to linger for longer on the content adding even stronger emphasis. Concrete by Paul Chadwick (Dark Horse Comics) This effect is amplified when the borderless content is allowed to bleed to the edges of a page. Because the content is no longer confined, except by the edges of the page (both comic and web) the reader’s eye is left to wander out into open space. Concrete by Paul Chadwick (Dark Horse Comics) This type of open, borderless content panel can be highly useful in placing emphasis on the most important content on a page in exactly the very opposite way that we commonly employ on the web today. So why is time an important dimension to think about when designing your web pages? On one level, we are often already concerned with the short attention spans of visitors to our pages and should work hard to allow them to quickly and easily find and read the content that both they and we think is important. Learning lessons from comic book timing can only help us improve that experience. On another: timing, suspense and drama are already everyday parts of the web browsing experience. Will a reader see what they expect when they click from one page to the next? Or are they in for a surprise? Most importantly, I believe that the web, like comics, is about story telling: often the story of the experiences that a customer will have when they use our product or service or interact with our organisation. It is this element of story telling than can be greatly improved by learning from comics. It is exactly this kind of learning and adapting from older, more established and at first glance unrelated media that you will find can make a real distinctive difference to the design work that you create. Fill your stockings If you’re a visual designer or developer and are not a regular reader of comics, from the moment that you pick up your first title, I know that you will find them inspiring. I will be writing more, and speaking about comic design applied to the web at several (to be announced) events this coming year. I hope you’ll be slipping your underpants over your trousers and joining me then. In the meantime, here is some further reading to pick up on your next visit to a comic book or regular bookshop and slip into your stockings: Comics and Sequential Art by Will Eisner (Northern Light Books 2001) Understanding Comics: The Invisible Art by Scott McCloud (Harper Collins 1994) Have a happy superhero season. (I would like to thank all of the talented artists, writers and publishers whose work I have used as examples in this article and the hundreds more who inspire me every day with their tall tales and talent.)",2007,Andy Clarke,andyclarke,2007-12-14T00:00:00+00:00,https://24ways.org/2007/underpants-over-my-trousers/,design 148,Typesetting Tables,"Tables have suffered in recent years on the web. They were used for laying out web pages. Then, following the Web Standards movement, they’ve been renamed by the populous as `data tables’ to ensure that we all know what they’re for. There have been some great tutorials for the designing tables using CSS for presentation and focussing on the semantics in the displaying of data in the correct way. However, typesetting tables is a subtle craft that has hardly had a mention. Table design can often end up being a technical exercise. What data do we need to display? Where is the data coming from and what form will it take? When was the last time your heard someone talk about lining numerals? Or designing to the reading direction? Tables are not read like sentences When a reader looks at, and tries to understand, tabular data, they’re doing a bunch of things at the same time. Generally, they’re task based; they’re looking for something. They are reading horizontally AND vertically Reading a table is not like reading a paragraph in a novel, and therefore shouldn’t be typeset in the same way. Designing tables is information design, it’s functional typography—it’s not a time for eye candy. Typesetting tables Typesetting great looking tables is largely an exercise in restraint. Minimal interference with the legibility of the table should be in the forefront of any designers mind. When I’m designing tables I apply some simple rules: Plenty of negative space Use the right typeface Go easy on the background tones, unless you’re giving reading direction visual emphasis Design to the reading direction By way of explanation, here are those rules as applied to the following badly typeset table. Your default table This table is a mess. There is no consideration for the person trying to read it. Everything is too tight. The typeface is wrong. It’s flat. A grim table indeed. Let’s see what we can do about that. Plenty of negative space The badly typeset table has been set with default padding. There has been little consideration for the ascenders and descenders in the type interfering with the many horizontal rules. The first thing we do is remove most of the lines, or rules. You don’t need them – the data in the rows forms its own visual rules. Now, with most of the rules removed, the ones that remain mean something; they are indicating some kind of hierarchy to the help the reader understand what the different table elements mean – in this case the column headings. Now we need to give the columns and rows more negative space. Note the framing of the column headings. I’m giving them more room at the bottom. This negative space is active—it’s empty for a reason. The extra air in here also gives more hierarchy to the column headings. Use the right typeface The default table is set in a serif typeface. This isn’t ideal for a couple of reasons. This serif typeface has a standard set of text numerals. These dip below the baseline and are designed for using figures within text, not on their own. What you need to use is a typeface with lining numerals. These align to the baseline and are more legible when used for tables. Sans serif typefaces generally have lining numerals. They are also arguably more legible when used in tables. Go easy on the background tones, unless you’re giving reading direction visual emphasis We’ve all seen background tones on tables. They have their use, but my feeling is that use should be functional and not decorative. If you have a table that is long, but only a few columns wide, then alternate row shading isn’t that useful for showing the different lines of data. It’s a common misconception that alternate row shading is to increase legibility on long tables. That’s not the case. Shaded rows are to aid horizontal reading across multiple table columns. On wide tables they are incredibly useful for helping the reader find what they want. Background tone can also be used to give emphasis to the reading direction. If we want to emphasis a column, that can be given a background tone. Hierarchy As I said earlier, people may be reading a table vertically, and horizontally in order to find what they want. Sometimes, especially if the table is complex, we need to give them a helping hand. Visually emphasising the hierarchy in tables can help the reader scan the data. Column headings are particularly important. Column headings are often what a reader will go to first, so we need to help them understand that the column headings are different to the stuff beneath them, and we also need to give them more visual importance. We can do this by making them bold, giving them ample negative space, or by including a thick rule above them. We can also give the row titles the same level of emphasis. In addition to background tones, you can give emphasis to reading direction by typesetting those elements in bold. You shouldn’t use italics—with sans serif typefaces the difference is too subtle. So, there you have it. A couple of simple guidelines to make your tables cleaner and more readable.",2007,Mark Boulton,markboulton,2007-12-07T00:00:00+00:00,https://24ways.org/2007/typesetting-tables/,design 146,Increase Your Font Stacks With Font Matrix,"Web pages built in plain old HTML and CSS are displayed using only the fonts installed on users’ computers (@font-face implementations excepted). To enable this, CSS provides the font-family property for specifying fonts in order of preference (often known as a font stack). For example: h1 {font-family: 'Egyptienne F', Cambria, Georgia, serif} So in the above rule, headings will be displayed in Egyptienne F. If Egyptienne F is not available then Cambria will be used, failing that Georgia or the final fallback default serif font. This everyday bit of CSS will be common knowledge among all 24 ways readers. It is also a commonly held belief that the only fonts we can rely on being installed on users’ computers are the core web fonts of Arial, Times New Roman, Verdana, Georgia and friends. But is that really true? If you look in the fonts folder of your computer, or even your Mum’s computer, then you are likely to find a whole load of fonts besides the core ones. This is because many software packages automatically install extra typefaces. For example, Office 2003 installs over 100 additional fonts. Admittedly not all of these fonts are particularly refined, and not all are suitable for the Web. However they still do increase your options. The Matrix I have put together a matrix of (western) fonts showing which are installed with Mac and Windows operating systems, which are installed with various versions of Microsoft Office, and which are installed with Adobe Creative Suite. The matrix is available for download as an Excel file and as a CSV. There are no readily available statistics regarding the penetration of Office or Creative Suite, but you can probably take an educated guess based on your knowledge of your readers. The idea of the matrix is that use can use it to help construct your font stack. First of all pick the font you’d really like for your text – this doesn’t have to be in the matrix. Then pick the generic family (serif, sans-serif, cursive, fantasy or monospace) and a font from each of the operating systems. Then pick any suitable fonts from the Office and Creative Suite lists. For example, you may decide your headings should be in the increasingly ubiquitous Clarendon. This is a serif type face. At OS-level the most similar is arguably Georgia. Adobe CS2 comes with Century Old Style which has a similar feel. Century Schoolbook is similar too, and is installed with all versions of Office. Based on this your font stack becomes: font-family: 'Clarendon Std', 'Century Old Style Std', 'Century Schoolbook', Georgia, serif Note the ‘Std’ suffix indicating a ‘standard’ OpenType file, which will normally be your best bet for more esoteric fonts. I’m not suggesting the process of choosing suitable fonts is an easy one. Firstly there are nearly two hundred fonts in the matrix, so learning what each font looks like is tricky and potentially time consuming (if you haven’t got all the fonts installed on a machine to hand you’ll be doing a lot of Googling for previews). And it’s not just as simple as choosing fonts that look similar or have related typographic backgrounds, they need to have similar metrics as well, This is especially true in terms of x-height which gives an indication of how big or small a font looks. Over to You The main point of all this is that there are potentially more fonts to consider than is generally accepted, so branch out a little (carefully and tastefully) and bring a little variety to sites out there. If you come up with any novel font stacks based on this approach, please do blog them (tagged as per the footer) and at some point they could all be combined in one place for everyone to consider. Appendix What about Linux? The only operating systems in the matrix are those from Microsoft and Apple. For completeness, Linux operating systems should be included too, although these are many and varied and very much in a minority, so I omitted them for time being. For the record, some Linux distributions come packaged with Microsoft’s core fonts. Others use the Vera family, and others use the Liberation family which comprises fonts metrically identical to Times New Roman and Arial. Sources The sources of font information for the matrix are as follows: Windows XP SP2 Windows Vista Office 2003 Office 2007 Mac OSX Tiger Mac OSX Leopard (scroll down two thirds) Office 2004 (Mac) by inspecting my Microsoft Office 2004/Office/Fonts folder Office 2008 (Mac) is expected to be as Office 2004 with the addition of the Vista ClearType fonts Creative Suite 2 (see pdf link in first comment) Creative Suite 3",2007,Richard Rutter,richardrutter,2007-12-17T00:00:00+00:00,https://24ways.org/2007/increase-your-font-stacks-with-font-matrix/,design 141,Compose to a Vertical Rhythm,"“Space in typography is like time in music. It is infinitely divisible, but a few proportional intervals can be much more useful than a limitless choice of arbitrary quantities.” So says the typographer Robert Bringhurst, and just as regular use of time provides rhythm in music, so regular use of space provides rhythm in typography, and without rhythm the listener, or the reader, becomes disorientated and lost. On the Web, vertical rhythm – the spacing and arrangement of text as the reader descends the page – is contributed to by three factors: font size, line height and margin or padding. All of these factors must calculated with care in order that the rhythm is maintained. The basic unit of vertical space is line height. Establishing a suitable line height that can be applied to all text on the page, be it heading, body copy or sidenote, is the key to a solid dependable vertical rhythm, which will engage and guide the reader down the page. To see this in action, I’ve created an example with headings, footnotes and sidenotes. Establishing a suitable line height The easiest place to begin determining a basic line height unit is with the font size of the body copy. For the example I’ve chosen 12px. To ensure readability the body text will almost certainly need some leading, that is to say spacing between the lines. A line-height of 1.5em would give 6px spacing between the lines of body copy. This will create a total line height of 18px, which becomes our basic unit. Here’s the CSS to get us to this point: body { font-size: 75%; } html>body { font-size: 12px; } p { line-height 1.5em; } There are many ways to size text in CSS and the above approach provides and accessible method of achieving the pixel-precision solid typography requires. By way of explanation, the first font-size reduces the body text from the 16px default (common to most browsers and OS set-ups) down to the 12px we require. This rule is primarily there for Internet Explorer 6 and below on Windows: the percentage value means that the text will scale predictably should a user bump the text size up or down. The second font-size sets the text size specifically and is ignored by IE6, but used by Firefox, Safari, IE7, Opera and other modern browsers which allow users to resize text sized in pixels. Spacing between paragraphs With our rhythmic unit set at 18px we need to ensure that it is maintained throughout the body copy. A common place to lose the rhythm is the gaps set between margins. The default treatment by web browsers of paragraphs is to insert a top- and bottom-margin of 1em. In our case this would give a spacing between the paragraphs of 12px and hence throw the text out of rhythm. If the rhythm of the page is to be maintained, the spacing of paragraphs should be related to the basic line height unit. This is achieved simply by setting top- and bottom-margins equal to the line height. In order that typographic integrity is maintained when text is resized by the user we must use ems for all our vertical measurements, including line-height, padding and margins. p { font-size:1em; margin-top: 1.5em; margin-bottom: 1.5em; } Browsers set margins on all block-level elements (such as headings, lists and blockquotes) so a way of ensuring that typographic attention is paid to all such elements is to reset the margins at the beginning of your style sheet. You could use a rule such as: body,div,dl,dt,dd,ul,ol,li,h1,h2,h3,h4,h5,h6,pre,form,fieldset,p,blockquote,th,td { margin:0; padding:0; } Alternatively you could look into using the Yahoo! UI Reset style sheet which removes most default styling, so providing a solid foundation upon which you can explicitly declare your design intentions. Variations in text size When there is a change in text size, perhaps with a heading or sidenotes, the differing text should also take up a multiple of the basic leading. This means that, in our example, every diversion from the basic text size should take up multiples of 18px. This can be accomplished by adjusting the line-height and margin accordingly, as described following. Headings Subheadings in the example page are set to 14px. In order that the height of each line is 18px, the line-height should be set to 18 ÷ 14 = 1.286. Similarly the margins above and below the heading must be adjusted to fit. The temptation is to set heading margins to a simple 1em, but in order to maintain the rhythm, the top and bottom margins should be set at 1.286em so that the spacing is equal to the full 18px unit. h2 { font-size:1.1667em; line-height: 1.286em; margin-top: 1.286em; margin-bottom: 1.286em; } One can also set asymmetrical margins for headings, provided the margins combine to be multiples of the basic line height. In our example, a top margin of 1½ lines is combined with a bottom margin of half a line as follows: h2 { font-size:1.1667em; line-height: 1.286em; margin-top: 1.929em; margin-bottom: 0.643em; } Also in our example, the main heading is given a text size of 18px, therefore the line-height has been set to 1em, as has the margin: h1 { font-size:1.5em; line-height: 1em; margin-top: 0; margin-bottom: 1em; } Sidenotes Sidenotes (and other supplementary material) are often set at a smaller size to the basic text. To keep the rhythm, this smaller text should still line up with body copy, so a calculation similar to that for headings is required. In our example, the sidenotes are set at 10px and so their line-height must be increased to 18 ÷ 10 = 1.8. .sidenote { font-size:0.8333em; line-height:1.8em; } Borders One additional point where vertical rhythm is often lost is with the introduction of horizontal borders. These effectively act as shims pushing the subsequent text downwards, so a two pixel horizontal border will throw out the vertical rhythm by two pixels. A way around this is to specify horizontal lines using background images or, as in our example, specify the width of the border in ems and adjust the padding to take up the slack. The design of the footnote in our example requires a 1px horizontal border. The footnote contains 12px text, so 1px in ems is 1 ÷ 12 = 0.0833. I have added a margin of 1½ lines above the border (1.5 × 18 ÷ 12 = 2.5ems), so to maintain the rhythm the border + padding must equal a ½ (9px). We know the border is set to 1px, so the padding must be set to 8px. To specify this in ems we use the familiar calculation: 8 ÷ 12 = 0.667. Hit me with your rhythm stick Composing to a vertical rhythm helps engage and guide the reader down the page, but it takes typographic discipline to do so. It may seem like a lot of fiddly maths is involved (a few divisions and multiplications never hurt anyone) but good type setting is all about numbers, and it is this attention to detail which is the key to success.",2006,Richard Rutter,richardrutter,2006-12-12T00:00:00+00:00,https://24ways.org/2006/compose-to-a-vertical-rhythm/,design 140,Styling hCards with CSS,"There are plenty of places online where you can learn about using the hCard microformat to mark up contact details at your site (there are some resources at the end of the article). But there’s not yet been a lot of focus on using microformats with CSS. So in this installment of 24 ways, we’re going to look at just that – how microformats help make CSS based styling simpler and more logical. Being rich, quite complex structures, hCards provide designers with a sophisticated scaffolding for styling them. A recent example of styling hCards I saw, playing on the business card metaphor, was by Andy Hume, at http://thedredge.org/2005/06/using-hcards-in-your-blog/. While his approach uses fixed width cards, let’s take a look at how we might style a variable width business card style for our hCards. Let’s take a common hCard, which includes address, telephone and email details

Web Directions North

1485 Laperrière Avenue Ottawa ON K1Z 7S8 Canada Phone/Fax: Work: 61 2 9365 5007 Email: info@webdirections.org We’ll be using a variation on the now well established “sliding doors” technique (if you create a CSS technique, remember it’s very important to give it a memorable name or acronym, and bonus points if you get your name in there!) by Douglas Bowman, enhanced by Scott Schiller (see http://www.schillmania.com/projects/dialog/,) which will give us a design which looks like this The technique, in a nutshell, uses background images on four elements, two at the top, and two at the bottom, to add each rounded corner. We are going to make this design “fluid” in the sense that it grows and shrinks in proportion with the size of the font that the text of the element is displayed with. This is sometimes referred to as an “em driven design” (we’ll see why in a moment). To see how this works in practice, here’s the same design with the text “zoomed” up in size and the same design again, when we zoom the text size down By the way, the hCard image comes from Chris Messina, and you can download it and other microformat icons from the microformats wiki. Now, with CSS3, this whole task would be considerably easier, because we can add multiple background images to an element, and border images for each edge of an element. Safari, version 1.3 up, actually supports multiple background images, but sadly, it’s not supported in Firefox 1.5, or even Firefox 2.0 (let’s not mention IE7 eh?). So it’s probably too little supported to use now. So instead we’ll use a technique that only involves CSS2, and works in pretty much any browser. Very often, developers add div or span elements as containers for these background images, and in fact, if you visit Scott Shiller’s site, that’s what he has done there. But if at all possible we shouldn’t be adding any HTML simply for presentational purposes, even if the presentation is done via CSS. What we can do is to use the HTML we have already, as much as is possible, to add the style we want. This can take some creative thinking, but once you get the hang of this approach it becomes a more natural way of using HTML compared with simply adding divs and spans at will as hooks for style. Of course, this technique isn’t always simple, and in fact sometimes simply not possible, requiring us to add just a little HTML to provide the “hooks” for CSS. Let’s go to work The first step is to add a background image to the whole vCard element. We make this wide enough (for example 1000 or more pixels) and tall enough that no matter how large the content of the vCard grows, it will never overflow this area. We can’t simply repeat the image, because the top left corner will show when the image repeats. We add this as the background image of the vCard element using CSS. While we are at it, let’s give the text a sans-serif font, some color so that it will be visible, and stop the image repeating. .vcard { background-image: url(images/vcardfill.png); background-repeat: no-repeat; color: #666; font-family: ""Lucida Grande"", Verdana, Helvetica, Arial, sans-serif; } Which in a browser, will look something like this. Next step we need to add the top right hand corner of the hCard. In keeping with our aim of not adding HTML simply for styling purposes, we want to use the existing structure of the page where possible. Here, we’ll use the paragraph of class fn and org, which is the first child element of the vcard element.

Web Directions Conference Pty Ltd

Here’s our CSS for this element .fn { background-image: url(images/topright.png); background-repeat: no-repeat; background-position: top right; padding-top: 2em; font-weight: bold; font-size: 1.1em; } Again, we don’t want it to repeat, but this time, we’ve specified a background position for the image. This will make the background image start from the top, but its right edge will be located at the right edge of the element. I also made the font size a little bigger, and the weight bold, to differentiate it from the rest of the text in the hCard. Here’s the image we are adding as the background to this element. So, putting these two CSS statements together we get We specified a padding-top of 2em to give some space between the content of the fn element and the edge of the fn element. Otherwise the top of the hCard image would be hard against the border. To see this in action, just remove the padding-top: 2em; declaration and preview in a browser. So, with just two statements, we are well under way. We’ve not even had to add any HTML so far. Let’s turn to the bottom of the element, and add the bottom border (well, the background image which will serve as that border). Now, which element are we going to use to add this background image to? OK, here I have to admit to a little, teensie bit of cheating. If you look at the HTML of the hCard, I’ve grouped the email and telephone properties into a div, with a class of telecommunications. This grouping is not strictly requred for our hCard.

Phone/Fax: Work: 61 2 9365 5007

Email: info@webdirections.org

Now, I chose that class name because that is what the vCard specification calls this group of properties. And typically, I do tend to group together related elements using divs when I mark up content. I find it makes the page structure more logical and readable. But strictly speaking, this isn’t necessary, so you may consider it cheating. But my lesson in this would be, if you are going to add markup, try to make it as meaningful as possible. As you have probably guessed by now, we are going to add one part of the bottom border image to this element. We’re going to add this image as the background-image. Again, it will be a very wide image, like the top left one, so that no matter how wide the element might get, the background image will still be wide enough. Now, we’ll need to make this image sit in the bottom left of the element we attach it to, so we use a backgound position of left bottom (we put the horizontal position before the vertical). Here’s our CSS statement for this .telecommunications { background-image: url(images/bottom-left.png); background-repeat: no-repeat; background-position: left bottom; margin-bottom: 2em; } And that will look like this Not quite there, but well on the way. Time for the final piece in the puzzle. OK, I admit, I might have cheated just a little bit more in this step. But like the previous step, all valid, and (hopefully) quite justifiable markup. If we look at the HTML again, you’ll find that our email address is marked up like this

Email: info@webdirections.org

Typically, in hCard, the value part of this property isn’t required, and we could get away with info@webdirections.org The form I’ve used, with the span of class value is however, perfectly valid hCard markup (hard allows for multiple email addresses of different types, which is where this typically comes in handy). Why have I gone to all this trouble? Well, when it came to styling the hCard, I realized I needed a block element to attach the background image for the bottom right hand corner to. Typically the last block element in the containing element is the ideal choice (and sometimes it’s possible to take an inline element, for example the link here, and use CSS to make it a block element, and attach it to that, but that really doesn’t work with this design). So, if we are going to use the paragraph which contains the email link, we need a way to select it exclusively, which means that with CSS2 at least, we need a class or id as a hook for our CSS selector (in CSS3 we could use the last-child selector, which selects the last child element of a specified element, but again, as last child is not widely supported, we won’t rely on it here.) So, the least worst thing we could do is take an existing element, and add some reasonably meaningful markup to it. That’s why we gave the paragraph a class of email, and the email address a class of value. Which reminds me a little of a moment in Hamlet The lady doth protest too much, methinks OK, let’s get back to the CSS. We add the bottom right corner image, positioning it in the bottom right of the element, and making sure it doesn’t repeat. We also add some padding to the bottom, to balance out the padding we added to the top of the hCard. p.email { background-image: url(images/bottom-right.png); background-position: right bottom; background-repeat: no-repeat; padding-bottom: 2em; } Which all goes to make our hCard look like this It just remains for us to clean up a little. Let’s start from the top. We’ll float the download image to the right like this .vcard img { float: right; padding-right: 1em; margin-top: -1em } See how we didn’t have to add a class to style the image, we used the fact that the image is a descendent of the vcard element, and a descendent selector. In my experience, the very widely supported, powerful descendent selector is one of the most underused aspects of CSS. So if you don’t use it frequently, look into it in more detail. We added some space to the right of the image, and pulled it up a bit closer to the top of the hCard, like this We also want to add some whitespace between the edge of the hCard and the text. We would typically add padding to the left of the containing element, (in this case the vcard element) but this would break our bottom left hand corner, like this That’s because the div element we added this bottom left background image to would be moved in by the padding on its containing element. So instead, we add left margin to all the paragraphs in the hCard .vcard p { margin-left: 1em; } (there is the descendent selector again – it is the swiss army knife of CSS) Now, we’ve not yet made the width of the hCard a function of the size of the text inside it (or “em driven” as we described it earlier). We do this by giving the hCard a width that is specified in em units. Here we’ll set a width of say 28em, which makes the hCard always roughly as wide as 28 characters (strictly speaking 28 times the width of the letter capital M). So the statement for our containing vcard element becomes .vcard { background-image: url(images/vcardfill.png); background-repeat: no-repeat; color: #666; font-family: ""Lucida Grande"", Verdana, Helvetica, Arial, sans-serif; width: 28em; } and now our element will look like this We’ve used almost entirely the existing HTML from our original hCard (adding just a little, and trying as much as possible to keep that additional markup meaningful), and just 6 CSS statements. Holiday Bonus – a downloadable vCard Did you notice this part of the HTML What’s with the odd looking url

Gravity-Defying!

Lorem ipsum dolor ...

Let’s dive into code and in the markup you’ll see “is that an extra div?” … please don’t kill me? The #page div sets the width and bottom padding whose height is equal to the shadow we’re adding. The #page-contents div will set padding in ems to scale with the text size the user intends. The background color will be added here too but not overlapping the shadow where #page’s padding makes room. A simple technique that you may find amusing is to substitute a PNG for the GIF I was using. For that would be crafty and future-proof, too. The page curl could sit on any background hue. I hope you’ve enjoyed this easy little trick. It’s hardly earth-shattering, and arguably slick. But it could come in handy, you just never know. Happy Holidays! And pleasant dreams of web three point oh.",2006,Dan Cederholm,dancederholm,2006-12-24T00:00:00+00:00,https://24ways.org/2006/gravity-defying-page-corners/,design 131,Random Lines Made With Mesh,"I know that Adobe Illustrator can be a bit daunting for people who aren’t really advanced users of the program, but you would be amazed by how easy you can create cool effects or backgrounds. In this short tutorial I show you how to create a cool looking background only in 5 steps. Step 1 – Create Lines Create lines using random widths and harmonious suitable colors. If you get stuck on finding the right colors, check out Adobe’s Kuler and start experimenting. Step 2 – Convert Strokes to Fills Select all lines and convert them to fills. Go to the Object menu, select Path > Outline Stroke. Select the Rectangle tool and draw 1 big rectangle on top the lines. Give the rectangle a suitable color. With the rectangle still selected, go to the Object menu, select Arrange > Send to Back. Step 3 – Convert to Mesh Select all objects by pressing the command key (for Mac users), control key (for Windows users) + the “a” key. Go to the Object menu and select the Envelope Distort > Make with Mesh option. Enter 2 rows and 2 columns. Check the preview box to see what happens and click the OK button. Step 4 – Play Around with The Mesh Points Play around with the points of the mesh using the Direct Selection tool (the white arrow in the Toolbox). Click on the top right point of the mesh. Once you’re starting to drag hold down the shift key and move the point upwards. Now start dragging the bezier handles on the mesh to achieve the effect as shown in the above picture. Of course you can try out all kind of different effects here. The Final Result This is an example of how the final result can look. You can try out all kinds of different shapes dragging the handles of the mesh points. This is just one of the many results you can get. So next time you haven’t got inspiration for a background of a header, a banner or whatever, just experiment with a few basic shapes such as lines and try out the ‘Envelope Distort’ options in Illustrator or the ‘Make with Mesh’ option and experiment, you’ll be amazed by the unexpected creative results.",2006,Veerle Pieters,veerlepieters,2006-12-08T00:00:00+00:00,https://24ways.org/2006/random-lines-made-with-mesh/,design 111,Geometric Background Patterns,"When the design is finished and you’re about to start the coding process, you have to prepare your graphics. If you’re working with a pattern background you need to export only the repeating fragment. It can be a bit tricky to isolate a fragment to achieve a seamless pattern background. For geometric patterns there is a method I always follow and that I want to share with you. Take for example a perfect 45° diagonal line pattern. How do you define this pattern fragment so it will be rendered seamlessly? Here is the method I usually follow to avoid a mismatch. First, zoom in so you see enough detail and you can distinguish the pixels. Select the Rectangular Marquee Selection tool and start your selection at the intersection of 2 different colors of a diagonal line. Hold down the Shift key while dragging so you drag a perfect square. Release the mouse when you reach the exact same intesection (as your starting) point at the top right. Copy this fragment (using Copy Merged: Cmd/Ctrl + Shift + C) and paste the fragment in a new layer. Give this layer the name ‘pattern’. Now hold down the Command Key (Control Key on Windows) and click on the ‘pattern’ layer in the Layers Palette to select the fragment. Now go to Edit > Define Pattern, enter a name for your pattern and click OK. Test your pattern in a new document. Create a new document of 600 px by 400px, hit Cmd/Ctrl + A and go to Edit > Fill… and choose your pattern. If the result is OK, you have created a perfect pattern fragment. Below you see this pattern enlarged. The guides show the boundaries of the pattern fragment and the red pixels are the reference points. The red pixels at the top right, bottom right and bottom left should match the red pixel at the top left. This technique should work for every geometric pattern. Some patterns are easier than others, but this, and the Photoshop pattern fill test, has always been my guideline. Other geometric pattern examples Example 1 Not all geometric pattern fragments are squares. Some patterns look easy at first sight, because they look very repetitive, but they can be a bit tricky. Zoomed in pattern fragment with point of reference shown: Example 2 Some patterns have a clear repeating point that can guide you, such as the blue small circle of this pattern as you can see from this zoomed in screenshot: Zoomed in pattern fragment with point of reference shown: Example 3 The different diagonal colors makes a bit more tricky to extract the correct pattern fragment. The orange dot, which is the starting point of the selection is captured a few times inside the fragment selection:",2008,Veerle Pieters,veerlepieters,2008-12-02T00:00:00+00:00,https://24ways.org/2008/geometric-background-patterns/,design 108,A Festive Type Folly,"‘Tis the season to be jolly, so the carol singers tell us. At 24 ways, we’re keeping alive another British tradition that includes the odd faux-Greco-Roman building dotted around the British countryside, Tower Bridge built in 1894, and your Dad’s Christmas jumper with the dancing reindeer motif. ‘Tis the season of the folly! 24 Ways to impress your friends The example is not an image, just text. You may wish to see a screenshot in Safari to compare with your own operating system and browser rendering. Like all follies this is an embellishment — a bit of web typography fun. It’s similar to the masthead text at my place, but it’s also a hyperlink. Unlike the architectural follies of the past, no child labour was used to fund or build it, just some HTML flavoured with CSS, and a heavy dose of Times New Roman. Why Times New Roman, you ask? Well, after a few wasted hours experimenting with heaps of typefaces, seeking an elusive consistency of positioning and rendering across platforms, it proved to be the most consistent. Who’d‘a thought? To make things more interesting, I wanted to use a traditional scale and make the whole thing elastic by using relative lengths that would react to a person’s font size. So, to the meat of this festive frippery: There are three things we rely on to create this indulgence: Descendant selectors Absolute positioning Inheritance HTML & Descendant Selectors The markup for the folly might seem complex at first glance. To semantics pedants and purists it may seem outrageous. If that’s you, read on at your peril! Here it is with lots of whitespace: Why so much markup? Well, we want to individually style many of the glyphs. By nesting the elements, we can pick out the bits we need as descendant selectors. To retain a smidgen of semantics, the text is wrapped in

and elements. The two phrases, “24 ways” and “to impress your friends” are wrapped in and tags, respectively. Within those loving arms, their descendant s cascade invisibly, making a right mess of our source, but ready to be picked out in our CSS rules. So, to select the “2” from the example we can simply write, #type h1 em{ }. Of course, that selects everything within the tags, but as we drill down the document tree, selecting other glyphs, any property / value styles can be reset or changed as required. Pixels Versus Ems Before we get stuck into the CSS, I should say that the goal here is to have everything expressed in relative “em” lengths. However, when I’m starting out, I use pixels for all values, and only convert them to ems after I’ve finished. It saves re-calculating the em length for every change I make as the folly evolves, but still makes the final result elastic, without relying on browser zoom. To skip ahead, see the complete CSS. Absolutely Positioned Glyphs If a parent element has position: relative, or position: absolute applied to it, all children of that parent can be positioned absolutely relative to it. (See Dave Shea’s excellent introduction to this.) That’s exactly how the folly is achieved. As the parent, #type also has a font-size of 16px set, a width and height, and some basic style with a background and border: #type{ font-size: 16px; text-align: left; background: #e8e9de; border: 0.375em solid #fff; width: 22.5em; height: 13.125em; position: relative; } The h1 is also given a default style with a font-size of 132px in ems relative to the parent font-size of 16px: #type h1{ font-family: ""Times New Roman"", serif; font-size: 8.25em; /* 132px */ line-height: 1em; font-weight: 400; margin: 0; padding: 0; } To get the em value, we divide the required size in pixels by the actual parent font-size in pixels 132 ÷ 16 = 8.25 We also give the descendants of the h1 some default properties. The line height, style and weight are normalised, they are positioned absolutely relative to #type, and a border and padding is applied: #type h1 em, #type h1 strong, #type h1 span{ line-height: 1em; font-style: normal; font-weight: 400; position: absolute; padding: 0.1em; border: 1px solid transparent; } The padding ensures that some browsers don’t forget about parts of a glyph that are drawn outside of their invisible container. When this happens, IE will trim the glyph, cutting off parts of descenders, for example. The border is there to make sure the glyphs have layout. Without this, positioning can be problematic. IE6 will not respect the transparent border colour — it uses the actual text colour — but in all other respects renders the example. You can hack around it, but it seemed unnecessary for this example. Once these defaults are established, the rest is trial and error. As a quick example, the numeral “2” is first to be positioned: #type h1 a em{ font-size: 0.727em; /* (2) 96px */ left: 0.667em; top: 0; } Every element of the folly is positioned in exactly the same way as you can see in the complete CSS. When converting pixels to ems, the font-size is set first. Then, because we know what that is, we calculate the equivalent x- and y-position accordingly. Inheritance CSS inheritance gave me a headache a long time ago when I first encountered it. After the penny dropped I came to experience something disturbingly close to affection for this characteristic. What it basically means is that children inherit the characteristics of their parents. For example: We gave #type a font-size of 16px. For #type h1 we changed it by setting font-size: 8.25em;. Than means that #type h1 now has a computed font-size of 8.25 × 16px = 132px. Now, all children of #type h1 in the document tree will inherit a font-size of 132px unless we explicitly change it as we did for #type h1 a em. The “2” in the example — selected with #type h1 a em — is set at 96px with left and top positioning calculated relatively to that. So, the left position of 0.667em is 0.667 × 96 = 64px, approximately (three decimal points in em lengths don’t always give exact pixel equivalents). One way to look at inheritance is as a cascade of dependancy: In our example, the computed font size of any given element depends on that of the parent, and the absolute x- and y-position depends on the computed font size of the element itself. Link Colours The same descendant selectors we use to set and position the type are also used to apply the colour by combining them with pseudo-selectors like :focus and :hover. Because the descendant selectors are available to us, we can pretty much pick out any glyph we like. First, we need to disable the underline: #type h1 a:link, #type h1 a:visited{ text-decoration: none; } In our example, the “24” has a unique default state (colour): #type h1 a:link em, #type h1 a:visited em{ color: #624; } The rest of the “Ways” text has a different colour, which it shares with the large “s” in “impress”: #type h1 a:link em span span, #type h1 a:visited em span span, #type h1 a:link strong span span span span, #type h1 a:visited strong span span span span{ color: #b32720; } “24” changes on :focus, :hover and :active. Critically though, the whole of the “24 Ways” text, and the large “s” in “impress” all have the same style in this instance: #type h1 a:focus em, #type h1 a:hover em, #type h1 a:active em, #type h1 a:focus em span span, #type h1 a:hover em span span, #type h1 a:active em span span, #type h1 a:focus strong span span span span, #type h1 a:hover strong span span span span, #type h1 a:active strong span span span span{ color: #804; } If a descendant selector has a :link and :visited state set as a pseudo element, it needs to also have the corresponding :focus, :hover and :active states set. A Final Note About Web Typography From grids to basic leading to web fonts, and even absolute positioning, there’s a wealth of things we can do to treat type on the Web with love and respect. However, experiments like this can highlight the vagaries of rasterisation and rendering that limit our ability to achieve truly subtle and refined results. At the operating system level, the differences in type rendering are extreme, and even between sequential iterations in Windows — from Standard to ClearType — they can be daunting. Add to that huge variations in screen quality, and even the paper we print our type onto has many potential variations. Compare our example in Safari 3.2.1 / OS X 10.5.5 (left) and IE7 / Win XP (right). Both rendered on a 23” Apple Cinema HD (LCD): Browser developers continue to make great strides. However, those of us who set type on the Web need more consistency and quality if we want to avoid technologies like Flash and evolve web typography. Although web typography is inevitably — and mistakenly — compared unfavourably to print, it has the potential to achieve the same refinement in a different way. Perhaps one day, the glyphs of our favourite faces, so carefully crafted, kerned and hinted for the screen, will be rendered with the same precision with which they were drawn by type designers and styled by web designers. That would be my wish for the new year. Happy holidays!",2008,Jon Tan,jontan,2008-12-17T00:00:00+00:00,https://24ways.org/2008/a-festive-type-folly/,design 102,Art Directing with Looking Room,"Using photographic composition techniques to start to art direct on the template-driven web. Think back to last night. There you are, settled down in front of the TV, watching your favourite soap opera, with nice hot cup of tea in hand. Did you notice – whilst engrossed in the latest love-triangle – that the cameraman has worked very hard to support your eye’s natural movement on-screen? He’s carefully framed individual shots to create balance. Think back to last week. There you were, sat with your mates watching the big match. Did you notice that the cameraman frames the shot to go with the direction of play? A player moving right will always be framed so that he is on the far left, with plenty of ‘room’ to run into. Both of these cameramen use a technique called Looking Room, sometimes called Lead Room. Looking Room is the space between the subject (be it a football, or a face), and the edge of the screen. Specifically, Looking Room is the negative space on the side the subject is looking or moving. The great thing is, it’s not just limited to photography, film or television; we can use it in web design too. Basic Framing Before we get into Looking Room, and how it applies to web, we need to have a look at some basics of photographic composition. Many web sites use imagery, or photographs, to enhance the content. But even with professionally shot photographs, without a basic understanding of framing or composition, you can damage how the image is perceived. A simple, easy way to make photographs more interesting is to fill the frame. Take this rather mundane photograph of a horse: A typical point and click affair. But, we can work with this. By closely cropping, and filling the frame, we can instantly change the mood of the shot. I’ve also added Looking Room on the right of the horse. This is space that the horse would be walking into. It gives the photograph movement. Subject, Space, and Movement Generally speaking, a portrait photograph will have a subject and space around them. Visual interest in portrait photography can come from movement; how the eye moves around the shot. To get the eye moving, the photographer modifies the space around the subject. Look at this portrait: The photography has framed the subject on the right, allowing for whitespace, or Looking Room, in the direction the subject is looking. The framing of the subject (1), with the space to the left (2) – the Looking Room – creates movement, shown by the arrow (3). Note the subject is not framed centrally (shown by the lighter dotted line). If the photographer had framed the subject with equal space either side, the resulting composition is static, like our horse. If the photographer framed the subject way over on the left, as she is looking that way, the resulting whitespace on the right leads a very uncomfortable composition. The root of this discomfort is what the framing is telling our eye to do. The subject, looking to the left, suggests to us that we should do the same. However, the Looking Room on the right is telling our eye to occupy this space. The result is a confusing back and forth. How Looking Room applies to the web We can apply the same theory to laying out a web page or application. Taking the three same elements – Subject, Space, and resulting Movement – we can guide a user’s eye to the elements we need to. As designers, or content editors, framing photographs correctly can have a subtle but important effect on how a page is visually scanned. Take this example: The BBC homepage uses great photography as a way of promoting content. Here, they have cropped the main photograph to guide the user’s eye into the content. By applying the same theory, the designer or content editor has applied considerable Looking Room (2) to the photograph to create balance with the overall page design, but also to create movement of the user’s eye toward the content (1) If the image was flipped horizontally. The Looking Room is now on the right. The subject of the photograph is looking off the page, drawing the user’s eye away from the content. Once again, this results in a confusing back and forth as your eye fights its way over to the left of the page. A little bit of Art Direction Art Direction can be described as the act or process of managing the visual presentation of content. Art Direction is difficult to do on the web, because content and presentation are, more often than not, separated. But where there are images, and when we know the templates that those images will populate, we can go a little way to bridging the gap between content and presentation. By understanding the value of framing and Looking Room, and the fact that it extends beyond just a good looking photograph, we can start to see photography playing more of an integral role in the communication of content. We won’t just be populating templates. We’ll be art directing. Photo credits: Portrait by Carsten Tolkmit Horse by Mike Pedroncelli",2008,Mark Boulton,markboulton,2008-12-05T00:00:00+00:00,https://24ways.org/2008/art-directing-with-looking-room/,design 93,Design Systems,"The most important part of responsive web design is that, no matter what the viewport width, the content is accessible in an optimum display. The best responsive designs are those that allow you to go from one optimised display to another, but with the feeling that these experiences are part of a greater product whole. Responsive design: where we’ve been going wrong Responsive web design was a shock to my web designer system. Those of us who had already been designing sites for mobile probably had the biggest leap to make. We might have been detecting user agents in order to deliver a mobile-specific site, or using the slightly more familiar Bushido technique to deliver sites optimised for device type and viewport size, but either way our focus was on devices. A site was optimised for either a mobile phone or a desktop. Responsive web design brought us back to pre-table layout fluid sites that expanded or contracted to fit the viewport. This was a big difference to get our heads around when we were so used to designing for fixed-width layouts. Suddenly, an element could be any width or, at least, we needed to consider its maximum and minimum widths. Pixel perfection, while pretty, became wholly unrealistic, and a whole load of designers who prided themselves in detailed and precise designs got a bit scared. Hanging on to our previous processes and typical deliverables led us to continue to optimise our sites for particular devices and provide pixel-perfect mockups for those device widths. With all this we were concentrating on devices, not content, deliverables and not process, and making assumptions about users and their devices based on nothing but the width of the viewport. I don’t think this is a crime, I think it was inevitable. We can be up to date with our principles and ideals, but it’s never as easy in practice. That’s why it’s more important than ever to share our successful techniques and processes. Let’s drag each other into modern web design. Design systems: the principles What are design systems? A visual design system is built out of the core components of typography, layout, shape or form, and colour. When considering the design of a whole product, a design system should also include patterns in user flow, content strategy, copy, and tone of voice. These concepts, design decisions or rules, created around the core components are used consistently across your product to create a cohesive feel, whether it’s from one element to another, page to page, or viewport width to viewport width. Responsive design is one of the most important considerations in the components of a design system. For each component, you must decide what will unite the design across the viewports to maintain that consistent feel, and what parts of the design will differentiate in order to provide a flexible and optimal experience for different viewport sizes. Components you might keep the same across viewports typeface base unit colour shape/form Components you might differentiate across viewports grids layout font size measure (line length) leading (line height) Content: it must always be the same The focus of a design system is the optimum display of content. As Mark Boulton put it, designing “content out, not canvas in.” Chris Armstrong puts the emphasis on not designing for viewports but for content – “we need to build on what we do know: content.” In order to do this, we must share the same content across all devices and focus on how best to display and represent content through design system components. The practical: core visual components Typography first When you work with a lot of text content, typography is the easiest way to set the visual tone of the design across all viewport widths. It’s likely that you’ll choose one or two typefaces to use across the whole system, but you might change the most legible font size, balanced with the most comfortable measure, as the viewport width changes. Where typography meets layout The unit on which you choose to base the grid and layout design, font sizes and leading could be based on the typeface, an optimal reading size, or something more arbitrary. Sometimes I’ll choose a unit based on multiples of ten because it makes the maths in the CSS easier. Tim Brown suggests trying a modular scale. Chris Armstrong suggests basing it on your ideal measure, or the width of a fixed item of content such as an ad unit. Grids and layouts Sensible grid design can be a flexible yet solid foundation for your design system layout component. But you must be wary in responsive design that a grid might not work across all widths: even four columns could make for very cramped content and one-word measures on smaller screens. Maybe the grid columns are something you differentiate across widths, but you can keep the concept of the grid consistent. If the content has blocks in groups of three, you might decide on a three-column grid which folds down to one column for narrow viewports. If the grid focuses on the idea of symmetry and has a four-column grid on larger viewports, it might fold down to two columns for narrower viewports. These consistencies may seem subtle, not at all obvious to many except the designer, but it’s all these little constants and patterns across the whole of the design system that makes design decisions easier to make (as they adhere to the guiding concepts of your system), and give the product a uniform feel no matter what the device. Shape or form The shape or form components are concepts you already use in fixed-width web design for a strong, consistent look and feel. Since CSS border-radius became widely supported by browsers, a lot of designs feature circle themes. These are very distinctive and can be used across viewport widths giving them the same united feel, even if they’re not used in the same way. This could also apply to border styles, consistent shadows and any number of decorative details and textures. These are the elements that make up the shape or form of a design system. Colour Colour is the most basic way to reinforce a brand and unite experiences across viewports. The same hex colour used system-wide is instantly recognisable, no matter what the viewport width. The process While using a design system isn’t necessarily attached to any particular process, it does lend itself to some process ideals. Detaching design considerations from viewport widths A design system allows you to focus separately on the components that make up the system, disconnecting the look and feel from the layout. This helps prevent us getting stuck in the rut of the Apple breakpoints (brilliantly coined by Simon Foster) of mobile, tablet and desktop. It also forces us to design for variation in viewport experiences side by side, not one after the other. Design in the browser I can’t start off designing in the browser – it just doesn’t seem to bring out my creative side (and I’m incredibly envious of you if you can; I just have to start on paper) – but static mock-ups aren’t the only alternative. Style guides and style tiles are perfect for expressing the concepts of your design system. Pattern libraries could also work well. Mock-ups and breakpoints At some point, whether it’s to test your system ideas, or because a client needs help visualising how your system might work, you may end up producing some static mock-ups. It’s not the end of the world, but you must ensure that these consider all the viewports, not just those of the iDevices, or even the devices currently on the market. You need to decide the breakpoints where the states of your design change. The blocks within your content will always have optimum points for their display (based on their hierarchy, density, width, or type of interaction) and so your breakpoints should be based around these points. These are probably the ideal points at which to produce static mockups; treat them as snapshots. They’re not necessarily mock-ups, so much as a way of capturing how your design system would be interpreted when frozen at that particular viewport width. The future Creating design systems will give us the flexibility we need for working with the unknown devices of the future. It may be a change in process, but it shouldn’t be too much of a difference in thinking. The pioneers in responsive design have a hard job. Some of these problems may have already been solved in other technologies or industries, but it’s up to the pioneers to find those connections and help us formulate solutions and standards that will make responsive design the best it can possibly be. We need to keep experimenting and communicating, particularly in the area of design, as good user experiences are the true sign of whether our products are a success.",2012,Laura Kalbag,laurakalbag,2012-12-12T00:00:00+00:00,https://24ways.org/2012/design-systems/,design 84,Responsive Responsive Design,"Now more than ever, we’re designing work meant to be viewed along a gradient of different experiences. Responsive web design offers us a way forward, finally allowing us to “design for the ebb and flow of things.” With those two sentences, Ethan closed the article that introduced the web to responsive design. Since then, responsive design has taken the web by storm. Seemingly every day, some company is touting their new responsive redesign. Large brands such as Microsoft, Time and Disney are getting in on the action, blowing away the once common criticism that responsive design was a technique only fit for small blogs. Certainly, this is a good thing. As Ethan and John Allsopp before him, were right to point out, the inherent flexibility of the web is a feature, not a bug. The web’s unique ability to be consumed and interacted with on any number of devices, with any number of input methods is something to be embraced. But there’s one part of the web’s inherent flexibility that seems to be increasingly overlooked: the ability for the web to be interacted with on any number of networks, with a gradient of bandwidth constraints and latency costs, on devices with varying degrees of hardware power. A few months back, Stephanie Rieger tweeted “Shoot me now…responsive design has seemingly become confused with an opportunity to reduce performance rather than improve it.” I would love to disagree, but unfortunately the evidence is damning. Consider the size and number of requests for four highly touted responsive sites that were launched this year: 74 requests, 1,511kb 114 requests, 1,200kb 99 requests, 1,298kb 105 requests, 5,942kb And those numbers were for the small screen versions of each site! These sites were praised for their visual design and responsive nature, and rightfully so. They’re very easy on the eyes and a lot of thought went into their appearance. But the numbers above tell an inconvenient truth: for all the time spent ensuring the visual design was airtight, seemingly very little (if any) attention was given to their performance. It would be one thing if these were the exceptions, but unfortunately they’re not. Guy Podjarny, who has done a lot of research around responsive performance, discovered that 86% of the responsive sites he tested were either the same size or larger on the small screen as they were on the desktop. The reality is that high performance should be a requirement on any web project, not an afterthought. Poor performance has been tied to a decrease in revenue, traffic, conversions, and overall user satisfaction. Case study after case study shows that improving performance, even marginally, will impact the bottom line. The situation is no different on mobile where 71% of people say they expect sites to load as quickly or faster on their phone when compared to the desktop. The bottom line: performance is a fundamental component of the user experience. So, given it’s extreme importance in the success of any web project, why is it that we’re seeing so many bloated responsive sites? First, I adamantly disagree with the belief that poor performance is inherent to responsive design. That’s not a rule – it’s a cop-out. It’s an example of blaming the technique when we should be blaming the implementation. This argument also falls flat because it ignores the fact that the trend of fat sites is increasing on the web in general. While some responsive sites are the worst offenders, it’s hardly an issue resigned to one technique. To fix the issue, we need to stop making excuses and start making improvements instead. Here, then, are some things we can do to start improving the state of responsive performance, and performance in general, right now. Create a culture of performance If you understand just how important performance is to the success of a project, the natural next step is to start creating a culture where high performance is a key consideration. One of the things you can do is set a baseline. Determine the maximum size and number of requests you are going to allow, and don’t let a page go live if either of those numbers is exceeded. The BBC does this with its responsive mobile site. A variation of that, which Steve Souders discussed in a recent podcast is to create a performance budget based on those numbers. Once you have that baseline set, if someone comes along and wants to add a something to the page, they have to make sure the page remains under budget. If it exceeds the budget, you have three options: Optimize an existing feature or asset on the page Remove an existing feature or asset from the page Don’t add the new feature or asset The idea here is that you make performance part of the process instead of something that may or may not get tacked on at the end. Embrace the pain This troubling trend of web bloat can be blamed in part on the lack of pain associated with poor performance. Most of us work on high-speed connections with low latency. When we fire up a 4Mb site, it doesn’t feel so bad. When I tested the previously mentioned 5,942kb site on a 3G network, it took over 93 seconds to load. A minute and a half just staring at a white screen. Had anyone working on that project experienced that, you can bet the site wouldn’t have launched in that state. Don’t just crunch numbers. Fire up your site on a slower network and see what it feels like to wait. If you don’t have access to a slow network, simulate one using a tool like Slowy, Throttle or the Network Conditioner found in Mac OS X 10.7. Watch for low-hanging fruit There are a bunch of general performance improvements that apply to any site (responsive or not) but often aren’t made. A great starting point is to refer to Yahoo!‘s list of rules. Some of this might sound complicated or intimidating, but it doesn’t have to be. You can grab an .htaccess file from HTML 5 Boilerplate or use Sergey Chernyshev’s drop-in .htaccess file. You can use tools like SpriteMe to simplify the creation of sprites, and ImageOptim to compress images. Just by implementing these simple optimizations you will achieve a noticeable improvement in terms of weight and page load time. Be careful with images The most common offender for poor responsive performance is downloading unnecessarily large images, or worse yet, multiple sizes of the same image. For background images, simply being careful with where and how you include the image can ensure you don’t get caught in the trap of multiple background images being downloaded without being used. Don’t count on display:none to help. While it may hide elements from displaying on screen, those images will still be requested and downloaded. Content images can be a little trickier. Whatever you do, don’t serve a large image that works on a large screen display to small screens. It’s wasteful, not only in terms of adding weight to the page, but also in wasting precious memory. Instead, use a tool like Adaptive Images or src.sencha.io to make sure only appropriately sized images are being downloaded. The new element that has been so often discussed is another excellent solution if you’re feeling particularly future-oriented. A picture polyfill exists so that you can start using the element now without any worries about support. Conditional loading Don’t load any more than you absolutely need to. If a script isn’t needed at certain sizes, use the matchMedia polyfill to ensure it only loads when needed. Use eCSSential to do the same for unnecessary CSS files. Last year on 24 ways, Jeremy Keith wrote an article about conditional loading of content in a responsive design based on the screen width. The technique was later refined by the Filament Group into what they dubbed the Ajax-Include Pattern. It’s a powerful and simple way to lighten the load on small screens as well as reduce clutter. Go vanilla? If you take a look at the HTTP Archive you’ll see that other than image size, JavaScript is the heaviest asset on a page weighing in at 215kb on average. It also boasts the fifth highest correlation to load time as well as the second highest correlation to render time. Much of the weight can be attributed to our industry’s increasing reliance on frameworks. This is especially a concern on mobile devices. PPK recently exclaimed that current JavaScript libraries are just “too heavy for mobile”. “Research from Stoyan Stefanov on parse times supports this. On some Android and iOS devices, it can take as long as 200-300ms just to parse jQuery. There’s nothing wrong about using a framework, but the problem is that they’ve become the default. Before dropping another framework or plugin into a page, we should stop to consider the value it adds and whether we could accomplish what we need to do using a combination of vanilla JavaScript and CSS instead. (This is a great example of a scenario where a performance budget could help.) Start thinking beyond visual aesthetics We love to tout the web’s universality when discussing the need for responsive design. But that universality is not limited simply to screen size. Networks and hardware capabilities must factor in as well. The web is an incredibly dynamic and interactive medium, and designing for it demands that we consider more than just visual aesthetics. Let’s not forget to give those other qualities the attention they deserve.",2012,Tim Kadlec,timkadlec,2012-12-05T00:00:00+00:00,https://24ways.org/2012/responsive-responsive-design/,design 81,Science!,"Sometimes we want to capture people’s attention at a glance to communicate something fast. At other times we want to have the interface fade away into the background, letting people paint pictures in their minds with our words (if you’ll forgive a little flowery festive flourish). I tend to distinguish between these two broad objectives as designing for impact on the one hand, and designing for immersion on the other. What defines them is interruption. Impact needs an attention-grabbing interruption. Immersion requires us to remove interruption from the interface. Careful design deliberately interrupts but doesn’t accidentally disrupt. If that seems to make sense to you, then you’ll find the following snippets of science as useful as I did. Saccades and fixations As you’re reading this your eyes are skipping along the lines in tiny jumps. During each jump everything is blurred. Each jump ends in a small pause so your brain can take a snapshot of the letters. It arranges them into words, and then parses out the meaning — fast — in around a quarter of a second. The jumps are called saccades. The pauses are called fixations. Sometimes we take regressive saccades, skipping back to reread. There’s a simple example in the excellent little book, Detail in Typography, by Jost Hochuli. If you want to explore the science of reading in much more depth, I recommend the excellent paper, “The Science of Word Recognition”, by Dr Kevin Larson of Microsoft. To design for legibility and readability is to design for saccades and fixations. It’s the craft of making it easy for people’s brains to extract meaning, using techniques like good contrast, font size, spacing and structure, and only interrupting the reading experience deliberately. Scan paths At some point when visiting 24 ways you probably scanned the screen to get orientated. The journey your eyes took is known as a scan path. Scan paths are made up of saccades and fixations. Right now you’re following a scan path as you read, along one line, and down to the next. This is a map of the scan paths found by Olivier Le Meur from observing people looking at Rembrandt’s Leçon d’anatomie: For websites, the scan path is a little different. This is an aggregate scan path of Google from LC Technologies: The average shape of a website scan path becomes clearer in this average scan path taken by forty-six people during research by the Poynter Institute, the Estlow Center for Journalism & New Media, and Eyetools: Just like when we read text arranged left to right in a vertical column, scan paths follow a roughly Z-shaped pattern from the top left to bottom right. Sometimes we skip back to reread a word or sentence, or glance again at a specific element, but the Z-shaped scan path persists. Designing for scan paths is to organise content to help people move through an interface to get orientated, and to read. The elements that are important enough to need impact must interrupt the scan path and clearly call attention to themselves. However, they don’t always need to clip people round the ear from multiple directions at once to get attention. It helps to list elements by importance. That gives us an interruption hierarchy to work with. Elements can then interrupt the design with degrees of contrast to the rest of the content using either positioning, treatment, or both. Ta-da! Impact achieved, but gently. No clips round the ear required. Swinging mood Human beings are resilient. Among the immersion and occasional interruptions, we even like a little disruption, especially if it’s absurd and funny. The Ling’s Cars website proves it. In fact, we’re so resilient that we can work around all kinds of mayhem to get a seemingly simple task done. In one study, “The Aesthetics of Reading” (PDF, 480Kb), Dr Kevin Larson of Microsoft and Dr Rosalind Picard of MIT explored the effect of good typography on mood. Two versions of the New Yorker ePeriodical were created. One was typeset well and the other poorly. They engaged twenty volunteers — half male, half female — and showed the good version to half of the participants. The other half saw the poor version. The good doctors found that, “there are important differences between good and poor typography that appear to have little effect on common performance measures such as reading speed and comprehension.” In short, good typography didn’t help people read faster or comprehend better. Oh. On the face of it that seems to invalidate what we designers do. Hold your horses, though! They also found that “the participants who received the good typography performed better on relative subjective duration and on certain cognitive tasks”, and that “good typography induces a good mood.” This means that even though there were no actual differences in reading speed and comprehension, the people who read the version with good typography thought that it took less time to read, and were induced into a good mood by doing so. Not only that, but by being in a good mood, people were more capable of completing creative tasks faster. That was a revelation to me. It means that the study showed there is a positive, measurable, emotional and perceptual benefit to good typography and design. To paraphrase: time and tasks fly when you’re having fun! Source: Nationaal Archief of the Netherlands: Cheering man after the first goal, Netherlands vs. Belgium, Amsterdam, 1931. So, among all my talk of saccades, fixations, scan paths and typesetting, there is science, and the science helps us qualify our design decisions when we need to, and do our jobs better. The science helps us understand how people will interact with our work, and what the actual benefits are for them, and the products or organisations we serve. Good design equals a subjectively quicker experience, a good mood, objectively faster completion of tasks, and happiness for everyone. Thank you, science!",2012,Jon Tan,jontan,2012-12-24T00:00:00+00:00,https://24ways.org/2012/science/,design 77,Colour Accessibility,"Here’s a quote from Josef Albers: In visual perception a colour is almost never seen as it really is[…] This fact makes colour the most relative medium in art.Josef Albers, Interaction of Color, 1963 Albers was a German abstract painter and teacher, and published a very famous course on colour theory in 1963. Colour is very relative — not just in the way that it appears differently across different devices due to screen quality and colour management, but it can also be seen differently by different people — something we really need to be more mindful of when designing. What is colour blindness? Colour blindness very rarely means that you can’t see any colour at all, or that people see things in greyscale. It’s actually a decreased ability to see colour, or a decreased ability to tell colours apart from one another. How does it happen? Inside the typical human retina, there are two types of receptor cells — rods and cones. Rods are the cells that allow us to see dark and light, and shape and movement. Cones are the cells that allow us to perceive colour. There are three types of cones, each responsible for absorbing blue, red, and green wavelengths in the spectrum. Problems with colour vision occur when one or more of these types of cones are defective or absent entirely, and these problems can either be inherited through genetics, or acquired through trauma, exposure to ultraviolet light, degeneration with age, an effect of diabetes, or other factors. Colour blindness is a sex-linked trait and it’s much more common in men than in women. The most common type of colour blindness is called deuteranomaly which occurs in 7% of males, but only 0.5% of females. That’s a pretty significant portion of the population if you really stop and think about it — we can’t ignore this demographic. What does it look like? People with the most common types of colour blindness, like protanopia and deuteranopia, have difficulty discriminating between red and green hues. There are also forms of colour blindness like tritanopia, which affects perception of blue and yellow hues. Below, you can see what a colour wheel might look like to these different people. What can we do? Here are some things you can do to make your websites and apps more accessible to people with all types of colour blindness. Include colour names and show examples One of the most common annoyances I’ve heard from people who are colour-blind is that they often have difficulty purchasing clothing and they will sometimes need to ask another person for a second opinion on what the colour of the clothing might actually be. While it’s easier to shop online than in a physical store, there are still accessibility issues to consider on shopping websites. Let’s say you’ve got a website that sells T-shirts. If you only show a photo of the shirt, it may be impossible for a person to tell what colour the shirt really is. For clarification, be sure to reference the name of the colour in the description of the product. United Pixelworkers does a great job of following this rule. The St. John’s T-shirt has a quirky palette inspired by the unofficial pink, white and green Newfoundland flag, and I can imagine many people not liking it. Another common problem occurs when a colour filter has been added to a product search. Here’s an example from a clothing website with unlabelled colour swatches, and how that might look to someone with deuteranopia-type colour blindness. The colour search filter below, from the H&M website, is much better since it uses names instead. At first glance, Urban Outfitters also uses unlabelled colour swatches on product pages (below), but on closer inspection, the colour name is displayed on hover. This isn’t an ideal solution, because although it’ll work on a desktop browser, it won’t work on a touchscreen device where hovering isn’t an option. Using overly fancy colour names, like the ones you might find labelling high-end interior paint can be just as confusing as not using a colour name at all. Names like grape instead of purple don’t really give the viewer any useful information about what the colour actually is on a colour wheel. Is grape supposed to be purple, or could it refer to red grapes or even green? Stick with hue names as much as possible. Avoid colour-specific instructions When designing forms, avoid labelling required fields only with coloured text. It’s safer to use a symbol cue like the asterisk which is colour-independent. A similar example would be directing a user to click a green button to purchase a product. Label your buttons clearly and reference them in the site copy by function, not colour, to avoid confusion. Don’t rely on colour coding Designing accessible maps and infographics can be much more challenging. Don’t rely on colour coding alone — try to use a combination of colour and texture or pattern, along with precise labels, and reflect this in the key or legend. Combine a blue background with a crosshatched pattern, or a pink background with a stippled dot — your users will always have two pieces of information to work with. The map of the London subway system is an iconic image not just in London, but around the world. Unfortunately, it contains some colours that are indistinguishable from each other to a person with a vision problem. This is true not only for the London underground, but also for any other wayfinding system that relies on colour coding as the only key in a legend. There are printable versions of the map available online in black and white, using patterns and shades of black and grey that are distinguishable, but the point is that there would be no need for such a map if it were designed with accessibility in mind from the beginning. And, if you’re a person who has a physical disability as well as a vision problem, the “Step-Free” guide map which shows stations is based on the original coloured map. Provide alternatives and customization While it’s best to consider these issues and design your app to be accessible by default, sometimes this might not be possible. Providing alternative styles or allowing users to edit their own colours is a feature to keep in mind. The developers of the game Faster Than Light created an alternate colour-blind mode and asked for public feedback to make sure that it passed the test. Not much needed to be done, but you can see they added stripes to the red zones and changed some outlines to blue. iChat is also a good example. Although by default it uses coloured bubbles to indicate a user’s status (available for chat, away or idle, or busy), included in the preferences is a “User Shapes to Indicate Status” option, which changes the shape of the standard circles to green circles, yellow triangles and red squares. Pay attention to contrast Colours that are similar in value but different in hue may be easy to distinguish between for a user with good vision, but a person who suffers from colour blindness may not be able to tell them apart at all. Proofing your work in greyscale is a quick way to tell if there’s enough contrast between the most important information in your design. Check with a simulator There are many tools out there for simulating different types of colour blindness, and it’s worth checking your design to catch any potential problems up front. One is called Sim Daltonism and it’s available for Mac OS X. It’ll show a pop-up preview next to your cursor and you can choose which type of colour blindness you want to test from a drop-down menu. You can also proof for the two most common types of colour blindness right in Photoshop or Illustrator (CS4 and later) while you’re designing. The colour contrast check tool from designer and developer Jonathan Snook gives you the option to enter a colour code for a background, and a colour code for text, and it’ll tell you if the colour contrast ratio meets the Web Content Accessibility Guidelines 2.0. You can use the built-in sliders to adjust your colours until they meet the compliant contrast ratios. This is a great tool to test your palette before going live. For live websites, you can use the accessibility tool called WAVE, which also has a contrast checker. It’s important to keep in mind, though, that while WAVE can identify contrast errors in text, other things can slip through, so a site that passes the test does not automatically mean it’s accessible in reality. For example, the contrast checker here doesn’t notice that our red link in the introduction isn’t underlined, and therefore could blend into the surrounding paragraph text. I know that once I started getting into the habit of checking my work in a simulator, I became more mindful of any potential problem areas and it was easier to avoid them up front. It’s also made me question everything I see around me and it sends red flags off in my head if I think it’s a serious colour blindness fail. Understanding that colour is relative in the planning stages and following these tips will help us make more accessible design for all.",2012,Geri Coady,gericoady,2012-12-04T00:00:00+00:00,https://24ways.org/2012/colour-accessibility/,design 74,Should We Be Reactive?,"Evolution Looking at the evolution of the web and the devices we use should help remind us that the times we’re adjusting to are just another step on a journey. These times seem to be telling us that we need to embrace flexibility. Imagine an HTML file containing nothing but text. It’s viewable on any web-capable device and reasonably readable: the notion of the universality of the web was very much a founding principle. Right from the beginning, browser vendors understood that we’d want text to reflow (why wouldn’t we?), so I consider the first websites to have been fluid. As we attempted to exert more control through our designs in the early days of the web, debates about whether we should produce fixed or fluid sites raged. We could create fluid designs using tables, but what we didn’t have then was a wide range of web capable devices or the ability to control this fluidity. The biggest changes occurred when stats showed enough people using a different screen resolution we could cater for. To me, the techniques of responsive web design provide the control we were missing. Combining new approaches to layout and images with media queries empowered us to learn how to embrace the inherent flexibility of the web in ways to suit our work and the devices used by our audience. Perhaps another kind of flexibility might be found in how we use context to affect how we present our content; to consider how we might use the information we can access from people, browsers and devices to provide web experiences – effectively creating sites that react to initial or changing circumstances in the relationship between people and our content. Embracing flexibility So what is context? Put simply, you could think of it as a secondary piece of information that helps clarify the meaning of the first. It helps set a scene or describe circumstances. I think that Cennydd Bowles has summed it up really well through talks he’s given recently, in which he’s arrived at the acronym DETAILS (Device, Environment, Time, Activity, Individual, Location, Social) – I encourage you to keep an eye out for his next book due in the new year where he’ll explore this idea much further. This clarity over what context could mean in terms of what we do on the web is fundamental, directing us towards ways we might use it. When you stop to think about it, we’ve been using some basic pieces of this information right from the beginning, like bits of JavaScript or Java applets that serve an appropriate greeting to your site’s visitors, or show their location, or even local weather. But what if we think of this from the beginning of our projects? We should think about our content first. Once we know this and have a direction, perhaps then we can think about what context, or even multiple contexts, might help us to communicate more effectively. The real world There’s always been a disconnect between the real world and the web, which is to be expected. But the world around us is a sea of data; every fundamental building block: people, places, events and things have information waiting to be explored. For sites based around physical objects or locations, this divide is really apparent. We don’t ordinarily take the time to describe in code the properties of a place, or consider whether your relationship to the place in the real world should have any impact on your relationship with a site about it. When I think about local businesses, they have such rich properties to draw on and yet we don’t really explore them in any meaningful way, even through something as simple as opening hours. Now we have data… We’ve long had access to the current time both on server- and client-sides. The use of geolocation is easier than ever, but when we look at the range of information we could glean to help us make some choices, maybe there’s some help on the horizon from projects like the W3C Device APIs Working Group. This might prove useful to help make us aware of network and battery conditions of a device, along with the potential to gain data from other sensors, which could tell us about lighting conditions, ambient noise levels and temperature depending on the capabilities of the device. It may be that our sites have some form of login or access to your profile from another site. Along with data from our devices and browsers, this should give us a sense of how best to talk to our audience in certain situations. We don’t necessarily need to know any personal details, just enough to make decisions about how to present our sites. The reactive web? So why reactive web design? I’m hoping that a name might help us to have a common vocabulary not only about what we mean when we talk about context, but how it could be considered through our projects, right from the early stages. How could this manifest itself? A simple example might be a location-aware panel on your site. Perhaps the space is a little down in your content hierarchy but serves a perfectly valid purpose by default. To visitors outside the country perhaps this works fine, but within your country maybe this panel could be used to communicate more effectively. Further still, if we knew the visitors were in the vicinity, we could talk to them more directly. What if both time and location were relevant? This space could work as before but you could consider how time could intersect with your local audience. If you know they’re local and it’s a certain time of day, you could communicate directly with them. This example isn’t beyond what banner ads often do and uses easily accessible information. There are more unusual combinations we may be able to find, such as movement and presence. Perhaps a site that tells a story, which changes design and content based on whether you’re moving, how long you’ve been on the site and how far you’ve travelled. This isn’t what we typically expect from websites, but we should bear in mind that what websites are now will not be what they become in the future. You could do much of this contextual presentation through native apps, of course. The Silent History, an app novel written and designed for iPad and iPhone, uses an exploration element, providing “hundreds of location-based stories across the U.S. and around the world. These can be read only when your device’s GPS matches the coordinates of the specified location.” But considering the universality of the web, we could redefine what web-based experiences should be like. Not all methods would work well on the web, but that’s a decision that has to be made for a specific project. By thinking more broadly about any web-capable device, we can use what we know to provide relevant experiences for our site’s visitors. We need to be sure what we mean by relevant, of course! Reality bites While there are incredible possibilities, from a simple panel on a site to something bordering on living sites that evolve and change with our circumstances, we need to act with a degree of pragmatism and understand how much of what we could do is based on assumptions and the bias of our own experiences. We could go wild with changing the way our content is presented based on contextual information, but if we’re not careful what we end up with confuses and could provide a very fractured experience. As much as possible we need to think more ethnographically, observe and question people in the situations we think may be relevant, and test our assumptions as early as we can. Even on small projects, there may be ways we can validate our assumptions and test with our audience. The key to applying contextual content or cues is not to break the experience between contextual views (as I think we now wouldn’t when hiding content on a mobile view). It’s another instance of progressive enhancement – as we know certain pieces of information, we can enhance the experience. Also, if you do change content, how can you not make a more cumbersome experience for your visitors? It’s all about communication Content is at the core of what we do, but if we consider context we need to understand the impact on that. The effect could be as subtle as an altered hierarchy, involve swapping out panels of content, or in extreme instances perhaps all of your content might change. In some ways, this extends the notion of adaptive content that Karen McGrane has been talking about, to how we write and store the content we create. Thinking about the the impact of context may require us to re-evaluate our site structure, too. Whatever we decide, we have to be clear what will happen and manage the expectations of our users. The bottom line What I’m proposing isn’t that we go crazy and end up with a confused, disjointed set of experiences across the web. What I hope is that starting right from the beginning of a project, we think about what context is and could be, and see what relevance it might have to what we’re trying to communicate. This strategic process leads us to think about design. We are slowly adapting to what it means to be flexible through responsive and adaptive processes. What does thinking about contextual states mean to us (or designing for state in general)? Does this highlight again how difficult it’ll be for our tools to keep up with our processes and output? In terms of code, the vast majority of this data comes from the client-side through JavaScript. While we can progressively enhance, this could lead to a lot of code bloat through feature or capability detection, and potentially a lot of conditional loading of scripts. It’s a real shame we don’t get much we can rely on from the server-side – we know how unreliable user agents are! We need to understand why we’d do this. Are we trying to communicate well and be useful, or doing it to show off? Underneath it all, what do we base our decisions on? Do we have actual insight or are we proceeding from our assumptions and the bias of our own experiences? Scott Jenson summed it up best for me: (to paraphrase) the pain we put people through has to be greatly outweighed by the value we offer. I see that this could be another potential step in our evolution on the web; continuing this exploration of the flexibility the web allows us. It’s amazing we can do such incredible things from what is essentially a set of disparate, linked documents.",2012,Dan Donald,dandonald,2012-12-09T00:00:00+00:00,https://24ways.org/2012/should-we-be-reactive/,design 73,How to Make Your Site Look Half-Decent in Half an Hour,"Programmers like me are often intimidated by design – but a little effort can give a huge return on investment. Here are one coder’s tips for making any site quickly look more professional. I am a programmer. I am not a designer. I have a degree in computer science, and I don’t mind Comic Sans. (It looks cheerful. Move on.) But although I am a programmer, I want to make my sites look attractive. This is partly out of vanity, and partly realism. Vanity because I want people to think my work is good, and realism because the research shows that people won’t think a site is credible unless it also looks attractive. For a very long time after I became a programmer, I was scared of design. Design seemed to consist of complicated rules that weren’t written down anywhere, plus an unlearnable sense of taste, possessed only by a black-clad elite. But a little while ago, I decided to do my best to hack what it took to make my own projects look vaguely attractive. And although this doesn’t come close to the effect a professional designer could achieve, gathering these resources for improving a site’s look and feel has been really helpful. If I hadn’t figured out some basic design shortcuts, it’s unlikely that a weekend hack of mine would have ended up on page three of the Daily Mail. And too often now, I see excellent programming projects that don’t reach the audience they deserve, simply because their design doesn’t match their execution. So, if you are a developer, my Christmas present to you is this: my own collection of hacks that, used rightly, can make your personal programming projects look professional, quickly. None are hard to learn, most are free, and they let you focus on writing code. One thing to note about these tips, though. They are a personal, pragmatic compilation. They are suggestions, not a definitive guide. You will definitely get better results by working with a professional designer, and by studying design more deeply. If you are a designer, I would love to hear your suggestions for the best tools that I’ve missed, and I’d love to know how we programmers can do things better. With that, on to the tools… 1. Use Bootstrap If you’re not already using Bootstrap, start now. I really think that Bootstrap is one of the most significant technical achievements of the last few years: it democratizes the whole process of web design. Essentially, Bootstrap is a a grid system, with a bunch of common elements. So you can lay your site out how you want, drop in simple elements like forms and tables, and get a good-looking, consistent result, without spending hours fiddling with CSS. You just need HTML. Another massive upside is that it makes it easy to make any site responsive, so you don’t have to worry about writing media queries. Go, get Bootstrap and check out the examples. To keep your site lightweight, you can customize your download to include only the elements you want. If you have more time, then Mark Otto’s article on why and how Bootstrap was created at Twitter is well worth a read. 2. Pimp Bootstrap Using Bootstrap is already a significant advance on not using Bootstrap, and massively reduces the tedium of front-end development. But you also run the risk of creating Yet Another Bootstrap Site, or Hack Day Design, as it’s known. If you’re really pressed for time, you could buy a theme from Wrap Bootstrap. These are usually created by professional designers, and will give a polish that we can’t achieve ourselves. Your site won’t be unique, but it will look good quickly. Luckily, it’s pretty easy to make Bootstrap not look too much like Bootstrap – using fonts, CSS effects, background images, colour schemes and so on. Most of the rest of this article covers different ways to achieve this. We are going to customize this Bootstrap example page. This already has some custom CSS in the . We’ll pull it all out, and create a new CSS file, custom.css. Then we add a reference to it in the header. Now we’re ready to start customizing things. 3. Fonts Web fonts are one of the quickest ways to make your site look distinctive, modern, and less Bootstrappy, so we’ll start there. First, we can add some sweet fonts, from Google Web Fonts. The intimidating bit is choosing fonts that look nice together. Luckily, there are plenty of suggestions around the web: we’re going to use one of DesignShack’s suggested free Google Fonts pairings. Our fonts are Corben (for headings) and Nobile (for body copy). Then we add these files to our . …and this to custom.css: h1, h2, h3, h4, h5, h6 { font-family: 'Corben', Georgia, Times, serif; } p, div { font-family: 'Nobile', Helvetica, Arial, sans-serif; } Now our example looks like this. It’s not going to win any design awards, but it’s immediately better: I also recommend the web font services Fontdeck, or Typekit – these have a wider selection of fonts, and are worth the investment if you regularly need to make sites look good. For more font combinations, Just My Type suggests appealing pairings from Typekit. Finally, you can experiment with type pairing ideas at Type Connection. For the design background on pairing fonts, Typekit’s post is worth a read. 4. Textures An instant way to make a site look classy is to use textures. You know the grey, stripy, indefinably elegant background on 24ways.org? That. If only there was a superb resource listing attractive, free, ready-to-use textures… Oh wait, there’s Atle Mo’s Subtle Patterns. We’re going to use Cream Dust, for an effect that can only be described as subtle. We download the file to a new /img/ directory, then add this to the CSS file: body { background: url(/img/cream_dust.png) repeat 0 0; } Bang: For some design background on patterns, I recommend reading through Smashing Magazine’s guidelines on textures. (TL;DR version: use textures to enhance beauty, and clarify the information architecture of your site; but don’t overdo it, or inadvertently obscure your text.) Still more to do, though. Onwards. 5. Icons Last year’s 24 ways taught us to use icon fonts for our site icons. This is great for the time-pressed coder, because icon fonts don’t just cut down on HTTP requests – they’re a lot quicker to set up than image-based icons, too. Bootstrap ships with an extensive, free for commercial use icon set in the shape of Font Awesome. Its icons are safe for screen readers, and can even be made to work in IE7 if needed (we’re not going to bother here). To start using these icons, just download Font Awesome, and add the /fonts/ directory to your site and the font-awesome.css file into your /css/ directory. Then add a reference to the CSS file in your header: Finally, we’ll add a truck icon to the main action button, as follows. Why a truck? Why not? Sign up today We’ll also tweak our CSS file to stop the icon nudging up against the button text: .jumbotron .btn i { margin-right: 8px; } And this is how it looks: Not the most exciting change ever, but it livens up the page a bit. The licence is CC-BY-3.0, so we also include a mention of Font Awesome and its URL in the source code. If you’d like something a little more distinctive, Shifticons lets you pay a few cents for individual icons, with the bonus that you only have to serve the icons you actually use, which is more efficient. Its icons are also friendly to screen readers, but won’t work in IE7. 6. CSS3 The next thing you could do is add some CSS3 goodness. It can really help the key elements of the site stand out. If you are pressed for time, just adding box-shadow and text-shadow to emphasize headings and standouts can be useful: h1 { text-shadow: 1px 1px 1px #ccc; } .div-that-you want-to-stand-out { box-shadow: 0 0 1em 1em #ccc; } We have a little more time though, so we’re going to do something more subtle. We’ll add a radial gradient behind the main heading, using an online gradient editor. The output is hefty, but you can see it in the CSS. Note that we also need to add the following to our HTML, for IE9 support: And the effect – I don’t know what a designer would think, but I like the way it makes the heading pop. For a crash course in useful modern CSS effects, I highly recommend CodeSchool’s online course in Functional HTM5 and CSS3. It costs money ($25 a month to subscribe), but it’s worth it for the time you’ll save. As a bonus, you also get access to some excellent JavaScript, Ruby and GitHub courses. (Incidentally, if you find yourself fighting with basic float and display attributes in CSS – and there’s no shame in it, CSS layout is not intuitive – I recommend the CSS Cross-Country course at CodeSchool.) 7. Add a twist We could leave it there, but we’re going to add a background image, and give the site some personality. This is the area of design that I think many programmers find most intimidating. How do we create the graphics and photographs that a designer would use? The answer is iStockPhoto and its competitors – online image libraries where you can find and pay for images. They won’t be unique, but for our purposes, that’s fine. We’re going to use a Christmassy image. For a twist, we’re going to use Backstretch to make it responsive. We must pay for the image, then download it to our /img/ directory. Then, we set it as our ’s background-image, by including a JavaScript file with just the following line: $.backstretch(""/img/winter.jpg""); We also reset the subtle pattern to become the background for our container image. It would look much better transparent, so we can use this technique in GIMP to make it see-through: .container-narrow { background: url(/img/cream_dust_transparent.png) repeat 0 0; } We also fiddle with the padding on body and .container-narrow a bit, and this is the result: (Aside: If this were a real site, I’d want to buy images in multiple sizes and ensure that Backstretch chose the most appropriately sized image for our screen, perhaps using responsive images.) How to find the effects that make a site interesting? I keep a set of bookmarks for interesting JavaScript and CSS effects I might want to use someday, from realistic shadows to animating grids. The JavaScript Weekly newsletter is a great source of ideas. 8. Colour schemes We’re just about getting there – though we’re probably past half an hour now – but that button and that menu still both look awfully Bootstrappy. Real sites, with real designers, have a colour palette, carefully chosen to harmonize and match the brand profile. For our purposes, we’re just going to borrow some colours from the image. We use Gimp’s colour picker tool to identify the hex values of the blue of the snow. Then we can use Color Scheme Designer to find contrasting, but complementary, colours. Finally, we use those colours for our central button. There are lots of tools to help us do this, such as Bootstrap Buttons. The new HTML is quite long, so I won’t paste it all here, but you can find it in the CSS file. We also reset the colour of the pills in the navigation menu, which is a bit easier: .nav-pills > .active > a, .nav-pills > .active > a:hover { background-color: #FF9473; } I’m not sure if the result is great to be honest, but at least we’ve lost those Bootstrap-blue buttons: Another way to do it, if you didn’t have an image to match, would be to borrow an attractive colour scheme. Colourlovers is a community where people create and share ready-made colour palettes. The key thing is to find a palette with an open licence, so you can legitimately use it. Unfortunately, you can’t search for palettes by licence type, but many do have open licences. Here’s a popular palette with a CC-BY-SA licence that allows reuse with attribution. As above, you can use the hex values from the palette in your custom CSS, and bask in the newly colourful results. 9. Read on With the above techniques, you can make a site that is starting to look slightly more professional, pretty quickly. If you have the time to invest, it’s well worth learning some design principles, if only so that design seems less intimidating and more like fun. As part of my design learning, I read a few introductory design books aimed at coders. The best I found was David Kadavy’s Design for Hackers: Reverse-Engineering Beauty, which explains the basic principles behind choosing colours, fonts, typefaces and layout. In the introduction to his book, David writes: No group stands to gain more from design literacy than hackers do… The one subject that is exceedingly frustrating for hackers to try to learn is design. Hackers know that in order to compete against corporate behemoths with just a few lines of code, they need to have good, clear design, but the resources with which to learn design are simply hard to find. Well said. If you have half a day to invest, rather than half an hour, I recommend getting hold of David’s book. And the journey is over. Perhaps that took slightly more than half an hour, but with practice, using the above techniques can become second nature. What useful tools have I missed? Designers, how would you improve on the above? I would love to know, so please give me your views in the comments.",2012,Anna Powell-Smith,annapowellsmith,2012-12-16T00:00:00+00:00,https://24ways.org/2012/how-to-make-your-site-look-half-decent/,design 72,Designing with Contrast,"When an appetite for aesthetics over usability becomes the bellwether of user interface design, it’s time to reconsider who we’re designing for. Over the last few years, we have questioned the signifiers that gave obvious meaning to the function of interface elements. Strong textures, deep shadows, gradients — imitations of physical objects — were discarded. And many, rightfully so. Our audiences are now more comfortable with an experience that feels native to the technology, so we should respond in kind. Yet not all of the changes have benefitted users. Our efforts to simplify brought with them a trend of ultra-minimalism where aesthetics have taken priority over legibility, accessibility and discoverability. The trend shows no sign of losing popularity — and it is harming our experience of digital content. A thin veneer We are in a race to create the most subdued, understated interface. Visual contrast is out. In its place: the thinnest weights of a typeface and white text on bright color backgrounds. Headlines, text, borders, backgrounds, icons, form controls and inputs: all grey. While we can look back over the last decade and see minimalist trends emerging on the web, I think we can place a fair share of the responsibility for the recent shift in priorities on Apple. The release of iOS 7 ushered in a radical change to its user interface. It paired mobile interaction design to the simplicity and eloquence of Apple’s marketing and product design. It was a catalyst. We took what we saw, copied and consumed the aesthetics like pick-and-mix. New technology compounds this trend. Computer monitors and mobile devices are available with screens of unprecedented resolutions. Ultra-light type and subtle hues, difficult to view on older screens, are more legible on these devices. It would be disingenuous to say that designers have always worked on machines representative of their audience’s circumstances, but the gap has never been as large as it is now. We are running the risk of designing VIP lounges where the cost of entry is a Mac with a Retina display. Minimalist expectations Like progressive enhancement in an age of JavaScript, many good and sensible accessibility practices are being overlooked or ignored. We’re driving unilateral design decisions that threaten accessibility. We’ve approached every problem with the same solution, grasping on to the integrity of beauty, focusing on expression over users’ needs and content. Someone once suggested to me that a client’s website should include two states. The first state would be the ideal experience, with low color contrast, light font weights and no differentiation between links and text. It would be the default. The second state would be presented in whatever way was necessary to meet accessibility standards. Users would have to opt out of the default state via a toggle if it wasn’t meeting their needs. A sort of first-class, upper deck cabin equivalent of graceful degradation. That this would divide the user base was irrelevant, as the aesthetics of the brand were absolute. It may seem like an unusual anecdote, but it isn’t uncommon to see this thinking in our industry. Again and again, we place the burden of responsibility to participate in a usable experience on others. We view accessibility and good design as mutually exclusive. Taking for granted what users will tolerate is usually the forte of monopolistic services, but increasingly we apply the same arrogance to our new products and services. Imitation without representation All of us are influenced in one way or another by one another’s work. We are consciously and unconsciously affected by the visual and audible activity around us. This is important and unavoidable. We do not produce work in a vacuum. We respond to technology and culture. We channel language and geography. We absorb the sights and sounds of film, television, news. To mimic and copy is part and parcel of creating something an audience of many can comprehend and respond to. Our clients often look first to their competitors’ products to understand their success. However, problems arise when we focus on style without context; form without function; mimicry as method. Copied and reused without any of the ethos of the original, stripped of deliberate and informed decision-making, the so-called look and feel becomes nothing more than paint on an empty facade. The typographic and color choices so in vogue today with our popular digital products and services have little in common with the brands they are meant to represent. For want of good design, the message was lost The question to ask is: does the interface truly reflect the product? Is it an accurate characterization of the brand and organizational values? Does the delivery of the content match the tone of voice? The answer is: probably not. Because every organization, every app or service, is unique. Each with its own personality, its own values and wonderful quirks. Design is communication. We should do everything in our role as professionals to use design to give voice to the message. Our job is to clearly communicate the benefits of a service and unreservedly allow access to information and content. To do otherwise, by obscuring with fashionable styles and elusive information architecture, does a great disservice to the people who chose to engage with and trust our products. We can achieve hierarchy and visual rhythm without resorting to extreme reduction. We can craft a beautiful experience with fine detail and curiosity while meeting fundamental standards of accessibility (and strive to meet many more). Standards of excellence It isn’t always comfortable to step back and objectively question our design choices. We get lost in the flow of our work, using patterns and preferences we’ve tried and tested before. That our decisions often seem like second nature is a gift of experience, but sometimes it prevents us from finding our blind spots. I was first caught out by my own biases a few years ago, when designing an interface for the Bank of England. After deciding on the colors for the typography and interactive elements, I learned that the site had to meet AAA accessibility standards. My choices quickly fell apart. It was eye-opening. I had to start again with restrictions and use size, weight and placement instead to construct the visual hierarchy. Even now, I make mistakes. On a recent project, I used large photographs on an organization’s website to promote their products. Knowing that our team had control over the art direction, I felt confident that we could compose the photographs to work with text overlays. Despite our best effort, the cropped images weren’t always consistent, undermining the text’s legibility. If I had the chance to do it again, I would separate the text and image. So, what practical things can we consider to give our users the experience they deserve? Put guidelines in place Think about your brand values. Write down keywords and use them as a framework when choosing a typeface. Explore colors that convey the organization’s personality and emotional appeal. Define a color palette that is web-ready and meets minimum accessibility standards. Note which colors are suitable for use with text. Only very dark hues of grey are consistently legible so keep them for non-essential text (for example, as placeholders in form inputs). Find which background colors you can safely use with white text, and consider integrating contrast checks into your workflow. Use roman and medium weights for body copy. Reserve lighter weights of a typeface for very large text. Thin fonts are usually the first to break down because of aliasing differences across platforms and screens. Check that the size, leading and length of your type is always legible and readable. Define lower and upper limits. Small text is best left for captions and words in uppercase. Avoid overlaying text on images unless it’s guaranteed to be legible. If it’s necessary to optimize space in the layout, give the text a container. Scrims aren’t always reliable: the text will inevitably overlap a part of the photograph without a contrasting ground. Test your work Review legibility and contrast on different devices. It’s just as important as testing the layout of a responsive website. If you have a local device lab, pay it a visit. Find a computer monitor near a window when the sun is shining. Step outside the studio and try to read your content on a mobile device with different brightness levels. Ask your friends and family what they use at home and at work. It’s one way of making sure your feedback isn’t always coming from a closed loop. Push your limits You define what the user sees. If you’ve inherited brand guidelines, question them. If you don’t agree with the choices, make the case for why they should change. Experiment with size, weight and color to find contrast. Objects with low contrast appear similar to one another and undermine the visual hierarchy. Weak relationships between figure and ground diminish visual interest. A balanced level of contrast removes ambiguity and creates focal points. It captures and holds our attention. If you’re lost for inspiration, look to graphic design in print. We have a wealth of history, full of examples that excel in using contrast to establish visual hierarchy. Embrace limitations. Use boundaries as an opportunity to explore possibilities. More than just a facade Designing with standards encourages legibility and helps to define a strong visual hierarchy. Design without exclusion (through neither negligence or intent) gets around discussions of demographics, speaks to a larger audience and makes good business sense. Following the latest trends not only weakens usability but also hinders a cohesive and distinctive brand. Users will make means when they need to, by increasing browser font sizes or enabling system features for accessibility. But we can do our part to take as much of that burden off of the user and ask less of those who need it most. In architecture, it isn’t buildings that mimic what is fashionable that stand the test of time. Nor do we admire buildings that tack on separate, poorly constructed extensions to meet a bare minimum of safety regulations. We admire architecture that offers well-considered, remarkable, usable spaces with universal access. Perhaps we can take inspiration from these spaces. Let’s give our buildings a bold voice and make sure the doors are open to everyone.",2015,Mark Mitchell,markmitchell,2015-12-13T00:00:00+00:00,https://24ways.org/2015/designing-with-contrast/,design 67,What I Learned about Product Design This Year,"2015 was a humbling year for me. In September of 2014, I joined a tiny but established startup called SproutVideo as their third employee and first designer. The role interests me because it affords the opportunity to see how design can grow a solid product with a loyal user-base into something even better. The work I do now could also have a real impact on the brand and user experience of our product for years to come, which is a thrilling prospect in an industry where much of what I do feels small and temporary. I got in on the ground floor of something special: a small, dedicated, useful company that cares deeply about making video hosting effortless and rewarding for our users. I had (and still have) grand ideas for what thoughtful design can do for a product, and the smaller-scale product design work I’ve done or helped manage over the past few years gave me enough eager confidence to dive in head first. Readers who have experience redesigning complex existing products probably have a knowing smirk on their face right now. As I said, it’s been humbling. A year of focused product design, especially on the scale we are trying to achieve with our small team at SproutVideo, has taught me more than any projects in recent memory. I’d like to share a few of those lessons. Product design is very different from marketing design The majority of my recent work leading up to SproutVideo has been in marketing design. These projects are so fun because their aim is to communicate the value of the product in a compelling and memorable way. In order to achieve this goal, I spent a lot of time thinking about content strategy, responsive design, and how to create striking visuals that tell a story. These are all pursuits I love. Product design is a different beast. When designing a homepage, I can employ powerful imagery, wild gradients, and somewhat-quirky fonts. When I began redesigning the SproutVideo product, I wanted to draw on all the beautiful assets I’ve created for our marketing materials, but big gradients, textures, and display fonts made no sense in this new context. That’s because the product isn’t about us, and it isn’t about telling our story. Product design is about getting out of the way so people can do their job. The visual design is there to create a pleasant atmosphere for people to work in, and to help support the user experience. Learning to take “us” out of the equation took some work after years of creating gorgeous imagery and content for the sales-driven side of businesses. I’ve learned it’s very valuable to design both sides of the experience, because marketing and product design flex different muscles. If you’re currently in an environment where the two are separate, consider switching teams in 2016. Designing for product when you’ve mostly done marketing, or vice versa, will deepen your knowledge as a designer overall. You’ll face new unexpected challenges, which is the only way to grow. Product design can not start with what looks good on Dribbble I have an embarrassing confession: when I began the redesign, I had a secret goal of making something that would look gorgeous in my portfolio. I have a collection of product shots that I admire on Dribbble; examples of beautiful dashboards and widgets and UI elements that look good enough to frame. I wanted people to feel the same way about the final outcome of our redesign. Mistakenly, this was a factor in my initial work. I opened Photoshop and crafted pixel-perfect static buttons and form elements and color palettes that — when applied to our actual product — looked like a toddler beauty pageant. It added up to a lot of unusable shininess, noise, and silliness. I was disappointed; these elements seemed so lovely in isolation, but in context, they felt tacky and overblown. I realized: I’m not here to design the world’s most beautiful drop down menu. Good design has nothing to do with ego, but in my experience designers are, at least a little bit, secret divas. I’m no exception. I had to remind myself that I am not working in service of a bigger Dribbble following or to create the most Pinterest-ing work. My function is solely to serve the users — to make life a little better for the good people who keep my company in business. This meant letting go of pixel-level beauty to create something bigger and harder: a system of elements that work together in harmony in many contexts. The visual style exists to guide the users. When done well, it becomes a language that users understand, so when they encounter a new feature or have a new goal, they already feel comfortable navigating it. This meant stripping back my gorgeous animated menu into something that didn’t detract from important neighboring content, and could easily fit in other parts of the app. In order to know what visual style would support the users, I had to take a wider view of the product as a whole. Just accept that designing a great product – like many worthwhile pursuits – is initially laborious and messy Once I realized I couldn’t start by creating the most Dribbble-worthy thing, I knew I’d have to begin with the unglamorous, frustrating, but weirdly wonderful work of mapping out how the product’s content could better be structured. Since we’re redesigning an existing product, I assumed this would be fairly straightforward: the functionality was already in place, and my job was just to structure it in a more easily navigable way. I started by handing off a few wireframes of the key screens to the developer, and that’s when the questions began rolling in: “If we move this content into a modal, how will it affect this similar action here?” “What happens if they don’t add video tags, but they do add a description?” “What if the user has a title that is 500 characters long?” “What if they want their video to be private to some users, but accessible to others?”. How annoying (but really, fantastic) that people use our product in so many ways. Turns out, product design isn’t about laying out elements in the most ideal scenario for the user that’s most convenient for you. As product designers, we have to foresee every outcome, and anticipate every potential user need. Which brings me to another annoying epiphany: if you want to do it well, and account for every user, product design is so much more snarly and tangled than you’d expect going in. I began with a simple goal: to improve the experience on just one of our key product pages. However, every small change impacts every part of the product to some degree, and that impact has to be accounted for. Every decision is based on assumptions that have to be tested; I test my assumptions by observing users, talking to the team, wireframing, and prototyping. Many of my assumptions are wrong. There are days when it’s incredibly frustrating, because an elegant solution for users with one goal will complicate life for users with another goal. It’s vital to solve as many scenarios as possible, even though this is slow, sometimes mind-bending work. As a side bonus, wireframing and prototyping every potential state in a product is tedious, but your developers will thank you for it. It’s not their job to solve what happens when there’s an empty state, error, or edge case. Showing you’ve accounted for these scenarios will win a developer’s respect; failing to do so will frustrate them. When you’ve created and tested a system that supports user needs, it will be beautiful Remember what I said in the beginning about wanting to create a Dribbble-worthy product? When I stopped focusing on the visual details of the design (color, spacing, light and shadow, font choices) and focused instead on structuring the content to maximize usability and delight, a beautiful design began to emerge naturally. I began with grayscale, flat wireframes as a strategy to keep me from getting pulled into the visual style before the user experience was established. As I created a system of elements that worked in harmony, the visual style choices became obvious. Some buttons would need to be brighter and sit off the page to help the user spot important actions. Some elements would need line separators to create a hierarchy, where others could stand on their own as an emphasized piece of content. As the user experience took shape, the visual style emerged naturally to support it. The result is a product that feels beautiful to use, because I was thoughtful about the experience first. A big takeaway from this process has been that my assumptions will often be proven wrong. My assumptions about how to design a great product, and how users will interact with that product, have been tested and revised repeatedly. At SproutVideo we’re about to undertake the biggest test of our work; we’re going to launch a small part of the product redesign to our users. If I’ve learned anything, it’s that I will continue to be humbled by the ongoing effort of making the best product I can, which is a wonderful thing. Next year, I hope you all get to do work that takes you out of our comfort zone. Be regularly confounded and embarrassed by your wrong assumptions, learn from them, and come back and tell us what you learned in 2016.",2015,Meagan Fisher,meaganfisher,2015-12-14T00:00:00+00:00,https://24ways.org/2015/what-i-learned-about-product-design-this-year/,design 61,Animation in Responsive Design,"Animation and responsive design can sometimes feel like they’re at odds with each other. Animation often needs space to do its thing, but RWD tells us that the amount of space we’ll have available is going to change a lot. Balancing that can lead to some tricky animation situations. Embracing the squishiness of responsive design doesn’t have to mean giving up on your creative animation ideas. There are three general techniques that can help you balance your web animation creativity with your responsive design needs. One or all of these approaches might help you sneak in something just a little extra into your next project. Focused art direction Smaller viewports mean a smaller stage for your motion to play out on, and this tends to amplify any motion in your animation. Suddenly 100 pixels is really far and multiple moving parts can start looking like they’re battling for space. An effect that looked great on big viewports can become muddled and confusing when it’s reframed in a smaller space. Making animated movements smaller will do the trick for simple motion like a basic move across the screen. But for more complex animation on smaller viewports, you’ll need to simplify and reduce the number of moving parts. The key to this is determining what the vital parts of the animation are, to zone in on the parts that are most important to its message. Then remove the less necessary bits to distill the motion’s message down to the essentials. For example, Rally Interactive’s navigation folds down into place with two triangle shapes unfolding each corner on larger viewports. If this exact motion was just scaled down for narrower spaces the two corners would overlap as they unfolded. It would look unnatural and wouldn’t make much sense. Open video The main purpose of this animation is to show an unfolding action. To simplify the animation, Rally unfolds only one side for narrower viewports, with a slightly different animation. The action is still easily interpreted as unfolding and it’s done in a way that is a better fit for the available space. The message the motion was meant to convey has been preserved while the amount of motion was simplified. Open video Si Digital does something similar. The main concept of the design is to portray the studio as a creative lab. On large viewports, this is accomplished primarily through an animated illustration that runs the full length of the site and triggers its animations based on your scroll position. The illustration is there to support the laboratory concept visually, but it doesn’t contain critical content. Open video At first, it looks like Si Digital just turned off the animation of the illustration for smaller viewports. But they’ve actually been a little cleverer than that. They’ve also reduced the complexity of the illustration itself. Both the amount of motion (reduced down to no motion) and the illustration were simplified to create a result that is much easier to glean the concept from. Open video The most interesting thing about these two examples is that they’re solved more with thoughtful art direction than complex code. Keeping the main concept of the animations at the forefront allowed each to adapt creative design solutions to viewports of varying size without losing the integrity of their design. Responsive choreography Static content gets moved around all the time in responsive design. A three-column layout might line up from left to right on wide viewports, then stack top to bottom on narrower viewports. The same approach can be used to arrange animated content for narrower views, but the animation’s choreography also needs to be adjusted for the new layout. Even with static content, just scaling it down or zooming out to fit it into the available space is rarely an ideal solution. Rearranging your animations’ choreography to change which animation starts when, or even which animations play at all, keeps your animated content readable on smaller viewports. In a recent project I had three small animations that played one after the other, left to right, on wider viewports but needed to be stacked on narrower viewports to be large enough to see. On wide viewports, all three animations could play one right after the other in sequence because all three were in the viewable area at the same time. But once these were stacked for the narrower viewport layouts, that sequence had to change. Open video What was essentially one animation on wider viewports became three separate animations when stacked on narrower viewports. The layout change meant the choreography had to change as well. Each animation starts independently when it comes into view in the stacked layout instead of playing automatically in sequence. (I’ve put the animated parts in this demo if you want to peek under the hood.) Open video I choose to use the GreenSock library, with the choreography defined in two different timelines for this particular project. But the same goals could be accomplished with other JavaScript options or even CSS keyframe animations and media queries. Even more complex responsive choreography can be pulled off with SVG. Media queries can be used to change CSS animations applied to SVG elements at specific breakpoints for starters. For even more responsive power, SVG’s viewBox property, and the positioning of the objects within it, can be adjusted at JavaScript-defined breakpoints. This lets you set rules to crop the viewable area and arrange your animating elements to fit any space. Sarah Drasner has some great examples of how to use this technique with style in this responsive infographic and this responsive interactive illustration. On the other hand, if smart scalability is what you’re after, it’s also possible to make all of an SVG’s shapes and motion scale with the SVG canvas itself. Sarah covers both these clever responsive SVG techniques in detail. Creative and complex animation can easily become responsive thanks to the power of SVG! Open video Bake performance into your design decisions It’s hard to get very far into a responsive design discussion before performance comes up. Performance goes hand in hand with responsive design and your animation decisions can have a big impact on the overall performance of your site. The translate3D “hack”, backface-visibility:hidden, and the will-change property are the heavy hitters of animation performance. But decisions made earlier in your animation design process can have a big impact on rendering performance and your performance budget too. Pick a technology that matches your needs One of the biggest advantages of the current web animation landscape is the range of tools we have available to us. We can use CSS animations and transitions to add just a dash of interface animation to our work, go all out with webGL to create a 3D experience, or anywhere in between. All within our browsers! Having this huge range of options is amazing and wonderful but it also means you need to be cognizant of what you’re using to get the job done. Loading in the full weight of a robust JavaScript animation library is going to be overkill if you’re only animating a few small elements here and there. That extra overhead will have an impact on performance. Performance budgets will not be pleased. Always match the complexity of the technology you choose to the complexity of your animation needs to avoid unnecessary performance strain. For small amounts of animation, stick to CSS solutions since it’s the most lightweight option. As your animations grow in complexity, or start to require more robust logic, move to a JavaScript solution that can accomplish what you need. Animate the most performant properties Whether you’re animating in CSS or JavaScript, you’re affecting specific properties of the animated element. Browsers can animate some properties more efficiently than others based on how many steps need to happen behind the scenes to visually update those properties. Browsers are particularly efficient at animating opacity, scale, rotation, and position (when the latter three are done with transforms). This article from Paul Irish and Paul Lewis gives the full scoop on why. Conveniently, those are also the most common properties used in motion design. There aren’t many animated effects that can’t be pulled off with this list. Stick to these properties to set your animations up for the best performance results from the start. If you find yourself needing to animate a property outside of this list, check CSS Triggers… to find out how much of an additional impact it might have. Offset animation start times Offsets (the concept of having a series of similar movements execute one slightly after the other, creating a wave-like pattern) are a long-held motion graphics trick for creating more interesting and organic looking motion. Employing this trick of the trade can also be smart for performance. Animating a large number of objects all at the same time can put a strain on the browser’s rendering abilities even in the best cases. Adding short delays to offset these animations in time, so they don’t all start at once, can improve rendering performance. Go explore the responsive animation possibilities for yourself! With smart art direction, responsive choreography, and an eye on performance you can create just about any creative web animation you can think up while still being responsive. Keep these in mind for your next project and you’ll pull off your animations with style at any viewport size!",2015,Val Head,valhead,2015-12-09T00:00:00+00:00,https://24ways.org/2015/animation-in-responsive-design/,design 59,Animating Your Brand,"Let’s talk about how we add animation to our designs, in a way that’s consistent with other aspects of our brand, such as fonts, colours, layouts and everything else. Animating is fun. Adding animation to our designs can bring them to life and make our designs stand out. Animations can show how the pieces of our designs fit together. They provide context and help people use our products. All too often animation is something we tack on at the end. We put a transition on a modal window or sliding menu and we often don’t think about whether that animation is consistent with our overall design. Style guides to the rescue A style guide is a document that establishes and enforces style to improve communication. It can cover anything from typography and writing style to ethics and other, broader goals. It might be a static visual document showing every kind of UI, like in the Codecademy.com redesign shown below. UI toolkit from “Reimagining Codecademy.com” by @mslima It might be a technical reference with code examples. CodePen’s new design patterns and style guide is a great example of this, showing all the components used throughout the website as live code. CodePen’s design patterns and style guide A style guide gives a wide view of your project, it maintains consistency when adding new content, and we can use our style guide to present animations. Living documents Style guides don’t need to be static. We can use them to show movement. We can share CSS keyframe animations or transitions that can then go into production. We can also explain why animation is there in the first place. Just as a style guide might explain why we chose a certain font or layout, we can use style guides to explain the intent behind animation. This means that if someone else wants to create a new component, they will know why animation applies. If you haven’t yet set up a style guide, you might want to take a look at Pattern Lab. It’s a great tool for setting up your own style guide and includes loads of design patterns to get started. There are many style guide articles linked from the excellent, open sourced, Website Style Guide Resources. Anna Debenham also has an excellent pocket book on the subject. Adding animation Before you begin throwing animation at all the things, establish the character you want to convey. Andrex Puppy (British TV ad from 1994) List some words that describe the character you’re aiming for. If it was the Andrex brand, they might have gone for: fun, playful, soft, comforting. Perhaps you’re aiming for something more serious, credible and authoritative. Or maybe exciting and intense, or relaxing and meditative. For each scenario, the animations that best represent these words will be different. In the example below, two animations both take the same length of time, but use different timing functions. One eases, and the other bounces around. Either might be good, depending on your needs. Timing functions (CodePen) Example: Kitman Labs Working with Kitman Labs, we spent a little time working out what words best reflected the brand and came up with the following: Scientific Precise Fast Solid Dependable Helpful Consistent Clear With such a list of words in hand, we design animation that fits. We might prefer a tween that moves quickly to its destination over one that drifts slowly or bounces. We can use the list when justifying our use of animation, such as when it helps our customers understand the context of data on the page. Or we may even choose not to animate, when that might make the message inconsistent. Create guidelines If you already have a style guide, adding animation could begin with creating an overview section. One approach is to create a local website and share it within your organisation. We recently set up a local site for this purpose. A recent project’s introduction to the topic of animation This document becomes a reference when adding animation to components. Include links to related resources or examples of animation to help demonstrate the animation style you want. Prototyping You can explain the intent of your animation style guide with live animations. This doesn’t just mean waving our hands around. We can show animation through prototypes. There are so many prototype tools right now. You could use Invision, Principle, Floid, or even HTML and CSS as embedded CodePens. A login flow prototype created in Principle These tools help when trying out ideas and working through several approaches. Create videos, animated GIFs or online demos to share with others. Experiment. Find what works for you and work with whatever lets you get the most ideas out of your head fastest. Iterate and refine an animation before it gets anywhere near production. Build up a collection Build up your guide, one animation at a time. Some people prefer to loosely structure a guide with places to put things as they are discovered or invented; others might build it one page at a time – it doesn’t matter. The main thing is that you collect animations like you would trading cards. Or Pokemon. Keep them ready to play and deliver that explosive result. You could include animated GIFs, or link to videos or even live webpages as examples of animation. The use of animation to help user experience is also covered nicely in Val Head’s UI animation and UX article on A List Apart. What matters is that you create an organised place for them to be found. Here are some ideas to get started. Logos and brandmarks Many sites include some subtle form of animation in their logos. This can draw the eye, add some character, or bring a little liveliness to an otherwise static page. Yahoo and Google have been experimenting with animation on their logos. Even a simple bouncing animation, such as the logo on Hop.ie, can add character. The CSS-animated bouncer from Hop.ie Content transitions Adding content, removing content, showing and hiding messages are all opportunities to use animation. Careful and deliberate use of animation helps convey what’s changing on screen. Animating list items with CSS (CSSAnimation.rocks) For more detail on this, I also recommend “Transitional Interfaces” by Pasquale D’Silva. Page transitions On a larger scale than the changes to content, full-page transitions can smooth the flow between sections of a site. Medium’s article transitions are a good example of this. Medium-style page transition (Tympanus.net) Preparing a layout before the content arrives We can use animation to draw a page before the content is ready, such as when a page calls a server for data before showing it. Optimistic loading grid (CodePen) Sometimes it’s good to show something to let the user know that everything’s going well. A short animation could cover just enough time to load the initial content and make the loading transition feel seamless. Interactions Hover effects, dropdown menus, slide-in menus and active states on buttons and forms are all opportunities. Look for ways you can remove the sudden changes and help make the experience of using your UI feel smoother. Form placeholder animation (Studio MDS) Keep animation visible It takes continuous effort to maintain a style guide and keep it up to date, but it’s worth it. Make it easy to include animation and related design decisions in your documentation and you’ll be more likely to do so. If you can make it fun, and be proud of the result, better still. When updating your style guide, be sure to show the animations at the same time. This might mean animated GIFs, videos or live embedded examples of your components. By doing this you can make animation integral to your design process and make sure it stays relevant. Inspiration and resources There are loads of great resources online to help you get started. One of my favourites is IBM’s design language site. IBM’s design language: animation design guidelines IBM describes how animation principles apply to its UI work and components. They break down the animations into five categories of animations and explain how they apply to each example. The site also includes an animation library with example videos of animations and links to source code. Example component from IBM’s component library The way IBM sets out its aims and methods is helpful not only for their existing designers and developers, but also helps new hires. Furthermore, it’s a good way to show the world that IBM cares about these details. Another popular animation resource is Google’s material design. Google’s material design documentation Google’s guidelines cover everything from understanding easing through to creating engaging and useful mobile UI. This approach is visible across many of Google’s apps and software, and has influenced design across much of the web. The site is helpful both for learning about animation and as an showcase of how to illustrate examples. Frameworks If you don’t want to create everything from scratch, there are resources you can use to start using animation in your UI. One such resource is Salesforce’s Lightning design system. The system goes further than most guides. It includes a downloadable framework for adding animation to your projects. It has some interesting concepts, such as elevation settings to handle positioning on the z-axis. Example of elevation from Salesforce’s Lightning design system You should also check out Animate.css. “Just add water” — Animate.css Animate.css gives you a set of predesigned animations you can apply to page elements using classes. If you use JavaScript to add or remove classes, you can then trigger complex animations. It also plays well with scroll-triggering, and tools such as WOW.js. Learn, evolve and make it your own There’s a wealth online of information and guides we can use to better understand animation. They can inspire and kick-start our own visual and animation styles. So let’s think of the design of animations just as we do fonts, colours and layouts. Let’s choose animation deliberately, making it part of our style guides. Many thanks to Val Head for taking the time to proofread and offer great suggestions for this article.",2015,Donovan Hutchinson,donovanhutchinson,2015-12-01T00:00:00+00:00,https://24ways.org/2015/animating-your-brand/,design 58,Beyond the Style Guide,"Much like baking a Christmas cake, designing for the web involves creating an experience in layers. Starting with a solid base that provides the core experience (the fruit cake), we can add further layers, each adding refinement (the marzipan) and delight (the icing). Don’t worry, this isn’t a misplaced cake recipe, but an evaluation of modular design and the role style guides can play in acknowledging these different concerns, be they presentational or programmatic. The auteur’s style guide Although trained as a graphic designer, it was only when I encountered the immediacy of the web that I felt truly empowered as a designer. Given a desire to control every aspect of the resulting experience, I slowly adopted the role of an auteur, exploring every part of the web stack: front-end to back-end, and everything in between. A few years ago, I dreaded using the command line. Today, the terminal is a permanent feature in my Dock. In straddling the realms of graphic design and programming, it’s the point at which they meet that I find most fascinating, with each dicipline valuing the creation of effective systems, be they for communication or code efficiency. Front-end style guides live at this intersection, demonstrating both the modularity of code and the application of visual design. Painting by numbers In our rush to build modular systems, design frameworks have grown in popularity. While enabling quick assembly, these come at the cost of originality and creative expression – perhaps one reason why we’re seeing the homogenisation of web design. In editorial design, layouts should accentuate content and present it in an engaging manner. Yet on the web we see a practice that seeks templated predictability. In ‘Design Machines’ Travis Gertz argued that (emphasis added): Design systems still feel like a novelty in screen-based design. We nerd out over grid systems and modular scales and obsess over style guides and pattern libraries. We’re pretty good at using them to build repeatable components and site-wide standards, but that’s sort of where it ends. […] But to stop there is to ignore the true purpose and potential of a design system. Unless we consider how interface patterns fully embrace the design systems they should be built upon, style guides may exacerbate this paint-by-numbers approach, encouraging conformance and suppressing creativity. Anatomy of a button Let’s take a look at that most canonical of components, the button, and consider what we might wish to document and demonstrate in a style guide. The different layers of our button component. Content The most variable aspect of any component. Content guidelines will exert the most influence here, dictating things like tone of voice (whether we should we use stiff, formal language like ‘Submit form’, or adopt a more friendly tone, perhaps ‘Send us your message’) and appropriate language. For an internationalised interface, this may also impact word length and text direction or orientation. Structure HTML provides a limited vocabulary which we can use to structure content and add meaning. For interactive elements, the choice of element can also affect its behaviour, such as whether a button submits form data or links to another page: Button text Note: One of the reasons I prefer to use